Loading ...
Loading ...
Loading ...
Adjusting the sound
Muting the sound
Press MUTE to temporarily reduce (112 MUTE) or turn off (MUTE)
the sound. While the sound is off, the screen will display "1/2
MUTE" or "MUTE" in the lower right corner. Every time you press
the button, the mute mode will change in the following order.
[-, Normal -+ 1/2 MUTE -+ MUTE --]
When you press MUTE, the closed caption feature is automatically
activated. To deactivate this feature, press MUTE again. This feature
works only when the closed caption mode is set to OFE See "Using
the closed caption feature" on page 45 for more information.
Selecting stereo/SAtP broadcasts
The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
1. Press MENU, and then press • or I_ until the AUDIO menu
appears.
2. Press • or • to highlight MTS.
3. Press • or I_ to highlight STEREO.
®@@8®@
@ AUDIO
TREBLE 50
BALANCE
RESET P
You can leave your TV in STEREO mode because it will
automatically output the type of sound being broadcast (stereo or
monaural). The word "STEREO" or "SAP" displays in yellow in
the menu when the TV receives the signal.
If the stereo sound is noisy, select MONO to reduce the noise.
To listen to SAP (if available):
1. Press MENU, and then press • or I_ until the AUDIO menu
appears.
2. Press • or • to highlight MTS.
3. Press • or I_ to highlight SAP. You will hear the station's second
audio program (if available) from the speakers, while viewing the
original program's picture (see note at right).
RECALL
MUTE
TV front panel
Note :
A second audio program (SAP) can be heard
only on those TVstations that offer it.
For example,a station might broadcast music
as a second audio program, ff you have SAP
on,you will seethe current program on the
screen but hear music instead of the
program's normal audio.
However, if you haveSAP on, and the station
you are watching is not currently
broadcasting a second audio program,you
willsee the picture but not hear any sound ff
this happens,put the TVin STEREOmode so
you can hear the station's normal audio.
47
Loading ...
Loading ...
Loading ...