Loading ...
Loading ...
Loading ...
Connecting an audio system
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see "Turning off the built-in speakers"
on page 50).
You will need:
one pair of audio cables
Note:
Tohear sound when using an externalaudio amplifier,the
volume of both the TVand the amplifier must be set
above 0 (zeroj.
For example,if the volume of the TVis set to O,you will
not be able to hear anysound, even the volume of the
amplifier is at its highest level
Connecting an PJV receiver
This connection allows you to use an audio/video (A/V) receiver to
enhance your TV's sound.
If you have a system with Dolby Pro Logic ® surround sound, you can
add to the realism of the sound by using the TV's internal speakers as
center channel speakers.
You will need:
one coaxial cable
one set of standard A/V cables
one single audio cable for the audio center channel
From Antenna
TV
From To TV IN From
video OUT Center OUT
\ I
I
To A/V Receiver
Note:
Refer to the instructionsprovided with your A/V receiver
for detailsabout your surround sound system.
When the Audio Center Channel ON/OFF switch is in
the ON position, the TVspeakerswill function only as
center channelspeakers.
Adjust the volume for the center channel speakers
using the center level control on theA/V receive_
Touse the TVspeakersas normal speakers,set the
Audio Center Channel ON/OFF switch to the OFF
position.
TV
Amplifier
Caution:
Toavoid damaging the speakers.
Tumoffthe TVbefore connecting or
disconnecting the Audio Center Channel
audio cable.
Do not connect from the A/Vreceiver's
Center Speaker OUT (amplified signal) to
the TV'sAudio Center Channel IN.
Dolby Pro Logic* surround sound
system connection example
Surround ,-, Surround
speaker L _ speaker R
* Dolby ProLogic is a registered trademark
of Dolby Laboratories Licensing
Corporation.
13
Loading ...
Loading ...
Loading ...