Loading ...
Loading ...
Loading ...
44
SERVICING AND CLEANING (Cont.)
3. Unfasten the two backburner nuts (found on the left
side of the backburner) using a
1
/
4
" nut driver and
set them aside. See Fig. 44-2.
4. Remove the backburner by lifting the left side outward
and to the left. See Fig. 44-3.
5. Use a
3
/
8
" hex nut driver to remove the exposed orifice
(Fig. 44-4). Check orifice. If needed, replace it with
the correct orifice for the new gas.
6. Replace the backburner assembly and fasten the two
nuts using a
1
/
4
" nut driver.
7. Replace the backburner cover and warming rack.
Fig. 44-1
Fig. 44-3
Fig. 44-4
Fig. 44-2
Orice
Convert/Check Infrared Burner Orifice (if
equipped)
1. Remove the cooking grid from above the burner.
2. Using a Phillips-head screwdriver, unscrew and
detach the electrode assembly from the infrared
burner body.
3. Remove the infrared burner by lifting the back of the
burner up so that both tabs are freed from their slots,
then lift the burner toward the back of the fire box
and upward. Set the burner aside.
4. Use a
3
/
8
" hex nut driver to remove the exposed
orifice. Check orifice. If needed, replace it with the
correct orifice for the new gas.
5. Replace the infrared burner by first sliding it over the
orifice, then lowering the two tabs under the back of
the burner into the slots in the back burner rest.
6. Reattach the electrode assembly and replace the
grid so that the cutout section is in front.
Loading ...
Loading ...
Loading ...