ADJ DMX OPERATOR-384 User Manual

Loading ...

DMX Operator 384 Fade Time

ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 18

(1) Press and hold down the MODE button, then tap the Tap/Disp button. The LED display will display

“ONLY” or “ALL”, for 3 seconds, depending on the current setting. “ONLY” indicates that the

Pan/Tilt channels will only be aected by the fade time fader while “ALL” indicates that all

channels will be aected by the fade time fader.

(2) To change this setting, tap the Tap/Disp button while pressing and holding down the Mode button.

Doing so, should switch between the only and ALL options.

DMX Operator 384 MIDI Channel Setting

SET MIDI CHANNEL

(1) Press and hold down the Midi button for 2 seconds or until the LED-display displays “In:XX”.

“:XX” represents the current set midi channel.

(2) Use UP/DOWN BANK buttons to set your desired Midi channel from 01 to 16.

(3) Press and hold down the Midi button for 2 seconds or until all LED’s ash three times to save

your setting.

MIDI Control:

This unit can receive MIDI data to trigger or activate Banks 1-30, Chases 1-12 and the Blackout

function. See Midi chart below.

MIDI Note

0-11

12-19

50

51

52

Function

Turn on/off Chase1-12

Turn on/off Scene1-8

Enable/disable Audio

Enable/disable Auto

Enable/disable Blackout

Select Bank1-30

20-49

Loading ...

ADJ DMX OPERATOR-384 Products, , 384 Channel DMX 512 with 12 Chase Programs and 8 Faders