1. Home
  2. ADJ
  3. ADJ DMX OPERATOR-384 User Manual
  4. Page 13

ADJ DMX OPERATOR-384 Products, , 384 Channel DMX 512 with 12 Chase Programs and 8 Faders

User Manual - Page 13

For DMX OPERATOR-384.

PDF File Manual, 24 pages, Read Online | Download pdf file

DMX OPERATOR-384 photo
Loading ...
Loading ...
Loading ...
DMX Operator 384 Editing Scenes
(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator
in the LED-display ashes. Once the indicator is ashing, record mode is engaged and you may
release the Program button.
(2) Using the UP/Down BANK button, select the bank that contains the scene that you want to edit.
You can view the active bank in the LED-display.
(3) Press the Scene button, 1-8 , that you want to edit so the scene comes on.
(4) Select the xture or xtures that you wish to change settings for in the current scene by pressing
the relevant Fixture # buttons, 1-12. The selected xture LED’s should illuminate.
(5) Make your changes using the faders or joystick.
(6) Press the Midi/Rec button and then press the scene # button that you are editing. All LED’s will
ash three times to conrm that your new settings were saved.
(7) Press and hold down the Program button for approximately 2 seconds to exit. A ashing Blackout
indicator, in the LED-display, is indicative that you are out of program mode.
ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 11
DMX Operator 384 Copy A Scene
(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator
in the LED display ashes. Once the indicator is ashing, record mode is engaged and you may
release the Program button.
(2) Select the bank that contains the scene you want to copy with the Bank UP/DOWN buttons.
(3) Select the Scene # button, 1-8, that you want to copy.
(4) Use the UP/DOWN BANK buttons to change the scene bank if desired.
(5) Press the Midi/Rec button followed by the Scene # button, 1-8, that you want to copy the scene
to. All LED’s should ash three times to conrm and save settings.
(6) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator
in the LED display stops ashing. A ashing Blackout indicator, in the LED display, is indicative
that you are out of program mode.
Loading ...
Loading ...
Loading ...