ADJ DMX OPERATOR-384 User Manual

Loading ...

DMX Operator 384 Joystick Set Up

DELETE JOYSTICK PAN/TILT ASSIGNMENT

(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator

in the LED-display ashes. Once the indicator is ashing, record mode is engaged and you may

release the Program button.

(2) Press and hold down the MODE button and then tap the FINE button. The “Assign” and “Pan”

LED’s should illuminate.

(3) Select the xtures that you wish to delete the joystick Pan/Tilt settings for by pressing the relevant

FIXTURES # buttons, 1-12, so the relevant LED’s illuminate.

(4) Press and hold down the MODE button, and then tap the Auto/DEL button to delete the settings

for the selected xtures. All LED’s will ash three times to conrm that the settings were erased.

(5) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator

in the LED-display stops ashing. A ashing Blackout indicator in the LED display conrms that the

controller is out of Program mode.

DELETE PAN/TILT JOYSTICK SETTINGS FOR ALL FIXTURES

(1) Flip the Operator power switch to OFF. The switch is located at the rear of the unit.

(2) Simultaneously, press and hold down the Auto/Del and MODE buttons and ip the power switch

ON. All LED’s will ash three times to conrm that the Pan/Tilt settings were erased.

ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 9

DMX Operator 384 Manual Control

When powered ON, this console defaults to Manual/Blackout mode. All output will be in a blackout

state until the Blackout button is deselected. To determine blackout status there is an indicator light

in the display that ashes when engaged and OFF when disengaged. To gain manual control, disengage

blackout, select the xtures that you wish to control by selecting the relevant xture buttons on the

left then use the eight channel faders, joystick and the channel bank button to manually control

the xtures.

Note: in most cases, for the joystick to work, you must rst assign it. Please see the Assign

Joystick section of this manual.

Loading ...

ADJ DMX OPERATOR-384 Products, , 384 Channel DMX 512 with 12 Chase Programs and 8 Faders