ADJ DMX OPERATOR-384 User Manual

Loading ...

DMX Operator 384 Delete A Scene

ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 12

(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator

in the LED display stops ashing. Once the indicator is ashing, record mode is engaged and

you may release the Program button.

(2) Select the bank that contains the scene you want to delete with the Bank UP/DOWN buttons.

(3) Simultaneously, press the Auto/Del button then press the Scene # button, 1-8, that you want to

delete. All LED’s should ash three times to conrm that the scene was deleted.

(4) Repeat steps 2 & 3 to delete additional scenes.

(5) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator

in the LED-display stops ashing. A ashing Blackout indicator, in the LED-display, is indicative

that you are out of program mode.

(1) Flip the Operators power switch OFF which is located at the rear of the unit.

(2) Simultaneously, press and hold down the Program and Bank Down buttons and ip the power

switch ON. All LED’s will ash three times to conrm that all scenes were deleted.

DMX Operator 384 Delete All Scenes

Loading ...

ADJ DMX OPERATOR-384 Products, , 384 Channel DMX 512 with 12 Chase Programs and 8 Faders