Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 10
DMX Operator 384 Recording Scenes
(1) Select the xtures that you wish to include into your scene by pressing the FIXTURES # buttons,
1-12, so the selected xture LED’s illuminate.
(2) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator in
the LED display ashes. Once the indicator is ashing, record mode is engaged and you may
release the Program button.
(3) Set your scene using the eight Channel faders, joystick or Channel Bank button if needed. The
Channel Bank button should be used to switch between channel banks 1-8, 9-16, 17~24 and
25~32.
(4) Once you are satised with the look of your scene, press the MIDI/REC button to Record it.
(5) Using the BANK UP & DOWN buttons, select a scene bank to store to. There are 30 available
Scene Banks and you can view them in the LED-display by referring to the furthest two digits to
the right.
(6) Press a Scene button,1-8, to store to. Once pressed, all LED’s will ash indicating that your scene
was stored. There are 8 Scene buttons to store to for each bank. Make sure you select a dierent
scene button each time you store a scene so you don’t record over something that you wanted to
keep.
(7) To Record additional scenes, repeat steps 2 through 6.
(8) Once you’ve stored all of your scenes, press and hold down the Program button or approximately
2 seconds to exit. A ashing Blackout indicator in the LED-display, is indicative that you are out
of program mode.
Loading ...
Loading ...
Loading ...