Loading ...
Loading ...
Loading ...
DMX Operator 384 Chase Playback
ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 17
2. AUTO TRIGGER:
(1) Press the AUTO/Del button, the Auto Trigger indicator light will illuminate in the LED display. This
indicates you that you are now in the Auto trigger mode.
(2) Press the Chase # button, 1-12, that you wish to playback. The selected Chase LED should
illuminate and begin to play. You can select more than one chase # button at a time to create a
chase sequence.
(3) At any time, you can adjust the Speed and Fade fader to set your chase playback state. You can
also press the Tap/Disp button twice to establish a chase rate. The rate will be determined by the
tempo at which you press the Tap/Disp button.
3. AUDIO TRIGGER:
(1) Press the Music/Rec button, the Audio Trigger indicator light will illuminate in the LED display.
This indicates you that you are now in the Audio trigger mode.
(2) Press the Chase # button, 1-12, that you want to playback. The selected Chase LED should
illuminate and engage. The selected chase will trigger to sound via the internal microphone or to
audio via the line level input if connected. Pressing the Music/Rec button again will disengage
audio mode.
DMX Operator 384 Bank Copy & Fixture Copy
BANK COPY
(1) Enter the Program mode.
(2) Use the Bank UP/DOWN buttons to select the bank to be copied.
(3) Tap the Midi/Rec button, and then use the Bank UP/DOWN buttons to select the bank that you
want to copy to.
(4) Tap the Music/Bkc button. All LED’s will ash three times to conrm your bank copy operation.
FIXTURE COPY
(1) Enter the Program mode.
(2) Press the Fixture # button, 1-12, that you wish to copy.
(3) Using channel faders 1-8 or joystick, set your look for the light.
(4) Press and hold down the same Fixture button, then tap the Fixture # button that you want to copy
the same settings to.
Loading ...
Loading ...
Loading ...