Loading ...
Loading ...
Loading ...
DMX Operator 384 Editing Chases
ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 15
ADD A CHASE STEP
(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator in
the LED display ashes. Once the indicator is ashing, record mode is engaged and you may
release the Program button.
(2) Select the Chase # button, 1-12, that you wish to add a step to. The relevant Chase LED should
illuminate.
(3) Press the Tap/Disp button, the Step indicator light should illuminate in the LED display.
(4) Press the Bank UP/DOWN buttons to manually step through the chase steps. Find the chase step
that you wish to add a step after.
(5) Press the Tap/Disp button disengage Step mode. The Step indicator, in the LED display, should
be OFF.
(6) Using the BANK UP & DOWN buttons, select the scene bank, 1-30, that contains the scene you
want to add. You can view the scene banks in the LED display by referring to the furthest two
digits to the right.
(7) Press the Midi/Rec button to record the step into your chase. All LEDs should ash three times to
conrm that the chase step was added.
(8) Repeat steps 3 through 7 to add additional chase steps.
(9) Press and hold down the Program button for approximately 2 seconds to exit. A ashing Blackout
indicator, in the LED-display, is indicative that you are out of program mode.
DELETING CHASE STEPS
(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator in
the LED display ashes. Once the indicator is ashing, record mode is engaged and you may
release the Program button.
(2) Select the Chase # button, 1-12, that you want to delete a step in. The relevant chase LED should
illuminate.
(3) Press the Tap/Disp button, the Step indicator light should illuminate in the LED display.
(4) Press the Bank UP/DOWN buttons to manually step through the chase steps. Find the chase step
that you want to delete.
(5) Press the Auto/Del button to delete the chase step. All LED’s should ash three times to conrm
that the chase step was deleted.
(6) Repeat steps 4 & 5 to delete additional chase steps.
(7) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator
in the LED display stops ashing. A ashing Blackout indicator, in the LED display, is indicative
that you are out of program mode.
Loading ...
Loading ...
Loading ...