Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 13
DMX Operator 384 Scene Playback
1. MANUAL TRIGGER:
(1) When powered ON, this console defaults to Manual/Blackout mode. All output will be in a blackout
state until the Blackout button is deselected.To determine blackout status, there is an indicator
light in the display that ashes when engaged and OFF when disengaged. Press the Blackout
button so the indicator stops ashing.
(2) Press the Bank UP/DOWN buttons to select the scene bank that contains the scene that you
want to playback.
(3) Press the Scene # button, 1-8, that you want to playback. The selected scene will engage. Press
the same scene # button again to disable the scene or the Blackout button to bring all output to a
blackout state.
(4) Repeat steps 2 & 3 to manually playback additional scenes.
2. AUTO TRIGGER:
(1) Press the AUTO/Del button, the Auto Trigger indicator light will illuminate in the LED display. This
indicates you that you are now in the Auto trigger mode.
(2) Press the Bank UP/DOWN buttons to select a desired scene bank, 1-30, for automatic playback.
All eight scenes in the selected scene bank will sequence.
(3) At any time, you can adjust the Speed and Fade fader to the adjust your scene sequence playback
state. You can also press the Tap/Disp button twice to establish a sequence rate. The rate will be
determined by the tempo at which you press the Tap/Disp button. Pressing the Auto/Del button
again will disengage automatic playback mode.
3. AUDIO TRIGGER:
(1) Press the Music/Rec button, the Audio Trigger indicator light will illuminate in the LED display.
This indicates you that you are now in the Audio trigger mode.
(2) Press the Bank UP/DOWN buttons to select a desired scene bank, 1-30, or a chase # button,
1-12. The selected scene bank or chases will trigger to audio via the internal microphone or line
level input if connected. Pressing the Music/Rec button again will disengage audio mode.
Loading ...
Loading ...
Loading ...