Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - DMX Operator 384 User Manual Page 14
DMX Operator 384 Recording Chases
This product has 12 programmable chases. Each of which can store up to 240 scenes/steps. Please
see the below instructions for chase setting.
(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator in
the LED display ashes. Once the indicator is ashing, record mode is engaged and you may
release the Program button.
(2) Select a Chase # button, 1-12, that you wish to record to. The relevant Chase LED should illuminate.
(3) Using the BANK UP & DOWN buttons, select the scene bank, 1-30 , that contains the scene you
want added to your chase. You can view the scene banks in the LEDdisplay by referring to
the furthest two digits to the right.You can also set your scene using the eight Channel faders,
joystick, or Channel Bank button on the y if desired. The Channel Bank button should be used to
switch between channel banks 1-8, 9-16, 17~24 and 25~32.
(4) Press the Midi/REC button to record the chase step. All LED’s will ash three times to conrm that
the chase step was recorded.
(5) Repeat steps 3 & 4 to record additional steps.
(6) Once you’ve recorded all of your steps, press and hold down the Program button for approximately
2 seconds to exit. A fjashing Blackout indicator, in the LED display, is indicative that you are out
of program mode.
RECORDING A BANK OF SCENES TO A CHASE
(1) Press and hold down the Program button for approximately 2 seconds or until the PROG indicator in
the LED display ashes. Once the indicator is ashing, record mode is engaged and you may
release the Program button.
(2) Select a Chase # button, 1-12, that you wish to record to. The relevant Chase LED should illuminate.
(3) Using the BANK UP & DOWN buttons, select the scene bank, 1-30 , that you want added to your
chase. You can view the scene banks in the LED display by referring to the furthest two digits to
the right.
(4) Simultaneously press the Music/Bkc and Midi/Rec buttons to record the entire scene bank. All
LED’s will ash three times to conrm that the scene bank was recorded. Scenes will record in the
exact same sequence as stored in the bank.
(5) Repeat steps 3 & 4 to record additional scene banks.
(6) Once you’ve recorded all of your steps, press and hold down the Program button for approximately
2 seconds to exit. A ashing Blackout indicator,in the LED display, is indicative that you are out of
program mode.
Loading ...
Loading ...
Loading ...