Loading ...
Loading ...
Loading ...
Dash cam memory card below access panel (Replacing the Dash Cam Memory Card, page 10)
Mounting and Powering the Garmin Device in Your Vehicle
WARNING
This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.
Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference
with some internal medical devices, including pacemakers and insulin pumps. Keep the device and its mount
away from such medical devices.
NOTICE
Both the device and its mount contain magnets. Under certain circumstances, magnets may cause damage to
some electronic devices, including hard drives in laptop computers. Use caution when the device or its mount is
near electronic devices.
Before you use your device on battery power, you should charge it.
1 Plug the vehicle power cable into the mini-USB port on the mount.
2 Press the mount onto the suction cup until it snaps into place.
NOTE: The mount and suction cup may already be assembled in the package.
The Garmin logo on the mount should face right-side up. It is easiest to connect the mount and suction cup
when the hinged arm on the suction cup is closed. The mount and suction cup fit tightly, and you may need
to press hard to connect them.
3 Press the suction cup to the windshield, and flip the lever back toward the windshield.
4 Place the back of the device onto the magnetic mount.
5 Select an option:
• If your power cable has a vehicle power plug, plug it into a power outlet in your vehicle.
• If your power cable has bare wire connectors, follow the wiring diagram included with your cable to
connect the cable to vehicle power.
Getting Started 3
Loading ...
Loading ...
Loading ...