Loading ...
Loading ...
Loading ...
Pairing a BC
™
35 Backup Camera with a Garmin Navigation Device
You must enable the Wi‑Fi setting on your Garmin navigation device before you can connect to a camera.
The BC 35 wireless backup camera is compatible with some Garmin navigation devices with Android. Go to
garmin.com/bc35 for more information about device compatibility.
You can pair up to four BC 35 wireless backup cameras with your compatible Garmin navigation device.
1 Update your navigation device to the latest software.
Your device may not support the BC 35 camera without the latest software. For more information about
updating, see the owner's manual for your navigation device.
2 Turn on the Garmin navigation device, and bring it within 3 m (10 ft.) of the camera.
3 Select > Rear View.
4 Select an option:
• If this is the first camera you are connecting to the navigation device, select Add New Camera.
• If this is an additional camera you are connecting to the navigation device, select > Choose Camera >
Add New Camera.
5 Follow the on-screen instructions.
NOTE: The pairing code or password is located on the transmitter or the camera.
After you complete the pairing process with a camera for the first time, it connects automatically to the Garmin
navigation device.
Viewing the Backup Camera
Your device shows video from the connected backup camera in different ways, depending on how the camera
is connected to power.
1 Select an option to show video:
• If the camera is connected to a reverse lamp (recommended), place the vehicle into reverse.
The device automatically shows video from the backup camera.
• If the camera is connected to a steady power source, select > Rear View to manually view the camera.
2 Select an option to resume normal device operation:
• If the camera is connected to a reverse lamp (recommended), take the vehicle out of reverse.
The device automatically resumes normal operation.
• If the transmitter is connected to a steady power source, select to manually hide the camera.
Switching Cameras
When multiple backup cameras are transmitting to your device, you can switch between the views from the
cameras.
1 Select > Rear View.
2 Select > Choose Camera.
3 Select a camera.
The video feed from the camera appears, and the camera name appears at the top of the screen.
Connecting to a Wireless Display
You can show the contents of the device screen on a compatible external display wirelessly.
1 Bring your device near the wireless display.
2 Select Settings > Display > Cast.
3 Select a wireless display.
4 If necessary, enter the PIN.
Appendix 57
Loading ...
Loading ...
Loading ...