Loading ...
Loading ...
Loading ...
Operation
44
As a general rule, allow approx. time
and a half for double the quantity.
For a smaller quantity, shorten the
duration accordingly.
- the shape and material of the
container.
Food in oven?
The messageFood in oven? is a reminder
that the appliance should not be used
without food inside it.
Operating the appliance without food
can damage the appliance.
If the Start sensor is touched without the
door having first been opened, Food in
oven? will appear in the display. It is
possible that there is no food in the
appliance because the door has not been
opened for quite some time. Start is
blocked until the door is opened.
Interrupting or restarting a
programme
At any time you can . . .
. . . interrupt a programme:
Open the appliance door.
The time stops counting down.
Close the door appears in the display.
. . . continue a programme:
Close the door and touch the
sensor.
The programme will continue.
Altering settings
If you discover after starting a
programme that . . .
. . . the microwave power level is too
high or too low, you can
select a new level.
. . . the duration set is too short or too
long, you can
change the time using the arrow
sensors and continue the programme
(by touching the sensor).
Cancelling a programme
Touch the sensor twice or touch
the selected power level.
Cancel process appears in the display.
Confirm with OK.
At the end of a programme
A signal tone will sound when the
cooking programme is finished. The
oven interior lighting goes out.
The signal tone is repeated several
times. Finished appears in the display.
Touch the sensor for the selected
power level to confirm.
Keeping warm
The Keeping warmfunction switches on
automatically at the end of a cooking
programme which has used at least
450W, providing the door remains
closed and no sensors are pressed.
After approx. 2minutes, the food will be
kept warm using 80W for a maximum
period of 15minutes.
Keeping warm appears in the display.
Opening the door or operating one of
the sensors cancels the function.
The Keeping warmfunction cannot be
selected as a separate function.
You can deselect this function (see
“Settings”).
Loading ...
Loading ...
Loading ...