Loading ...
Loading ...
Loading ...
6. SECURE THE SLIDING PANELS
Extend the sliding panels to fill the window open-
ing using 4 screws (ITEM C) to secure them, as
shown in Figure 79.
7. INSTALL THE SASH SEAL AND SASH LOCK
• Cut the sash seal to the window width.
Stuff the sash seal between the glass and the
window to prevent air and insects from getting
into the room, as shown in Figure 79.
• Screw the sash lock (ITEM D) on using an ITEM
B screw, as shown in Figure 79.
WINDOW FRAME
1/4_" SEAL UPPER GUIDE
_= BO'FI-OMGUIDE
Figure 78
IF AIR CONDITIONER IS BLOCKED BY STORM
WINDOW FRAME
• If storm window presents interference, fasten a 2"
wide wood stripto inner window sill across the full
width of the sill. Wood stripshould be thick enough
to raise the height of the window sill so that the
unit can be installed without interference by the
storm window frame. See Figure 80.
Top ofwood stdp should be approximately 3/4"
higher than storm window frame or wood strip
(OUTDOORS) to help unitcondensation to drain
propedy to the outside.
• Install a second wood strip(approximately 6"long
1"wide and same thickness as first strip)in the
center of the outer sill flush against the back of the
inner sill. This will raise the L bracket as shown in
Figure80.
• If the distance between "STORM WINDOW
FRAME" and "WOOD STRIP MOUNTED ON TOP
OF INNER SILL" is more than 1", two wood stdps
are not necessary.
Figure 79
Sash seal
(ITEM F)
Sash lock
WOOD STRIP MOUNTED I" MAX.
ON TOP OF CLEARANCE_
INNER
SILL
3.2 AIR CONDITIONER REMOVAL
Turn the air conditioner off, disconnect the power
cord, remove the sash lock and the screws installed
through the top and bottom ofthe sliding panels.
Save all parts for later reinstallation.Close the slid-
ing panels. Keeping a firm gdp on the air condition-
er, raise the sash, and carefully tiltthe air condition-
er backward, draining any condensed water. Liftthe
air conditioner from the window. Remove the sash
seal from between the windows.
Figure 80
OUTER
SILL
INDOORS IOUTDOORS
• Airconditionemcoveredinthismanualposeanexces-
siveweighthazard.Twoor morepeopleareneededto
moveand installthe unit.
To preventinjuryorstrain,useproperliftingandcarry-
ingtechniqueswhenmovingunit.
• When handlingtheairconditioner,be carefultoavoid
cutsfromsharpmetalfins onfrontand rearcoils.
• Make sureairconditionerdoesnotfall duringremoval.
--33--
Loading ...
Loading ...
Loading ...