Loading ...
Loading ...
Loading ...
Tip
To access the setup menus manually, press
MENU and choose SETUP
Complete the Initial Setup
The menu system in your T\. allows the T\.'s features to work properly. The
first time you turn on your T\.", the setup screens appear.
Set the Menu Language
The first part of the setup allows you to select your preferred language for the
menu system.
If English is your preferred language, px_'ss OK. If you want to choose another
language, press the down a;row button until that language is highlighted, and
press OK.
Welcome Screen and Connection Confirmation
The next screen welcomes you to your new RCA T\.". Press OK to continue with
the setup. After the welcome screen, the initial setup asks you to make sure
that you've connected the HI)T\,' to your cable or antenna signal. Once you've
confirmed that the H1)TV is connected, press OK. The C>a_zel setzq_ screen
appears.
Complete the Auto Channel Search
The (i/.'>cl_z_,ls<'/ztpscreen lets you set your signal source and search for the
awdlable channels on that source. The Auto channel search allows the TV to
search for all the viewable channels on both of your tuners--for digital or
analog channels--or on each antenna separately. This is sometimes called az!to
prq_,ulmmi,z_.
When you first turn on your HDTV, it's set to search on both tuners.
To search for channels on the both tuners:
1. Make sure the 3'{q,_zal3bzzrce is set to Boil>. If it's not, use the right arrow to
change the setting to lJoth.
2. Press the down am)w button on your remote control to highlight A_za/qg
3"{_*_a/73'pc.
3. Use the right arrow button to choose the signal type yoci're receiving on the
analog tune_either Utlf¢/t'llf _A_lmz_a for an off-air antenna or C_bD,.
4. Press the down arrow button on your remote control to highlight AzHo
cha*z*zel.'_<'a*z'/'>.
5. Press OK to start the Auto channel search on both tuners.
When the channel search is complete, press OK to access the LLs!<<LalJH_s
scr_'_'n.
Note: The Auto Channel Search looks for channels for the Signal Source
you choose--analog, digital, or both. To perform the Auto Channel
Search for just one tuner separately, choose that tuner in step 1 above.
Then, complete the rest of the steps above.
C'hg_pter I 19
Loading ...
Loading ...
Loading ...