Loading ...
Loading ...
Loading ...
LNPUT
CMP!
y_
COMPONENT INPUT Lets you connect a component video source, such as a I)VI) [)layer.
• CMP1 Y PB 1_ (Component Video) Provides optimum picture quality because the
video is separated into thxx, e signals. Use three video-grade cables for the connection.
When using CMP1 Y PB PR, make stm' to connect left and right audio cables to the
CMP1 L and R Audio Input jacks.
• CMP1 L (Audio) Provides left audio connection. The left audio connector is usually
white.
o CMP1 R (Audio) Provides right audio connection. The right audio connector is usually
red.
COMPOSITE }NPUT$ )
COMPOSITE INPUTS Lets you connect another component such :is a VCR or 1)VI) player.
Its AI H)IO jacks are the same :is described for CMP1 above.
• VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2 Video)
because the color part of the picture is separated from the black and white part of the
picture. When using VI1)I S-VIDEO, make sure to connect left and right audio cables to
the VII)I LiMONO and R Audio Input jacks.
° VID1 V (Video) Provides composite video connection. The video connector is usually
yellow.
° VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a component
such as a VCR or DVD player. Their description is the same as VI1)I above.
Note: For each VID jack group (VID1 and VID2), you may connect either an S-Video or
Video cable. Do not connect both at the same time in either of the VID jack groups.
DVI-HDTV Input Lets you connect a component with a DVI output.
Important: The DgI-HDrg input is not intended for use with a computer.
• DVI (Digital Visual Interface) Provides an uncompressed, digital video interface
developed for high-bandwidIh digital connection. It supports the overlay of high-
resolution graphics needed by some electronic program guide navigation and other
interactive se,-_ices. 1)VI, when combined with HI)CP (High bandwidth Digital
Content Protection) technology, creates a protected digital connection. The I)VI-HI)T\,'
connection is designed to display either progressive scan (480p) or H1)TV (1080i)
signals at a bandwidth of up to 1.78 Gigabits per second.
• L (Audio) Provides left audio connection when using the 1)VI jack. The left audio
connector is usually white.
R (Audio) Provides right audio connection when using the 1)VI jack. The right audio
connector is usually red.
Note: Remember to connect the left and right audio cables because the DVI cable
carries only the picture signal, not the sound.
Chapter I 11
Loading ...
Loading ...
Loading ...