Loading ...
Loading ...
Loading ...
Start and driving
system is not changing gear automatically
due t
o a tr
affic situation.
Using Tiptronic with the selector lever
It is possible to change to Tiptronic mode,
both when the vehicle is stopped and while
driving.
●
Starting from the D/S position, move the
lever to the right. The instrument panel will
show whether the lever is in manual or Tip-
tronic mode (e.g. M4).
●
Push the lever forwards
+
or backwards
–
to move up or down a gear
›
›
›
Fig. 163.
●
To exit Tiptronic mode, move the lever to the
left.
Using Tiptronic with the steering wheel
paddles*
The gearshift paddles can be used when the
selector lever is in the D/S or M (Tiptronic)
positions.
●
Press the gearshift paddle
+
to select a
higher gear
›
›
›
Fig. 164.
●
Press the gearshift paddle
–
to select a
l
o
wer gear.
●
To exit the Tiptronic mode, pull the right-
hand lever towards the steering wheel for ap-
proximately 1 second or move the lever to the
left.
If the paddles are not operated for some time
and the lever is not in the Tiptronic selection
position, it will automatically exit from Tip-
tronic mode.
CAUTION
●
When acceler
ating, if a higher gear is not
selected, it will automatically change
shortly before reaching the maximum per-
mitted RPM.
●
Also, if a lower gear is selected, the sys-
tem will not change until it detects that the
engine will not reach its maximum RPM.
Driving with an automatic gearbox
The gearbox changes gear ratios automati-
cally as the v
ehicl
e moves.
The engine can only start with the selector
lever in position P or N. At low temperatures
(below -10 °C), the engine can only start with
the selector lever in position P..
Driving down hills
Under certain circumstances it may be ad-
vantageous to use the Tiptronic mode to se-
lect the gear manually according to driving
conditions
›››
.
Stop/Park
On l
e
vel ground, just use the lever to engage
position P. On slopes you should first apply
the parking brake and then set the lever to P.
This makes it easier to remove the lever from
position P when starting.
If the driver door is opened and the lever is
not in position P, the vehicle could move. The
following warning is displayed on the instru-
ment panel: Gear change: selector
lever in the drive position!. Addi-
tionally, a buzzer will sound.
Stopping on a downhill
Always apply the brake pedal firmly to pre-
vent the vehicle from moving; if necessary,
apply the electronic parking brake
›››
.
Do not accel
er
ate while a range of gears is
engaged to prevent the car from rolling
downhill
›››
.
St
ar
ting off uphill with the Auto Hold func-
tion
●
Once you have engaged a gear, take your
foot off the brake pedal and gently press the
accelerator.
Starting off uphill without the Auto Hold
function
●
Pull on the electronic parking brake button.
»
225
Loading ...
Loading ...
Loading ...