Loading ...
Loading ...
Loading ...
Operation
LED on the power socket
Flashing red
light:
There is an anomaly, e.g. dis-
connection due to a curr
ent
surge or overheating.
Disconnection due to overheating
When the temper
ature exceeds a certain val-
ue, the 230 volt socket inverter is automati-
cally disconnected. The disconnection pre-
vents overheating when the power consump-
tion of the connected devices is excessive or
the ambient temperature is very high. The
230-volt power supply can be used once
again after a cooling time. First unplug the
connector of the connected device and then
plug it back in again. This prevents the elec-
trical device from being switched on again if
this is not wanted.
WARNING
The electrical system is under high voltage!
●
Do not spill liquids onto the socket.
●
Do not plug adapters or extension cords
into the 230 v
olt power socket. Otherwise,
the integrated child lock will be unlocked
and the power socket will operate.
●
Do not insert conductive objects (a knit-
ting needle, for example) into the 230 volt
power socket.
WARNING
The power socket works only when the igni-
tion is on. Improper use may cause serious
injury or e
ven fire. Children should there-
fore not be left in the vehicle unattended if
the button is also left behind. Otherwise
there is a possibility that they may be in-
jured.
CAUTION
Always use the correct type of plugs to
avoid damaging the sock
ets.
CAUTION
●
230 volt po
wer socket:
–
Do not leave devices or connectors
that are too heavy (e.g. a transformer)
hanging directly from the power sock-
et.
–
Do not connect neon lamps.
–
Only connect devices to the socket if
the device and socket voltage match.
–
The built-in overload disconnect func-
tion prevents any electrical devices
that require a high start-up current
from turning on. In this case, unplug the
electrical device's power supply and
re-try the connection after about 10
seconds.
Note
●
The use of electrical appliances with the
engine s
witched off will cause a battery
discharge.
●
Should the connected appliance over-
heat, immediately switch it off and discon-
nect it from the socket.
●
Before switching the ignition on or off, un-
plug the appliances from the USB ports to
protect them from any damage caused by
fluctuations in voltage.
●
Some appliances may not work properly
when connected to the 230 volt sockets
due to a lack of power (watts).
154
Loading ...
Loading ...
Loading ...