Loading ...
Loading ...
Loading ...
Transport and practical equipment
CAUTION
Each hanger is designed for a maximum
load of 2.5 k
g.
Power sockets
Vehicl
e power sockets
Fig. 141
1
12 volt socket.
2
USB socket on
the r
ear part of the centr
e console.
Fig. 142 On the left side of the luggage com-
partment: 230 v
olt po
wer socket.
You can find 12 volt sockets on the front cen-
tr
e consol
e, in the rear part of the centre con-
sole (between the front seats) and in the lug-
gage compartment.
●
Lift the power socket cover
›››
Fig. 141
1
.
●
Insert the plug of the electrical appliance
int
o the po
wer socket.
Maximum power consumption
Power socket
Maximum power con-
sumption
12 Volts 120 Watts
230 Volts 150 watts (300 watt peaks)
Electrical equipment can be connected to
the 12 v
olt po
wer socket.
Make sure that the maximum power con-
sumption displayed on each outlet is not ex-
ceeded. The power consumption of devices is
shown on the model plate.
When connecting two or more electrical de-
vices at the same time, make sure that their
total consumption never exceeds 190 watts
›››
.
USB po
w
er sockets
Depending on the equipment and the coun-
try, the vehicle may also have USB connec-
tions exclusively for charging or as a power
socket.
These USB ports are located in the rear part
of the centre console, between the front
seats
›››
Fig. 141
2
. These connectors can
w
ork at a maximum po
wer of up to 10.5 W per
port.
They are not intended for file playback.
230 volt power socket*
With the engine running, the power socket
›››
Fig. 142 activates automatically as soon
as a connector is plugged in. If there is
enough power available, the socket can still
be used while the engine is off
›››
Connect an electrical device: Open the co
v-
er and insert the plug int
o the power socket
as far as possible to unlock the built-in child
lock. The socket only supplies power once
the child lock is unlocked.
LED on the power socket
Steady green
light:
The childproof lock is unlocked.
The socket is ready to operate.
Flashing green
light:
The ignition is switched off, but
there is enough po
wer available
to continue supplying the socket
with current for a maximum of 10
minutes. If the connector is un-
plugged before this time elap-
ses, the socket is disconnected
and cannot be used again until
the ignition is switched on again.
»
153
Loading ...
Loading ...
Loading ...