Loading ...
Loading ...
Loading ...
576
Charging a Battery in the Camera
Using USB Power Adapter PD-E1 (sold separately), you can charge
Battery Pack LP-E6N without removing it from the camera. Note that
Battery Pack LP-E6 cannot be charged this way. Also, charging
will stop if you operate the camera.
1
Connect the USB power adapter.
z
With the camera’s power switch to
<
2
>, insert the USB power adapter
plug fully into the digital terminal.
2
Connect the power cord.
z
Connect the power cord to the USB
power adapter and plug the other end
into a power outlet.
g
Charging begins, and the access
lamp (1) is lit in green. The LCD panel
indicates that charging is in progress.
(1)
z
When charging is nished, the access
lamp turns o and [FULL] is indicated
on the LCD panel. Unplug the power
cord and disconnect the USB power
adapter from the camera.
o
To protect batteries and keep them in optimal condition, do not charge
continuously for more than 24 hours.
o
In case of charging problems, the access lamp blinks in green, [Err] is
displayed on the LCD panel, and a protective circuit stops charging. In
this case, unplug the power cord, reattach the battery, and wait a few
minutes before plugging it in again. If the problem persists, contact your
dealer or nearest Canon Service Center.
Loading ...
Loading ...
Loading ...