Loading ...
Loading ...
Loading ...
48
Item
Description
RFID Chip
Param
Tag
Length
Specifies the EPC block bytes size within the RFID tag
memory. This value is set automatically by the RFID
calibration process and should not be changed.
Minimum
8
Maximum
64
Default
12
Note
This value is hidden if Higgs 3 tags are detected, and the
Higgs 3 EPC Len menu is shown instead.
EPC
Address
Specifies the starting location of the EPC block within the
RFID tag memory. Normally, this value is set automatically
by the RFID calibration process and should not be changed.
Minimum
0 (Default)
Maximum
32
Block Size
Specifies the maximum number of bytes written to the USR
block within the RFID tag memory at one time. Normally,
this value is set automatically by the RFID calibration
process and should not be changed.
Minimum
0
Maximum
32
Default
8
Diagnostics
These settings are used to run test procedures to help determine the
accuracy of the RFID system and troubleshoot it.
Read Tag
Reads the tag in range of the internal RFID coupler and
reports the tag data to the debug port and displays it on the
LCD. It is primarily intended for development verification by
checking that the system is working.
Note
This menu item does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler to
receive an accurate reading.
Read Tag
& Eject
This menu item works exactly the same as Read Tag,
except that after the printer reads the tag, it feeds the label
to the next top-of-form.
Note
This menu item does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler to
receive an accurate reading.
Loading ...
Loading ...
Loading ...