Loading ...
Loading ...
Loading ...
38
Setting
Description
Darkness
Set up the print darkness. Settings range from 0 to 30. You may need to
adjust the print density based on the selected media.
Print Speed
Set up the print speed. Settings range from:
2 to 8 for 203 dpi
2 to 6 for 300 dpi
Tear Off
Fine-tune the media stop location. Settings range from -120 dots to
120 dots.
Print Mode
Set the print mode.
Print Mode
Description
Tear Off
The top of the next label is aligned with the Print
Head burn line.
Peeler Off Enable the label Peeler Off mode.
Cutter Enable the label Cutter mode.
Print Width
Set the print width. Settings range from:
2 dots to 864 dots for 203 dpi
2 dots to 1248 dots for 300 dpi
List Fonts
Print the current printer fonts list to the label. The fonts can be stored in the
printer’s DRAM, Flash, or optional memory card.
List Images
Print the current printer images list to the label. The images can be stored
in the printer’s DRAM, Flash, or optional memory card.
List Formats
Print the current printer formats list to the label. The formats can be stored
in the printer’s DRAM, Flash, or optional memory card.
List Setup
Print the current printer configuration.
Control Prefix
Set the control prefix character.
Format Prefix
Set the format prefix character.
Delimiter Char
Set the delimiter character.
Media Power
Up
Set the media action you want when you turn the printer on.
Action
Description
Feed The printer ejects one label.
Calibration The printer calibrates the sensor levels,
determines the label length, and feeds one label.
Length The printer determines the label length and feeds
the label.
No Motion No action.
Loading ...
Loading ...
Loading ...