Loading ...
Loading ...
Loading ...
36
Setting
Description
Speed
Set up the print speed.
Density
Adjust the print darkness/lightness. Settings range from 0 to 15. You may
need to adjust the print density based on the media.
Direction
Specify print direction.
DIRECTION 0
DIRECTION 1
Print Mode
Set the print mode.
Print Mode
Description
None
The top of the next label is aligned with the Print Head
burn line (Tear Off Mode).
Batch Mode
When the image is printed, the Gap/Black Mark is fed
through the tear plate for tear away.
Peeler Mode
Enables label Peeler Mode.
Cutter Mode
Enables label Cutter Mode.
Cutter Batch
Cuts the label once at the end of the printing job.
Offset
Fine-tune the media stop location. Settings range from -999 dots to
999 dots.
Shift X
Fine-tune the print position. Settings range from -999 dots to 999 dots.
Shift Y
Reference X
Set the origin of the printer coordinate system horizontally and vertically.
Settings range from 0 dots to 999 dots.
Reference Y
Code Page
Set the international character set code page.
Country
Set the country code. Settings range from 1 to 358.
Note
If printing from the downloaded software/driver, the software/driver commands will overwrite
the settings set from the LCD.
FEED
Loading ...
Loading ...
Loading ...