Loading ...
Loading ...
Loading ...
42
Item
Description
Status
Check the Ethernet IP address and Mac address setting status.
Configure
DHCP:
Enable (On) or disable (Off) the Dynamic Host Configuration Protocol
(DHCP) network protocol.
Static IP:
Set the printer’s IP address, subnet mask, and gateway.
Note
For information about installing a printer driver, see section 4.1.4 Wired Network Connection
(Windows).
6.5.3 Wi-Fi Settings
Configure your printer's Wi-Fi connection and check its status.
To use this feature, set up the Enterprise configuration with the Brother Printer Management
Tool (BPM). For more information on setting Wi-Fi using BPM, see the Brother Printer
Management Tool Quick Start Guide on your model's Manuals page at support.brother.com
.
When the Wi-Fi module is connected, the Wi-Fi icon and IP address are displayed on the LCD
as shown below.
Note
Make sure both your wireless router/access point's and your printer's network settings are correctly
set up. For more information, see the documentation provided with your wireless router/access point,
or contact the router manufacturer, your system administrator, or Internet service provider.
Menu Interface Ethernet
Status
Configure
Loading ...
Loading ...
Loading ...