Loading ...
Loading ...
Loading ...
31
5.1.3 Printer Initialization
Printer initialization clears the printer's DRAM and restores its factory settings.
1. Turn off the printer.
2. Press and hold the Feed/Pause button, and then turn on the printer.
3. Release the button after the amber LED flashes five times and the LED is lit in green/red.
Note
The LED color will change as follows:
Amber (lit) red/amber (5 times) amber (5 times) green/red (5 times) green (5 times)
red (5 times) green (lit)
After the initialization, the following factory settings will be restored:
Parameter Default setting
Speed 76 mm/sec (3 ips)
Density 8
Label Width 4" (101.5 mm)
Label Height 4" (101.5 mm)
Sensor Type Gap sensor
Gap Setting 0.12" (3 mm)
Print Direction 0
Reference Point 0,0 (upper left corner)
Offset 0
Tear Mode On
Peeler Mode Off
Cutter Mode Off
Code Page 850
Country Code 001
Clear Flash Memory No
Loading ...
Loading ...
Loading ...