Loading ...
Loading ...
Loading ...
58
Using the Wi-Fi function
SQT0196 (ENG)
1 Press and hold [Wi-Fi] on the camera.
2 Start “Image App” on your smartphone.
3 Select [QR code], and then select [OK].
4 Using “Image App”, scan the QR code
displayed on the screen of the camera.
A QR code
• If you press [MENU/SET] on the camera, the QR code will
be enlarged. When it is difficult to scan the QR code, try
enlarging it.
(If the scanning is not successful, move the camera and the
smartphone further away from each other and try again or
use a connection method other than the QR code method.)
5 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
6 Press the home button to close the browser.
7 Turn on the Wi-Fi function in the setting menu of the smartphone.
8 Select the SSID displayed on the screen of the camera.
9 Return to the home screen, and then start “Image App”. (P57)
•
Steps 2 through 6 are not required from the second time on.
If you are using an iOS device [iPhone/iPod touch/iPad]
Using the QR code to set up a connection
A
IMAGE APP
Panasonic Corporation
Wi-Fi
DMC-FZ1000_PPC_eng.book 58 ページ ２０１４年５月３０日 金曜日 午後５時９分
Loading ...
Loading ...
Loading ...