Loading ...
Loading ...
Loading ...
10
Before Use
SQT0196 (ENG)
Care of the camera
Do not subject to strong vibration, shock, or pressure.
•
The lens, monitor, or external case may be damaged if used in the
following conditions.
It may also malfunction or image may not be recorded if you:
– Drop or hit the camera.
– Press hard on the lens or the monitor.
• When camera is not in use or when using the playback feature,
ensure that the lens is in the stored position, with lens cap on.
• There are times when rattling sounds or vibrations will come from
the camera, but these are due to the motion of the aperture, the
zoom and the motor and do not indicate a defect.
This camera is not dust/splash/water proof.
Avoid using the camera in places with a lot of dust, water, sand,
etc.
•
Liquid, sand and other foreign material may get into the space around
the lens, buttons, etc. Be particularly careful since it may not just cause
malfunctions, but it may also become irreparable.
– Places with a lot of sand or dust.
– Places where water can come into contact with this unit, such as when using it on a rainy day
or at the beach.
∫ About Condensation (When the lens, the viewfinder or
monitor is fogged up)
•
Condensation occurs when the ambient temperature or humidity
changes. Be careful of condensation since it causes lens,
viewfinder and monitor stains, fungus and camera malfunction.
• If condensation occurs, turn the camera off and leave it for about
2 hours. The fog will disappear naturally when the temperature of
the camera becomes close to the ambient temperature.
DMC-FZ1000_PPC_eng.book 10 ページ ２０１４年５月３０日 金曜日 午後５時９分
Loading ...
Loading ...
Loading ...