Please read these instructions carefully before using this product, and
save this manual for future use.
More detailed instructions on the operation of this camera are
contained in “Owner’s Manual for advanced features (PDF
format)” in the supplied DVD. Install it on your PC to read it.
Basic Owner’s Manual
Digital Camera
Model No. DMC-FZ1000
SQT0196-1
F0614YS1064
Register online at www.panasonic.com/register (U.S. customers only)
If you have any questions, visit:
USA : www.panasonic.com/support
Canada : www.panasonic.ca/english/support
PCP
SQT0196~Cover_eng.fm 1 ページ ２０１４年６月１２日 木曜日 午後１時４３分
2
SQT0196 (ENG)
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on the market
today. Used properly, we’re sure it will bring you and your family years of enjoyment.
Please take time to fill in the information below. The serial number is on the tag located on
the underside of your camera. Be sure to retain this manual as your convenient camera
information source.
Please note that the actual controls and components, menu items, etc. of your Digital Camera
may look somewhat different from those shown in the illustrations in this Owner’s Manual.
Carefully observe copyright laws.
•
Recording of pre-recorded tapes or discs or other published or broadcast material for purposes
other than your own private use may infringe copyright laws. Even for the purpose of private
use, recording of certain material may be restricted.
Information for Your Safety
A lithium ion battery that is recyclable powers the product you have
purchased. Please call 1-800-8-BATTERY for information on how to
recycle this battery.
WARNING:
To reduce the risk of fire, electric shock or product damage,
•
Do not expose this unit to rain, moisture, dripping or splashing.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to qualified service personnel.
The socket outlet shall be installed near the equipment and shall be easily accessible.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
DMC-FZ1000_PPC_eng.book 2 ページ ２０１４年５月３０日 金曜日 午後５時９分
3
(ENG) SQT0196
∫ Product identification marking
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Product Location
Digital Camera Bottom
Battery charger Bottom
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation
instructions and use only shielded interface cables with ferrite core when
connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-FZ1000
Responsible Party:Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://www.panasonic.com/contactinfo
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
DMC-FZ1000
DMC-FZ1000_PPC_eng.book 3 ページ ２０１４年５月３０日 金曜日 午後５時９分
4
SQT0196 (ENG)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
THE FOLLOWING APPLIES ONLY IN CANADA.
Certification and Compliance
See Camera for the certification and compliance mark specific to that device.
1 Select
[Wi-Fi]
in the [Setup] menu.
2 Select
[Wi-Fi Setup]
in the [Wi-Fi] menu.
3
Press
3/4 to select [Approved Regulations], and then press [MENU/SET]
.
Contains FCC ID: VPYLBXN604
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
This equipment has very low levels of RF energy that are deemed to comply without
testing of specific absorption ratio (SAR).
CAN ICES-3(B)/NMB-3(B)
This device complies with RSS-210 of the IC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,
(2)This device must accept any interference received,
including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed to comply without
testing of specific absorption ratio (SAR).
DMC-FZ1000_PPC_eng.book 4 ページ ２０１４年５月３０日 金曜日 午後５時９分
5
(ENG) SQT0196
∫ About the battery pack
•
Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
∫ About the battery charger
CAUTION
Battery pack (Lithium ion battery pack)
•
Use the specified unit to recharge the battery pack.
• Do not use the battery pack with equipment other than the specified unit.
• Do not get dirt, sand, liquids, or other foreign matter on the terminals.
• Do not touch the plug terminals (i and j) with metal objects.
• Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes, wash it off
thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse
eyes thoroughly with water, and then consult a doctor.
CAUTION
•
Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
• When disposing of the batteries, please contact your local authorities or dealer and ask for
the correct method of disposal.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC (140 oF) or
incinerate.
CAUTION!
To reduce the risk of fire, electric shock or product damage,
•
Do not install or place this unit in a bookcase, built-in cabinet or in another confined
space. Ensure this unit is well ventilated.
Battery charger
This battery charger operates on AC between 110 V and 240 V.
But
•
In the U.S.A. and Canada, the battery charger must be connected to a 120 V AC power
supply only.
• When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to
suit the AC outlet configuration.
DMC-FZ1000_PPC_eng.book 5 ページ ２０１４年５月３０日 金曜日 午後５時９分
6
SQT0196 (ENG)
• Do not use any other USB connection cables except the supplied one or a genuine Panasonic
USB connection cable (DMW-USBC1: optional).
• Use a “High Speed HDMI micro cable” with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI micro cable” [Type D–Type A plug, up to 2 m (6.6 feet) long]
• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
• Always use a genuine Panasonic remote shutter (DMW-RSL1: optional).
Keep this unit as far away as possible from electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
•
If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be
disrupted by electromagnetic wave radiation.
• Do not use this unit near cell phones because doing so may result in noise adversely affecting
the pictures and/or sound.
• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields
created by speakers or large motors.
• Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures and/or
sound.
• If this unit is adversely affected by electromagnetic equipment and stops functioning properly,
turn this unit off and remove the battery or disconnect AC adaptor (DMW-AC10PP: optional).
Then reinsert the battery or reconnect AC adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
•
If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound
may be adversely affected.
Cautions for Use
DMC-FZ1000_PPC_eng.book 6 ページ ２０１４年５月３０日 金曜日 午後５時９分
7
(ENG) SQT0196
• Before cleaning the camera, remove the battery or the DC coupler (DMW-DCC8:
optional), or disconnect the power plug from the outlet.
• Do not press the monitor with excessive force.
• Do not press the lens with excessive force.
• Do not spray the camera with insecticides or volatile chemicals.
• Do not keep rubber or plastic products in contact with the camera for a long period of
time.
• Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean
the camera, since it may deteriorate the external case or the coating may peel off.
• Do not leave the camera with the lens facing the sun, as rays of light from the sun may
cause it to malfunction.
• Always use the supplied cords and cables.
• Do not extend the cords or the cables.
• During access (image writing, reading and deleting, formatting etc.), do not turn this unit
off, remove the battery, card or disconnect the AC adaptor (DMW-AC10PP: optional).
Furthermore, do not subject the camera to vibration, impact or static electricity.
• The data on the card may be damaged or lost due to electromagnetic waves, static electricity or
breakdown of the camera or the card. We recommend storing important data on a PC etc.
• Do not format the card on your PC or other equipment. Format it on the camera only to ensure
proper operation.
• The battery is not charged when the camera is shipped. Charge the battery before use.
• The battery is a rechargeable lithium ion battery. If the temperature is too high or too
low, the operating time of the battery will become shorter.
• The battery becomes warm after using and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
• Do not leave any metal items (such as clips) near the contact areas of the power plug or
near the batteries.
• Store the battery in a cool and dry place with a relatively stable temperature: [Recommended
temperature: 15 oC to 25 oC (59 oF to 77 oF), Recommended humidity: 40%RH to 60%RH]
• Do not store the battery for a long time while fully charged. When storing the battery for a
long period of time, we recommend charging it once a year. Remove the battery from the
camera and store it again after it has completely discharged.
-If you see this symbol-
Information on Disposal in other Countries outside the European
Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or
dealer and ask for the correct method of disposal.
DMC-FZ1000_PPC_eng.book 7 ページ ２０１４年５月３０日 金曜日 午後５時９分
8
SQT0196 (ENG)
Contents
Information for Your Safety................. 2
• Cautions for Use.............................. 6
Before Use
Care of the camera............................. 10
Standard Accessories ....................... 11
Names and Functions of
Components ....................................... 12
Preparations before Recording ........ 14
• Attaching the Lens Hood ............... 14
• Attaching the Lens Cap ................. 14
• Attaching the Shoulder Strap......... 15
• Monitor .......................................... 15
• [LVF] button (Switching the Monitor/
Viewfinder) .................................... 16
• Charging the Battery ..................... 16
• Inserting and Removing the Card
(optional)/the Battery..................... 17
•
Formatting the card (initialization)
.... 18
• Setting Date/Time (Clock Set)....... 18
Basic Operation
Setting the Menu ................................ 19
• Calling frequently-used menus
instantly (Quick Menu) .................. 20
Tips for taking good pictures............ 20
Selecting the Recording Mode.......... 21
Taking a Still picture .......................... 22
Recording Motion Picture ................. 22
Switching the Information Displayed
on the recording screen...................... 24
Playing Back Pictures/
Motion Pictures .................................. 25
• Playing Back Pictures.................... 25
• Playing Back Motion Pictures........ 26
Deleting Pictures................................ 27
Recording Modes
Taking Pictures using the Automatic
Function
(Intelligent Auto Mode).......................28
• Recording night scenes
([iHandheld Night Shot]) ................30
•
Combining pictures into a single
picture with rich gradation ([iHDR])
..... 30
• Taking a picture with a blurred
background (Defocus Control).......30
Taking Pictures with Your Favorite
Settings (Program AE Mode).............31
Taking Pictures by Specifying the
Aperture/Shutter Speed .....................32
• Aperture-Priority AE Mode.............32
• Shutter-Priority AE Mode ...............32
• Manual Exposure Mode.................33
• Confirm the Effects of Aperture and
Shutter Speed (Preview Mode) .....33
Recording motion pictures with
manually set aperture value/shutter
speed (Creative Video Mode) ............34
• Recording motion pictures in 4K....34
Taking Pictures that match the
Scene being recorded
(Scene Guide Mode) ...........................35
Taking Pictures with different image
effects (Creative Control Mode) ........36
Registering your preferred settings
(Custom Mode) ...................................36
• Registering Personal Menu Settings
(Registering custom settings)........... 36
Adjusting the White Balance .............37
Setting the Picture Quality and Size .... 38
• Setting the aspect ratio of pictures ... 38
• Setting the number of pixels..........38
• Setting the compression rate of
pictures ([Quality]) .........................39
Taking Pictures with Auto Focus ......40
• About the focus mode
(AFS/AFF/AFC) .............................41
Taking Pictures with Manual Focus..... 41
Taking Close-up Pictures...................43
DMC-FZ1000_PPC_eng.book 8 ページ ２０１４年５月３０日 金曜日 午後５時９分
9
(ENG) SQT0196
Fixing the Focus and the Exposure
(AF/AE Lock) .......................................43
Compensating the Exposure.............44
Setting the Light Sensitivity ..............44
Selecting the Method for Measuring
Brightness ([Metering Mode])............45
Setting the Shutter Type ....................45
Select a Drive Mode............................46
Taking Pictures using Burst Mode....47
Taking Pictures using Auto Bracket..... 48
Taking Pictures with the Self-timer ...49
Taking Pictures Automatically at Set
Intervals ([Time Lapse Shot]) ............49
Creating Stop Motion Pictures
([Stop Motion Animation])..................51
Functions Customized for Various
Subjects and Purposes......................52
• Disabling Operational Sounds and
the Output of Light at once
([Silent Mode]) ...............................52
• Displaying the center of the screen
([Center Marker]) ...........................52
• Checking areas that may be white
saturated ([Zebra Pattern]) ............53
Optical Image Stabilizer .....................53
Taking Pictures with the Zoom..........54
Taking pictures by using the flash....55
• Changing Flash Mode....................55
Using the Wi-Fi function
Wi-Fi
R
function/NFC function ........... 56
Controlling with a Smartphone/Tablet
.... 57
• Installing the smartphone/tablet
app “Image App”........................... 57
•
Connecting to a smartphone/tablet
..... 57
• Taking pictures via a smartphone/
tablet (remote recording)............... 61
• Playing back images in the
camera.......................................... 61
• Saving images stored in the
camera.......................................... 61
• Sending images in the camera to an
SNS............................................... 62
Setting up a connection to a PC via
a wireless access point ..................... 63
Others
Playing Back Pictures on a
TV Screen ........................................... 65
Saving still pictures and motion
pictures on your PC........................... 66
• About the supplied software.......... 66
Monitor Display/Viewfinder Display
.... 69
Message Display ................................ 72
Menu list ............................................. 73
• [Rec].............................................. 73
• [Motion Picture] ............................. 75
• [Custom]........................................ 76
• [Setup]........................................... 78
• [Playback]...................................... 79
Troubleshooting................................. 80
Specifications..................................... 84
Digital Camera Accessory System ... 87
Reading the Owner’s Manual
(PDF format) ....................................... 88
Digital Camera Accessory Order Form
(For USA Customers) ........................ 89
Limited Warranty (ONLY FOR U.S.A.)
... 90
Limited Warranty (ONLY FOR CANADA)
.... 93
DMC-FZ1000_PPC_eng.book 9 ページ ２０１４年５月３０日 金曜日 午後５時９分
10
Before Use
SQT0196 (ENG)
Care of the camera
Do not subject to strong vibration, shock, or pressure.
•
The lens, monitor, or external case may be damaged if used in the
following conditions.
It may also malfunction or image may not be recorded if you:
– Drop or hit the camera.
– Press hard on the lens or the monitor.
• When camera is not in use or when using the playback feature,
ensure that the lens is in the stored position, with lens cap on.
• There are times when rattling sounds or vibrations will come from
the camera, but these are due to the motion of the aperture, the
zoom and the motor and do not indicate a defect.
This camera is not dust/splash/water proof.
Avoid using the camera in places with a lot of dust, water, sand,
etc.
•
Liquid, sand and other foreign material may get into the space around
the lens, buttons, etc. Be particularly careful since it may not just cause
malfunctions, but it may also become irreparable.
– Places with a lot of sand or dust.
– Places where water can come into contact with this unit, such as when using it on a rainy day
or at the beach.
∫ About Condensation (When the lens, the viewfinder or
monitor is fogged up)
•
Condensation occurs when the ambient temperature or humidity
changes. Be careful of condensation since it causes lens,
viewfinder and monitor stains, fungus and camera malfunction.
• If condensation occurs, turn the camera off and leave it for about
2 hours. The fog will disappear naturally when the temperature of
the camera becomes close to the ambient temperature.
DMC-FZ1000_PPC_eng.book 10 ページ ２０１４年５月３０日 金曜日 午後５時９分
11
Before Use
(ENG) SQT0196
Standard Accessories
Check that all the accessories are supplied before using the camera.
Product numbers correct as of June 2014. These may be subject to change.
1 Battery Pack
(Indicated as battery pack or battery in the text)
Charge the battery before use.
2 Battery Charger
(Indicated as
battery charger
or
charger
in the text)
3 Lens Hood
4 Lens Cap
5 USB Connection Cable
6DVD
•
Software:
Use it to install the software to your PC.
• Owner’s Manual for advanced features:
Use it to install to your PC.
7 Shoulder Strap
8 Hot shoe cover
•
This is attached to the camera at the time of
purchase.
• SD Memory Card, SDHC Memory Card and SDXC
Memory Card are indicated as card in the text.
• The card is optional.
(For U.S.A. only)
•
If accessories are lost, customers can visit us at
www.panasonic.com/support
for further information
about obtaining replacement parts.
(For Canada only)
•
If any accessories are lost, customers in Canada
should visit our support page at www.panasonic.ca/
english/support for further information about obtaining
replacement parts.
12
K1HY08YY0031
4
65
8
VFC4453
SFM0022
VYF3522
SYQ0103
7
3
DMW-BLC12PP
DE-A79B
SYQ0081
DMC-FZ1000_PPC_eng.book 11 ページ ２０１４年５月３０日 金曜日 午後５時９分
12
Before Use
SQT0196 (ENG)
Names and Functions of Components
2322
6
7
8
9
10
11
12 13 14
21 24 25
16
17
18
19
20
26
5
15
123 4
1 Mode dial (P21)
2 Camera ON/OFF switch (P18)
3 Status indicator (P18)
4 Wi-Fi
®
connection lamp (P56)
5
Focal length scale (35 mm film camera
equivalent)
• Indicates values for the [3:2] aspect
ratio. (When recording motion pictures,
refer to the focal length displayed on
the screen.)
6 [Wi-Fi] button (P56)/[Fn2] button
7 [Fn1] button
8 Motion picture button (P22)
9 Shutter button (P22)
10 Zoom lever (P54)
11
Self-timer indicator (P49)/
AF Assist Lamp
12 Flash (P55)
13
Stereo microphone
• Be careful not to cover the microphone
with your finger. Doing so may make
sound difficult to record.
14
Hot shoe (Hot shoe cover)
• Keep the Hot Shoe Cover out of reach
of children to prevent swallowing.
15
Drive mode dial
Single (P46):
Burst (P47):
Auto Bracket (P48):
Self-timer (P49):
Time Lapse/Animation (P49, 51):
16
Flash open lever (P55)
• The flash opens, and recording with the
flash becomes possible.
17 Eye Cup
18 Viewfinder (P16)
19 Eye sensor (P16)
20 Diopter adjustment dial (P16)
21 Lens surface
22 Manual ring (P41, 54)
23 O.I.S switch (P53)
24 Manual ring selector switch (P41, 54)
25 [MIC] socket
26 Shoulder strap eyelet (P15)
DMC-FZ1000_PPC_eng.book 12 ページ ２０１４年５月３０日 金曜日 午後５時９分
13
Before Use
(ENG) SQT0196
29
42
43
32
28
27
33
44
30
31
45
46
47
40
41
39
36
35
37
38
34
27 [LVF] button (P16)/[Fn5] button
28
Speaker
• Be careful not to cover the speaker with
your finger. Doing so may make sound
difficult to hear.
29 Monitor (P15)
30 NFC antenna [ ] (P59)
31
Tripod mount
• A tripod with a screw length of 5.5 mm
(0.22 inch) or more may damage this
unit if attached.
32
Rear dial
• This Owner’s Manual describes
operations of the rear dial as follows:
33
[DISP.] button (P24)
• Each time this is pressed, the display
on the monitor is switched.
34 Terminal cover
35 [AF/AE LOCK] button (P43)
36 Focus mode lever (P40, 41)
37
[Q.MENU] button (P20)/[Fn3] button
38 [(] (Playback) button (P25)
39 [REMOTE] socket
40 [HDMI] socket (P65)
41 [AV OUT/DIGITAL] socket (P65, 68)
42
Cursor buttons
• This Owner’s Manual expresses the
up, down, left, and right of the cursor
button as 3/4/2/1.
3/ISO button (P44)
1/WB (White Balance) (P37)
2/AF Mode button (P40)
4/AF # button (P43)
43 [MENU/SET] button (P19)
44
[ ] (Delete/Cancel) button (P27)/
[Fn4] button
45
DC coupler cover
• When using an AC adaptor, ensure that
the Panasonic DC coupler (DMW-
DCC8: optional) and AC adaptor
(DMW-AC10PP: optional) are used.
• Always use a genuine Panasonic AC
adaptor (DMW-AC10PP: optional).
• It is recommended to use a fully
charged battery or AC adaptor when
recording motion pictures.
• If while recording motion pictures using
the AC adaptor and the power supply is
cut off due to a power outage or if the
AC adaptor is disconnected etc., the
motion picture will not be recorded.
46 Release lever (P17)
47 Card/Battery door (P17)
DMC-FZ1000_PPC_eng.book 13 ページ ２０１４年５月３０日 金曜日 午後５時９分
14
Before Use
SQT0196 (ENG)
Preparations before Recording
• Do not hold the lens hood in a way that twists or bends it.
• Check that the camera is turned off.
• Close the flash.
1 Align the mounting mark under the long side of the lens hood with the
mounting projection on the edge of the lens.
2 Screw in the lens hood in the direction of the arrow.
3 You will feel some stiffness just before the mark, but continue to rotate the lens
hood until you hear a “click” and align the mark.
•
Check that the lens hood is firmly attached and that it does not appear in the picture.
• When temporarily detaching and carrying the lens hood, we recommend
attaching with the orientation reversed.
Return it to the normal direction when taking pictures.
• When taking pictures with flash with the lens hood attached, the lower
portion of the photo may turn dark (vignetting effect) and the control of
the flash may be disabled because the photo flash may be obscured by
the lens hood. We recommend detaching the lens hood.
•
When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the lens.
• Make sure to detach the lens cap when turning this unit on.
• Be careful not to lose the lens cap.
Attaching the Lens Hood
Attaching the Lens Cap
SQT0196~Body1_eng.fm 14 ページ ２０１４年６月１１日 水曜日 午後３時３４分
15
Before Use
(ENG) SQT0196
• We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
1 Pass the shoulder strap
through the hole at the
shoulder strap eyelet.
2 Pass the shoulder strap
through the stopper and
fasten the shoulder strap.
A Pull the shoulder strap 2 cm
(0.066 feet) or more.
• Attach the shoulder strap to the other side of the camera being careful not to twist it.
At the time when this camera is purchased, the monitor is stowed in the camera body.
Bring out the monitor as shown below.
1 Place your finger in the notch on the right side of the monitor to open it.
(Maximum 180o)
2 It can be rotated 180o forwards.
3 Return the monitor to its original position.
•
Only rotate the monitor after opening it wide enough, and be careful not to use
excessive force as it may be damaged.
• When not using the monitor it is recommended that you close it with the screen facing inward to
prevent dirt and scratches.
∫ Free angle shooting
The monitor can be rotated to suit your needs. This is convenient as it allows you to take
pictures from various angles by adjusting the monitor.
Attaching the Shoulder Strap
Monitor
Taking pictures at a high angle Taking pictures at a low angle
DMC-FZ1000_PPC_eng.book 15 ページ ２０１４年５月３０日 金曜日 午後５時９分
16
Before Use
SQT0196 (ENG)
Press [LVF] to switch between the Monitor and Viewfinder.
•
The monitor/viewfinder will switch as follows:
¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated.
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see the
viewfinder clearly.
Look at the display on the viewfinder and rotate the diopter
adjustment dial to where the screen is in focus.
A Diopter adjustment dial
1 Attach the battery paying
attention to the direction of
the battery.
2 Connect the charger to the
electrical outlet.
•
The [CHARGE] indicator A
lights up and charging
begins.
∫ About the [CHARGE] indicator
•
When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF).
[LVF] button (Switching the Monitor/Viewfinder)
Automatic viewfinder/
monitor switching
¢
Viewfinder display
¢
Monitor display
Charging the Battery
On: Charging.
Off: Charging has completed.
(Disconnect the charger from the electrical socket and detach the
battery after charging is completed.)
90°
DMC-FZ1000_PPC_eng.book 16 ページ ２０１４年５月３０日 金曜日 午後５時９分
17
Before Use
(ENG) SQT0196
∫ Charging time
•
The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not been
used for a long time may be longer than normal.
∫ Battery indication
•
The indication turns red and blinks if the remaining battery power is exhausted.
(The status indicator also blinks)
Recharge the battery or replace it with a fully charged battery.
• Always use genuine Panasonic batteries (DMW-BLC12PP).
• If you use other batteries, we cannot guarantee the quality of this product.
• Battery: Being careful about the battery orientation, insert all the way until you hear a locking
sound and then check that it is locked by lever A.
Pull the lever A in the direction of the arrow to remove the battery.
• Card: Push it securely all the way until you hear a “click” while being careful about the direction
in which you insert it.
To remove the card, push the card until it clicks, then pull the card out upright.
B:Do not touch the connection terminals of the card.
∫ About cards that can be used with this unit
The following cards which conform to the SD standard can be used with this unit.
(These cards are indicated as card in the text.)
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
• Keep the Memory Card out of reach of children to prevent swallowing.
Charging time Approx. 140 min
Inserting and Removing the Card (optional)/the Battery
DMC-FZ1000_PPC_eng.book 17 ページ ２０１４年５月３０日 金曜日 午後５時９分
18
Before Use
SQT0196 (ENG)
∫ About the motion picture recording and speed class
According to the [Rec Format] and [Rec Quality] of a motion picture, the required card differs.
Use a card that meets the following ratings of the SD Speed Class or UHS Speed Class.
• SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing.
To check the class, see the labelled side, etc. of the card.
• Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Format the card before recording a picture with this unit.
Since data cannot be recovered after formatting, make sure to back up necessary
data in advance.
Select the menu.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
• The clock is not set when the camera is shipped.
1 Turn the camera on.
•
The status indicator
1
lights when you turn this unit on.
2 Press [MENU/SET].
3
Press
2
/
1
to select the items (year, month, day, hour,
minute), and press
3
/
4
to set.
To set the display order and the time display format.
•
To display the setting screen of the order/time, select
[Style] and then press [MENU/SET].
4 Press [MENU/SET].
5 Press 2/1 to select the home area, and then press
[MENU/SET].
[Rec Format] [Rec Quality] Speed class Label example
[AVCHD] All
Class 4 or higher
[MP4] FHD/HD/VGA
[MP4] 4K UHS Speed Class 3
Formatting the card (initialization)
> [Setup] > [Format]
Setting Date/Time (Clock Set)
MENU
ON
OFF
DMC-FZ1000_PPC_eng.book 18 ページ ２０１４年５月３０日 金曜日 午後５時９分
19
Basic Operation
(ENG) SQT0196
Setting the Menu
Example: In the [Rec] menu, change [Quality] from [A] to [›]
1
Press [MENU/SET].
2
Press 3/4 to select the menu item and then press [MENU/SET].
3
Press 3/4 to select the setting and then
press [MENU/SET].
• Depending on the menu item, its setting may not appear
or it may be displayed in a different way.
∫ Close the menu
Press [ ] repeatedly until the screen returns to the recording/playback screen.
•
In Recording Mode, the menu screen can also be exited by pressing the shutter button halfway.
[Rec] (P73)
This menu lets you set the aspect ratio, number of pixels
and other aspects of the pictures you are recording.
[Motion Picture]
(P75)
This menu lets you set the [Rec Format], [Rec Quality], and
other aspects for motion picture recording.
[Custom] (P76)
Operation of the unit, such as displaying of the screen and
button operations, can be set up according to your
preferences. Also, it is possible to register the modified
settings.
[Setup] (P78)
This menu lets you perform the clock settings, select the
operating beep tone settings and set other settings which
make it easier for you to operate the camera.
You can also configure the settings of Wi-Fi related
functions.
[Playback] (P79)
This menu lets you set the Protection, Cropping or Print
Settings, etc. of recorded pictures.
DMC-FZ1000_PPC_eng.book 19 ページ ２０１４年５月３０日 金曜日 午後５時９分
20
Basic Operation
SQT0196 (ENG)
∫ Switching to other menus
e.g.: Switching to the [Setup] menu from [Rec] menu.
1 Press 2.
2 Press 3/4 to select [ ] or another of the menu
toggle icons.
3 Press [MENU/SET].
•
Select a menu item next and set it.
By using the Quick Menu, some of the menu settings can be easily found.
•
The features that can be adjusted using Quick Menu are determined by the mode or a display
style the camera is in.
1 Press [Q.MENU] to display the Quick Menu.
2 Rotate the rear dial to select the menu item, then
press the rear dial.
3 Rotate the rear dial to select the setting.
4 Press [Q.MENU] to exit the menu once the setting is
complete.
Tips for taking good pictures
Hold the camera gently with both hands,
keep your arms still at your side and stand
with your feet slightly apart.
• Do not cover the flash, the AF Assist lamp, the
microphone or the speaker with your fingers or
other objects.
• Be careful not to move the camera when you press
the shutter button.
• Do not hold the lens barrel as you take pictures.
There is a risk that your finger will be trapped as the
lens retracts.
Calling frequently-used menus instantly (Quick Menu)
ヲハヮユワヶ
ョㄏピ
AFS
AFS
AU
TO
602.8
0
AWB
L
3:2
60
i
DMC-FZ1000_PPC_eng.book 20 ページ ２０１４年５月３０日 金曜日 午後５時９分
21
Basic Operation
(ENG) SQT0196
Selecting the Recording Mode
Switching the mode by rotating the mode dial.
• Rotate the mode dial slowly to select the desired mode.
Intelligent Auto Mode (P28)
The subjects are recorded using settings automatically selected by the camera.
Intelligent Auto Plus Mode (P28)
Allows you to adjust the brightness and color hue when in Intelligent Auto Mode.
Program AE Mode (P31)
Records at the aperture value and shutter speed set by the camera.
Aperture-Priority AE Mode (P32)
The shutter speed is automatically determined by the aperture value you set.
Shutter-Priority AE Mode (P32)
The aperture value is automatically determined by the shutter speed you set.
Manual Exposure Mode (P33)
The exposure is adjusted by the aperture value and the shutter speed which are
manually adjusted.
Creative Video Mode (P34)
Records a motion picture with the aperture value and the shutter speed you specify. In this
recording mode, all the motion picture functions become available. For example, you can
record motion pictures in 4K.
¢ You cannot take still pictures.
Custom Mode (P36)
Use this mode to take pictures with previously registered settings.
Scene Guide Mode (P35)
This mode allows you to take pictures that match the scene being recorded.
Creative Control Mode (P36)
Record while checking the image effect.
DMC-FZ1000_PPC_eng.book 21 ページ ２０１４年５月３０日 金曜日 午後５時９分
22
Basic Operation
SQT0196 (ENG)
Taking a Still picture
• Set the drive mode dial to [ ] (single recording).
1
Select the Recording Mode. (P21)
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
3
Press the shutter button fully (push it in further), and take the
picture.
Recording Motion Picture
This camera can record full high definition motion pictures compatible with the AVCHD format
or motion pictures recorded in MP4.
• You can operate the zoom even when recording motion pictures.
• If the Extended Optical Zoom is used before pressing the motion picture button, those settings will
be cleared, so the shooting range will change dramatically.
• Still picture recording is also possible during the motion picture recording by fully pressing the
shutter button.
1
Start recording by pressing the motion picture
button.
• Release the motion picture button right after you press it.
• The operational sound of the zoom or button operation may
be recorded when it is operated during the recording of a
motion picture.
2
Stop the recording by pressing the motion
picture button again.
A Elapsed recording time
B Available recording time
Focus
When the subject is
focused
When the subject is not
focused
Focus indication On Blinks
AF area Green —
Sound Beeps 2 times Beeps 4 times
60
60
602.8
2.8
2.8
BA
3
s
3
s
3
s
R
1
m
3737
sR
1
m
37
s
A
B
DMC-FZ1000_PPC_eng.book 22 ページ ２０１４年５月３０日 金曜日 午後５時９分
23
Basic Operation
(ENG) SQT0196
∫ Setting the format, size and frame rate
1 Select the menu.
2 Press 3/4 to select the item and then press [MENU/SET].
3 Press 3/4 to select [Rec Quality] and then press [MENU/SET].
4 Press 3/4 to select the item and then press [MENU/SET].
•
Exit the menu after it is set.
When [AVCHD] is selected
¢1 AVCHD Progressive
¢2 The sensor output is 30 frames/second
When [MP4] is selected
¢3 These can be set only in Creative Video Mode.
> [Motion Picture] > [Rec Format]
[AVCHD]
This data format is suitable for when playing back on a high-definition TV,
etc.
[MP4] This data format is suitable for when playing back on a PC, etc.
Item Size Frame rate Bit rate
[FHD/28M/60p]
¢1
1920k1080 60p 28 Mbps
[FHD/17M/60i] 1920k1080 60i 17 Mbps
[FHD/24M/30p] 1920k1080 60i
¢2
24 Mbps
[FHD/24M/24p] 1920k1080 24p 24 Mbps
Item Size Frame rate Bit rate
[4K/100M/30p]
¢3
3840k2160 30p 100Mbps
[FHD/28M/60p] 1920k1080 60p 28 Mbps
[FHD/20M/30p] 1920k1080
30p
20 Mbps
[HD/10M/30p] 1280k720 10 Mbps
[VGA/4M/30p] 640k480 4 Mbps
MENU
DMC-FZ1000_PPC_eng.book 23 ページ ２０１４年５月３０日 金曜日 午後５時９分
24
Basic Operation
SQT0196 (ENG)
Switching the Information Displayed on the
recording screen
Press [DISP.] to change.
• You can select between [ ] (monitor style) and [ ]
(viewfinder style) for each of the monitor and the viewfinder
display screen using [Monitor Disp. Style] and [LVF Disp.Style] in
the [Custom] menu.
([ ] monitor style)
•
Screen will switch as follows (Example of monitor display):
([ ] viewfinder style)
•
Screen will switch as follows (Example of display on viewfinder):
¢ It is displayed when the [Monitor Info. Disp.] of the [Custom] menu is set to [ON].
ABCD
FE
A With information
B Without information
C With information (tilt sensor display)
D Without information (tilt sensor display)
E On-monitor recording information
¢
F Turned off
GHIJ
G With information (detailed information)
H With information
I With information (detailed information, tilt
sensor display)
J With information (tilt sensor display)
ュリヴヱハ
98
98
98
AFS
AFS
60
i
L
3:2
0
98
98
98
AFS
AFS
60
i
L
3:2
0
AFS
AFS
98
AWB
0 0
0
Fn
ISO
AUTO
Wi-Fi
L
3:2
AFSAFS
6060
i
L
3:23:2
AFSAFS
60
i
L
3:2
98
0
98
0
98
0
98
0
AFSAFS
6060
i
L
3:23:2
AFSAFS
60
i
L
3:2
DMC-FZ1000_PPC_eng.book 24 ページ ２０１４年５月３０日 金曜日 午後５時９分
25
Basic Operation
(ENG) SQT0196
Playing Back Pictures/Motion Pictures
1
Press [(].
2
Press 2/1.
∫ To finish playback
Press [
(] again, press the motion picture button or press the shutter button
halfway.
Rotate the zoom lever towards [Z] (T).
1k 2k 4k 8k 16k
•
When you change the magnification, the zoom position
indication A appears for about 1 second.
• The more a picture is enlarged, the more its quality deteriorates.
• You can move the enlarged part by pressing 3/4/2/1 of the
cursor button.
Rotate the zoom lever towards [L] (W).
1 screen 12 screens 30 screens Calendar screen
display
∫ To return to Normal Playback
Press 3/4/2/1 to select a picture and then press
[MENU/SET].
Playing Back Pictures
2: Play back the previous picture
1: Play back the next picture
Using the Playback Zoom
Displaying multiple screens (Multi Playback)
2.0X2.0X2.0X2.0X
A
1/98
DMC-FZ1000_PPC_eng.book 25 ページ ２０１４年５月３０日 金曜日 午後５時９分
26
Basic Operation
SQT0196 (ENG)
1 Rotate the zoom lever towards [L] (W) to display
the calendar screen.
2 Press 3/4/2/1 to select the date to be played back.
3 Press [MENU/SET] to display the images that are
recorded in selected date.
4 Press 3/4/2/1 to select a picture and then press
[MENU/SET].
This unit was designed to play motion pictures using the AVCHD and MP4 formats.
In Playback Mode, select a picture with the motion
picture icon ([ ]), and then press 3 to play back.
A Motion picture recording time
• After playback starts, the elapsed playback time is displayed on
the screen.
For example, 8 minutes and 30 seconds is displayed as
[8m30s].
• Some information (recording information, etc.) is not displayed
for motion pictures recorded in [AVCHD].
∫ Operations during Motion Picture Playback
¢ The fast forward/rewind speed increases if you press 1/2 again.
• To play back the motion pictures recorded by this unit on a PC, use the “PHOTOfunSTUDIO”
software on the DVD (supplied).
Displaying Pictures by Recording Date (Calendar Playback)
Playing Back Motion Pictures
3 Play/Pause 4 Stop
2
Fast rewind
¢
1
Fast forward
¢
Frame-by-frame rewind
(while pausing)
Frame-by-frame forward
(while pausing)
Rear dial
(left)
Reduce volume level
Rear dial
(right)
Increase volume level
2014
SUN MON TUE WED THU FRI SAT
１０ 1１
19 20
24
31
25 26 27
９
16
23
30
12
17
15
22
29
８
13
18
14
21
28
７
３４２５1 ６
12
12s12s12s12s
A
DMC-FZ1000_PPC_eng.book 26 ページ ２０１４年５月３０日 金曜日 午後５時９分
27
Basic Operation
(ENG) SQT0196
Deleting Pictures
Once deleted, pictures cannot be recovered.
•
Pictures that are not in the DCF standard or those that are protected cannot be deleted.
1 In Playback Mode, select the picture to delete and
then press [ ].
2 Press 3 to select [Delete Single] and then press
[MENU/SET].
•
Confirmation screen is displayed.
Picture is deleted by selecting [Yes].
¢ Picture groups are treated as a single picture.
(All the pictures in the selected picture group will be deleted.)
1 In Playback Mode, press [ ].
2 Press 3/4 to select [Delete Multi] or [Delete All] and then press [MENU/SET].
•
[Delete All] > Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
• It is possible to delete all pictures except the ones set as favorite when [All Delete Except
Favorite] is selected with the [Delete All] set.
3 (When [Delete Multi] is selected)
Press 3/4/2/1 to select the picture, and then press
[MENU/SET] to set. (Repeat this step.)
•
[‚] appears on the selected pictures.
If [MENU/SET] is pressed again, the setting is canceled.
4 (When [Delete Multi] is selected)
Press 2 to select [OK], and then press [MENU/SET].
•
Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
• Depending on the number of pictures to be deleted, it may take some time to delete them.
To delete a single picture
To delete multiple pictures (up to 100
¢
) or all the pictures
ョㄏフ
'HOHWH6LQJOH
'HOHWH0XOWL
'HOHWH$OO
2.
DMC-FZ1000_PPC_eng.book 27 ページ ２０１４年５月３０日 金曜日 午後５時９分
28
Recording Modes
SQT0196 (ENG)
Taking Pictures using the Automatic Function
(Intelligent Auto Mode)
Recording Mode:
When you wish to leave settings to the camera and record without thinking about them,
use Intelligent Auto Plus Mode or Intelligent Auto Mode, which makes optimal settings for
the subject and scene.
•
Functions that can be set differ between Intelligent Auto Plus Mode and Intelligent Auto Mode.
(±: possible, —: not possible)
1
Set the mode dial to [¦].
• The camera will switch to either the most recently used of Intelligent Auto Mode or
Intelligent Auto Plus Mode.
At the time of purchase, the mode is set to Intelligent Auto Plus Mode.
2
Align the screen with the subject.
• When the camera identifies the optimum scene, the icon
of the scene concerned is displayed in blue for 2 seconds,
after which its color changes to the usual red.
• If you press 2 and then press the shutter button halfway,
the AF tracking function will be activated.
∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode
1 Press [MENU/SET].
•
Press 2, and press 3/4 to select [ ] or [ ].
2 Press 2/1 to select [ ] or [ ] and then press
[MENU/SET].
•
Press [DISP.] to display the description of the selected
mode.
Intelligent Auto Plus Mode Intelligent Auto Mode
Setting the brightness ± —
Setting the color tone ± —
Defocus Control
(P30) ±±
60
i
3
DMC-FZ1000_PPC_eng.book 28 ページ ２０１４年５月３０日 金曜日 午後５時９分
29
Recording Modes
(ENG) SQT0196
∫ Scene Detection
When taking pictures
¢1 Only displayed when the built-in flash is open.
¢2 Only displayed when [iHandheld Night Shot] is set to [ON].
¢3 When [Face Recog.] is set to [ON], [ ] will be displayed for birthdays of registered faces
already set only when the Face/Eye of a person 3 years old or younger is detected.
When recording motion pictures
•
[¦] is set if none of the scenes are applicable, and the standard settings are set.
∫ About the flash
Flash mode is set to [Œ] when the flash is closed, and [ ] (AUTO) when it is open.
When the flash is open, the camera automatically sets [ ], [ ] (AUTO/Red-Eye
Reduction), [ ], or [ ] to match the type of subject and brightness.
•
Open the flash when the flash is to be used. (P55)
∫ Functions that work automatically
•
The following functions are performed automatically to allow the camera to make the optimal
settings.
– Scene Detection
– Backlight Compensation
– [Face/Eye Detection]
– Auto White Balance
– Intelligent ISO sensitivity control
– [Red-Eye Removal]
– [i.Resolution]
– [i.Dynamic]
– [Long Shtr NR]
– [Quick AF]
– [AF Assist Lamp]
– [Level Shot]
¦
>
[i-Portrait] [iHandheld Night Shot]
¢
2
[i-Scenery] [i-Food]
[i-Macro] [i-Baby]
¢3
[i-Night Portrait]
¢1
[i-Sunset]
[i-Night Scenery]
¦
>
[i-Portrait]
[i-Scenery]
[i-Low Light]
[i-Macro]
DMC-FZ1000_PPC_eng.book 29 ページ ２０１４年５月３０日 金曜日 午後５時９分
30
Recording Modes
SQT0196 (ENG)
Recording Mode:
When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld
night shots, pictures of the night scenery will be taken at a high burst speed and composed
into a single picture.
This mode is useful if you want to take stunning night shots with minimal jitter and noise,
without using a tripod.
•
Flash is fixed to [Œ] (forced flash off).
Recording Mode:
When [iHDR] is set to [ON] and there is, for example, strong contrast between the
background and the subject, multiple still pictures are recorded with differing exposures
and combined to create a single still picture rich in gradation.
[iHDR] works automatically as needed. When it does, [ ] is displayed on the screen.
Recording Mode:
You can easily set the blurriness of the background while checking the screen.
1 Press the rear dial to display the setting screen.
•
Each time the rear dial is pressed in Intelligent Auto Plus Mode, the camera switches
among brightness setting operation, Defocus Control operation, and normal operation.
• Each time the rear dial is pressed in Intelligent Auto Mode, the camera switches between
Defocus Control operation and normal operation.
2 Set the blurriness by rotating the rear dial.
•
Pressing [ ] on the blurriness setting screen will cancel the setting.
Recording night scenes ([iHandheld Night Shot])
[MENU] > [Rec] > [iHandheld Night Shot] > [ON]/[OFF]
Combining pictures into a single picture with rich gradation ([iHDR])
[MENU] > [Rec] > [iHDR] > [ON]/[OFF]
Taking a picture with a blurred background (Defocus Control)
Strong defocus Weak defocus
SS
SS
SS
F
F
250500
4.02.8 5.6 8.0
3060125
DMC-FZ1000_PPC_eng.book 30 ページ ２０１４年５月３０日 金曜日 午後５時９分
31
Recording Modes
(ENG) SQT0196
Taking Pictures with Your Favorite Settings
(Program AE Mode)
Recording Mode:
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec]
menu.
1
Set the mode dial to [ ].
2
Press the shutter button halfway and display
the aperture value and shutter speed value
on the screen.
• If the exposure is not adequate when the shutter button
is pressed halfway, the aperture value and shutter speed
turn red and blink.
3
While the values are displayed (about 10 seconds), perform the
Program Shift by rotating the rear dial.
• It will switch between Program Shift operation and Exposure Compensation operation
(P44) every time the rear dial is pressed while the values are displayed.
• The Program Shift indication A appears on the screen.
• To cancel Program Shift, turn the camera off or rotate the rear dial until the Program
Shift indication disappears.
Displaying/not displaying the exposure meter
> [Custom] > [Expo.Meter] > [ON]/[OFF]
•
When [Expo.Meter] is set to [ON], the exposure meter B will
be displayed when performing Program Shift, setting the
aperture value or adjusting the shutter speed.
• Unsuitable areas of the range are displayed in red.
• When the exposure meter is not displayed, switch the display
information for screen by pressing [DISP.]. (P24)
• The exposure meter disappears after approximately 4 seconds
if no operation is performed.
60
60
604.0
4.0
4.0
2
00
SS
SS
SS
F
F
0
98
98
98
250 15
4.0 5.6
3060125
2.8
8.0
A
MENU
6060604.04.04.0
2
00
SSSSSS
FF
0
989898
250 15
4.0 5.6
3060125
2.8
8.0
B
DMC-FZ1000_PPC_eng.book 31 ページ ２０１４年５月３０日 金曜日 午後５時９分
32
Recording Modes
SQT0196 (ENG)
Taking Pictures by Specifying the Aperture/
Shutter Speed
Recording Mode:
•
The effects of the set aperture value and shutter speed will not be visible on the recording
screen. To check on the recording screen, please use [Preview]. (P33)
• The brightness of the screen and the recorded pictures may differ. Check the pictures on the
playback screen.
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
1 Set the mode dial to [ ].
2 Rotate the rear dial to set the aperture value.
A Aperture value
B Exposure meter
• It will switch between aperture setting operation and
Exposure Compensation operation every time the rear dial
is pressed.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
1 Set the mode dial to [ ].
2 Rotate the rear dial to set the shutter speed.
A Shutter speed
B Exposure meter
• It will switch between shutter speed setting operation and
Exposure Compensation operation every time the rear dial
is pressed.
Available Aperture Value Available Shutter Speed (Sec)
F2.8 to F8.0
B (Bulb)
¢
, 60 to 1/4000th
(with the mechanical shutter)
1 to 1/16000th
(with the electronic shutter)
¢ It can only be used with Manual Exposure
Mode.
Aperture-Priority AE Mode
Shutter-Priority AE Mode
SSSS
FF
8.08.08.0
60 4
4.0 5.6 8.0
81530
BA
SSSSSS
F
250250250
60
5.6 4.0
250 500125
2.8
1
000
A B
DMC-FZ1000_PPC_eng.book 32 ページ ２０１４年５月３０日 金曜日 午後５時９分
33
Recording Modes
(ENG) SQT0196
Determine the exposure by manually setting the aperture value and the shutter speed.
The Manual Exposure Assistance appears on the lower portion of the screen to indicate
the exposure.
1 Set the mode dial to [ ].
2 Rotate the rear dial to set the aperture and shutter
speed.
•
It will switch between aperture setting operation and
shutter speed setting operation every time the rear dial is
pressed.
A Exposure meter
B Aperture value
C Shutter speed
D Manual Exposure Assistance
∫ About [B] (Bulb)
If you set the shutter speed to [B], the shutter stays open while the shutter button is
pressed fully (up to about 120 seconds).
The shutter closes if you release the shutter button.
Use this when you want to keep the shutter open for a long time to take pictures of
fireworks, a night scene etc.
•
It can only be used with Manual Exposure Mode.
Applicable modes:
•
Confirm the effects of aperture:
You can check the depth of field (effective focus range) before taking a picture by closing the
leaf shutter to the aperture value you set.
• Confirm the effects of shutter speed:
Movement can be confirmed by displaying the actual picture that will be taken with that shutter
speed. When the shutter speed is set for high speed, display in the shutter speed preview will
be displayed like a time-release film. It is used in cases such as stopping the movement of
running water.
1 Set a function button to [Preview].
•
The following step is an example in which [Preview] is assigned to [Fn4].
2 Switch to confirmation screen by pressing [Fn4].
•
Screen is switched every time [Fn4] is pressed.
Manual Exposure Mode
Confirm the Effects of Aperture and Shutter Speed (Preview Mode)
Normal recording screen Effects of Aperture Effects of Shutter Speed
SSSSSS
F
1258
5.64.02.8 8.0
603015
3030305.6
00
+3
DBAC
DMC-FZ1000_PPC_eng.book 33 ページ ２０１４年５月３０日 金曜日 午後５時９分
34
Recording Modes
SQT0196 (ENG)
Recording motion pictures with manually set
aperture value/shutter speed
(Creative Video Mode)
Recording Mode:
It is possible to manually change the aperture and shutter speed and record motion pictures.
1
Set the mode dial to [ ].
2
Select the menu.
3
Press 3/4 to select [P], [A], [S] or [M], and then press [MENU/SET].
• The operation for changing the aperture value or shutter speed is the same as the
operation for setting the mode dial to , , or .
4
Start recording.
• Press the motion picture button or the shutter button to start recording a motion picture.
(Still pictures cannot be taken.)
5
Stop recording.
• Press the motion picture button or the shutter button to stop recording a motion picture.
• Aperture value
– Set the aperture value to a higher number when you want a sharp focus background. Set the
aperture value to a lower number when you want a soft focus background.
• Shutter speed
– When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
– Manually setting a higher shutter speed may increase the noise on-screen due to the higher
sensitivity.
–
When subjects are recorded in an extremely bright place or under fluorescent/LED lighting, the
color tone or brightness of the image may change, or horizontal stripes may appear on the screen.
In that case, change the Recording Mode or manually adjust the shutter speed to 1/60 or 1/100.
You can create finely-detailed motion pictures in 4K by recording motion pictures with their
size set to [4K] in [Rec Quality].
•
You can record motion pictures in 4K only in Creative Video Mode.
•
The angle of view of motion pictures in 4K is narrower than those of motion pictures in other sizes.
• When recording motion pictures in 4K, use a card rated as UHS Speed Class 3. (P18)
To record motion pictures in 4K:
1 Set the mode dial to [ ].
2 Set [Rec Format] in the [Motion Picture] menu to [MP4].
3 Set [Rec Quality] in the [Motion Picture] menu to [4K/100M/30p].
> [Motion Picture] > [Exposure Mode]
Recording motion pictures in 4K
MENU
DMC-FZ1000_PPC_eng.book 34 ページ ２０１４年５月３０日 金曜日 午後５時９分
35
Recording Modes
(ENG) SQT0196
Taking Pictures that match the Scene being
recorded
(Scene Guide Mode)
Recording Mode:
If you select a scene to suit the subject and recording conditions with reference to the
example images, the camera will set optimal exposure, color, and focus, allowing you to
record in a manner appropriate to the scene.
1
Set the mode dial to [ ].
2
Press 2/1 to select the scene.
3
Press [MENU/SET] to set.
∫ Switching the scene selection screen display
Press [DISP.] to switch the monitor screen.
∫ [Panorama Shot]
1 Check the recording direction, and then press [MENU/SET].
•
A horizontal/vertical guide is displayed.
2 Press the shutter button halfway to focus.
3 Press the shutter button fully and move the camera in a small circle in the
direction of the arrow on the screen.
4 Press the shutter button once again to end the still picture recording.
•
Recording can also be ended by keeping the camera still while recording.
• Recording can also be ended by moving the camera to the end of the guide.
Changing the recording direction
1 Select the menu.
> [Rec] > [Panorama Settings] > [Direction]
2 Select the recording direction, and then press [MENU/SET].
Recording from left to right
A Recording direction and panning (Guide)
• Move the camera at a constant speed.
Pictures may not be able to be recorded properly if the camera is moved too fast or slow.
MENU
A
DMC-FZ1000_PPC_eng.book 35 ページ ２０１４年５月３０日 金曜日 午後５時９分
36
Recording Modes
SQT0196 (ENG)
Taking Pictures with different image effects
(Creative Control Mode)
Recording Mode:
This mode records with additional image effects.
You can set the effects to add by selecting example images and checking them on the
screen.
1
Set the mode dial to [ ].
2
Press 3/4 to select the image effects (filters).
• The image effect of the selected example image will be
applied in a preview display
A.
3
Press [MENU/SET] to set.
∫ Switching the image effect (filter) selection screen display
Press [DISP.] to switch the monitor screen.
Registering your preferred settings (Custom Mode)
Recording Mode:
You can register the current camera settings as custom settings.
If you then record in Custom Mode, you can use the registered settings.
•
Initial setting of the Program AE Mode is registered as the custom settings initially.
To allow recording using the same settings, up to 4 sets of current camera settings can be
registered using [Cust.Set Mem.]. (
, , , )
1
Select the menu.
2
Press 3/4 to select the custom set to register and then press
[MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Registering Personal Menu Settings (Registering custom settings)
Preparations: Set in advance the Recording Mode you wish to save and select the
desired menu settings on the camera.
> [Custom] > [Cust.Set Mem.]
A
MENU
DMC-FZ1000_PPC_eng.book 36 ページ ２０１４年５月３０日 金曜日 午後５時９分
37
Recording Modes
(ENG) SQT0196
Adjusting the White Balance
Applicable modes:
In sunlight, under incandescent lights or in other such conditions where the color of white
takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to
what is seen by the eye in accordance with the light source.
1
Press 1 ( ).
2
Select the White Balance by rotating the rear dial.
3
Press the rear dial to set.
Set the White Balance value. Use to match the condition when taking photographs.
1 Press 1 ( ).
2 Rotate the rear dial to select [ ], [ ], [ ], or [ ], and then press 3.
3 Aim the camera at a sheet of white paper etc. so that
the frame in the center is filled by the white object
only and then press [MENU/SET].
[AWB] Automatic adjustment
[V] When taking pictures outdoors under a clear sky
[Ð] When taking pictures outdoors under a cloudy sky
[î] When taking pictures outdoors in the shade
[Ñ] When taking pictures under incandescent lights
[]
¢
When taking pictures with the flash only
¢ It will operate as [AWB] during motion picture recording.
[]/[]/[]/[]The manually set value is used
[] When using the preset color temperature setting
Setting the White Balance manually
1
2
3
4
1
2 3 4
DMC-FZ1000_PPC_eng.book 37 ページ ２０１４年５月３０日 金曜日 午後５時９分
38
Recording Modes
SQT0196 (ENG)
Setting the Picture Quality and Size
Applicable modes:
Applicable modes:
Setting the aspect ratio of pictures
> [Rec] > [Aspect Ratio]
[4:3] [Aspect Ratio] of a 4:3 TV
[3:2] [Aspect Ratio] of a 35 mm film camera
[16:9] [Aspect Ratio] of a high-definition TV, etc.
[1:1] Square aspect ratio
Setting the number of pixels
> [Rec] > [Picture Size]
When the aspect ratio is [4:3]. When the aspect ratio is [3:2].
Settings Image size Settings Image size
[L] (17.5M) 4864k3648 [L] (20M) 5472k3648
[M] (9M) 3456k2592 [M] (10M) 3888k2592
[S] (4.5M) 2432k1824 [S] (5M) 2736k1824
When the aspect ratio is [16:9]. When the aspect ratio is [1:1].
Settings Image size Settings Image size
[L] (17M) 5472k3080 [L] (13.5M) 3648k3648
[M] (8M) 3840k2160 [M] (6.5M) 2592k2592
[S] (2M) 1920k1080 [S] (3.5M) 1824k1824
MENU
MENU
DMC-FZ1000_PPC_eng.book 38 ページ ２０１４年５月３０日 金曜日 午後５時９分
39
Recording Modes
(ENG) SQT0196
Applicable modes:
Set the compression rate at which the pictures are to be stored.
¢1 If you delete a RAW file from the camera, the corresponding JPEG image will also be
deleted.
¢2 It is fixed to maximum recordable pixels ([L]) for each image aspect ratio.
Setting the compression rate of pictures ([Quality])
> [Rec] > [Quality]
[A] A JPEG image in which image quality was given priority.
[›]
A standard image quality JPEG image.
This is useful for increasing the number of shots without changing the number
of pixels.
[]
You can record a RAW image and a JPEG image ([A] or [›])
simultaneously.
¢1
[]
[]
You can only record RAW images.
¢2
About RAW
RAW format refers to a data format of images that have not been processed. Playback
and editing of RAW images require the camera or the dedicated software.
You can make advanced adjustments by editing RAW images. For example, you can
adjust the White Balance after taking pictures or save them in file formats that are
capable of displaying them on a PC. Pictures taken in RAW format will have higher
image quality than those taken in JPEG format, but the data size will be larger.
•
You can process RAW images in [RAW Processing] in the [Playback] menu.
• To process and edit RAW files on a PC, use the software “SILKYPIX Developer Studio” by
Ichikawa Soft Laboratory on the DVD (supplied).
MENU
DMC-FZ1000_PPC_eng.book 39 ページ ２０１４年５月３０日 金曜日 午後５時９分
40
Recording Modes
SQT0196 (ENG)
Taking Pictures with Auto Focus
Applicable modes:
This allows the focusing method that suits the positions and number of the subjects to be
selected.
1
Set the focus mode lever to [AFS/AFF] or
[AFC].
• The Focus Mode will be set. (P41)
2
Press 2 ().
3
Press 2/1 to select AF Mode and then press
[MENU/SET].
š
([Face/Eye
Detection])
The camera automatically detects the person’s face and eyes.
An eye closer to the camera will be in focus, while the exposure will
be optimized for the face. (When [Metering Mode] is set to [ ])
([Tracking])
Focus and exposure can be adjusted to a specified subject. Focus
and exposure will keep on following the subject even if it moves.
(Dynamic tracking)
([49-Area])
Up to 49 AF areas can be focused.
This is effective when a subject is not in the center of the screen.
([Custom Multi])
From among 49 AF areas, you can freely set the optimum shape of
the AF area for the subject.
Ø
([1-Area])
The camera focuses on the subject in the AF area on the center of
the screen.
([Pinpoint])
You can achieve a more precise focus on a point that is smaller
than [Ø].
AFC
AFS/
AFF
MF
DMC-FZ1000_PPC_eng.book 40 ページ ２０１４年５月３０日 金曜日 午後５時９分
41
Recording Modes
(ENG) SQT0196
Applicable modes:
¢ In [AFS/AFF] in the [Rec] menu or the [Motion Picture] menu, you can assign [AFS] or [AFF]
to [AFS/AFF] of the focus mode lever.
Taking Pictures with Manual Focus
Applicable modes:
1
Set the focus mode lever to [MF].
2
Set the manual ring selector switch to
[FOCUS].
About the focus mode (AFS/AFF/AFC)
Item
The movement of the
subject and the scene
(recommended)
Description of settings
AFS
¢
Subject is still
(Scenery, anniversary
photograph, etc.)
“AFS” is an abbreviation of “Auto Focus Single”.
Focus is set automatically when the shutter button is
pressed halfway. Focus will be fixed while it is pressed
halfway.
AFF
¢
Movement cannot be
predicted
(Children, pets, etc.)
“AFF” is an abbreviation of “Auto Focus Flexible”. In
this mode, focusing is performed automatically when
the shutter button is pressed halfway.
If the subject moves while the shutter button is pressed
halfway, the focus is corrected to match the movement
automatically.
AFC
Subject is moving
(Sport, trains, etc.)
“AFC” is an abbreviation of “Auto Focus Continuous”. In
this mode, while the shutter button is pressed halfway,
focusing is constantly performed to match the
movement of the subject. When the subject is moving,
the focusing is performed by predicting the subject
position at the time of recording. (Movement prediction)
AFC
AFS/
AFF
MF
DMC-FZ1000_PPC_eng.book 41 ページ ２０１４年５月３０日 金曜日 午後５時９分
42
Recording Modes
SQT0196 (ENG)
3
Press 2 ().
4
Press 3/4/2/1 to determine the area to be
enlarged, and press [MENU/SET].
• The assist screen is displayed, enlarging the area. (MF
Assist)
• If you press [DISP.], the area to be enlarged will be reset
to the center.
5
Operate the manual ring to set the focus.
Rotate to A side:
Focuses on nearby subject
Rotate to B side:
Focuses on faraway subject
A Indicator for ¶ (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
• The in-focus portions will be highlighted. (Peaking)
• You can check whether the point of focus is to the near
side or to the far side. (MF Guide)
∫ Displaying the MF Assist
•
It is displayed by rotating the manual ring.
• It can also be displayed by pressing 2 to display the setup screen for the enlarged area,
deciding the area to enlarge using the cursor button, and then pressing [MENU/SET].
∫ Changing the display of the MF Assist
Each time the rear dial is pressed, an enlarged display switches between a windowed
screen display and a full screen display.
•
If the rear dial is rotated, the display can be enlarged/reduced up to approximately 3 to 6 times
when the enlarged display is in a windowed display or up to approximately 3 to 10 times when
the enlarged display is in a full screen display.
∫ Closing the MF Assist
•
It will close when the shutter button is pressed halfway.
• You can also close MF Assist by pressing [MENU/SET].
• If you have displayed the MF Assist by rotating the manual ring, it will close approximately
10 seconds after you stop operating the camera.
A
B
DA C
B
DMC-FZ1000_PPC_eng.book 42 ページ ２０１４年５月３０日 金曜日 午後５時９分
43
Recording Modes
(ENG) SQT0196
Taking Close-up Pictures
Applicable modes:
1
Press 4 [AF#].
2
Press 2/1 to select the item and then press
[MENU/SET].
• If the lens becomes dirty with fingerprints or dust, the lens may not be able to focus on the
subject correctly.
Fixing the Focus and the Exposure (AF/AE Lock)
Applicable modes:
This is useful when you want to take a picture of a subject outside the AF area or the
contrast is too strong and you cannot achieve appropriate exposure.
1
Align the screen with the subject.
2
Press and hold [AF/AE LOCK] to fix the focus or exposure.
• If you release [AF/AE LOCK], AF/AE Lock is canceled.
• Only the exposure is locked in the default setting.
3
While pressing [AF/AE LOCK], move the camera as you compose the
picture and then press shutter button fully.
• When [AE LOCK] is set, after pressing the shutter button halfway to focus, press the
shutter button fully.
Setting the functions of [AF/AE LOCK]
[]([AF Macro])
You can take pictures of a subject as close as 3 cm
(0.098 feet) from the lens by rotating the zoom lever upmost
to Wide (1k).
[] ([Macro Zoom])
Use this setting to get close to the subject and then further
enlarge when taking the picture.
You can take a picture with the Digital Zoom up to 3k while
maintaining the distance to the subject for the extreme Wide
position [3 cm (0.098 feet)].
• The image quality is poorer than during normal recording.
• Zoom range will be displayed in blue. (digital zoom range)
[OFF] j
> [Custom] > [AF/AE Lock]
MENU
DMC-FZ1000_PPC_eng.book 43 ページ ２０１４年５月３０日 金曜日 午後５時９分
44
Recording Modes
SQT0196 (ENG)
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
1
Press the rear dial to switch to Exposure
Compensation operation.
2
Rotate the rear dial to compensate the exposure.
3
Press the rear dial to set.
Setting the Light Sensitivity
Applicable modes:
1
Press 3 ( ).
2
Select the ISO sensitivity by rotating the rear dial.
3
Press the rear dial to set.
Underexposed Properly exposed Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
AUTO
The ISO sensitivity is automatically adjusted
according to the brightness.
• Maximum [3200]
(Intelligent)
The camera detects movement of the subject and then
automatically sets the optimum ISO sensitivity and shutter
speed to suit the movement of the subject and brightness
of the scene to minimize the jitter of the subject.
• Maximum [3200]
80
¢
/100
¢
/125/200/400/800/
1600/3200/6400/12800/25600
¢
The ISO sensitivity is fixed to various settings.
¢ Only available when [Extended ISO] is set.
DMC-FZ1000_PPC_eng.book 44 ページ ２０１４年５月３０日 金曜日 午後５時９分
45
Recording Modes
(ENG) SQT0196
Selecting the Method for Measuring Brightness
([Metering Mode])
Applicable modes:
Type of optical measurement to measure brightness can be changed.
Setting the Shutter Type
Applicable modes:
You can use either of the two shutters to take pictures: the mechanical shutter or the
electronic shutter.
¢ The mechanical shutter sound cannot be muted.
> [Rec] > [Metering Mode]
[]
(Multiple)
This is the method in which the camera measures the most suitable
exposure by judging the allocation of brightness on the whole screen
automatically. Usually, we recommend using this method.
[]
(Center weighted)
This is the method used to focus on the subject on the center of the
screen and measure the whole screen evenly.
[]
(Spot)
This is the method to measure the subject in the spot
metering target A.
Mechanical Shutter Electronic Shutter
Description
The camera starts an exposure
electronically, and ends it with the
mechanical shutter.
The camera starts and ends an
exposure electronically.
Flash ± —
Shutter Speed
(Sec.)
60 to 1/4000th 1 to 1/16000th
Shutter sound
Mechanical shutter sound
¢
+
Electronic shutter sound
Electronic shutter sound
MENU
DMC-FZ1000_PPC_eng.book 45 ページ ２０１４年５月３０日 金曜日 午後５時９分
46
Recording Modes
SQT0196 (ENG)
Select the menu.
• When a moving subject is recorded with the electronic shutter, the subject may appear
distorted on the picture.
• When the electronic shutter is used under fluorescent or LED lighting, etc., horizontal
stripes may appear on the picture. In such cases, lowering the shutter speed may
reduce the effect of the horizontal stripes.
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
Rotating the drive mode dial.
[MENU] > [Rec] > [Shutter Type]
[AUTO]
Depending on the recording condition and the shutter speed, the
shutter type is switched automatically.
[MSHTR] Takes pictures only with the mechanical shutter.
[ESHTR] Takes pictures using only the electronic shutter method.
Single
When the shutter button is pressed, only one picture is
recorded.
Burst
Recordings are made in succession while the shutter button
is pressed.
Auto Bracket (P48)
Each time the shutter button is pressed, recordings are made
with different exposure settings according to the Exposure
Compensation range.
Self Timer (P49)
When the shutter button is pressed, recording takes place
after the set time has elapsed.
Time Lapse/Animation
(P49, 51)
Pictures are recorded with Time Lapse Shot or Stop Motion
Animation.
DMC-FZ1000_PPC_eng.book 46 ページ ２０１４年５月３０日 金曜日 午後５時９分
47
Recording Modes
(ENG) SQT0196
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
•
Pictures taken with a burst speed of [SH] will be recorded as a single burst group.
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst
Mode.
∫ Changing the burst speed
1 Select the menu.
2 Press 3/4 to select the burst speed and then press [MENU/SET].
> [Rec] > [Burst Rate]
[SH]
¢
2
(Super high
speed)
[H]
(High
speed)
[M]
(Middle
speed)
[L]
(Low speed)
Burst speed
(pictures/
second)
AFS 50 12 7 2
AFF/AFC — 7 7 2
Live View during Burst Mode None None Available Available
¢1
With RAW files —101010
Without RAW
files
Max. 60 Depends on the capacity of the card
¢1 Number of recordable pictures
¢2 The electronic shutter will operate.
AFSAFS
L
3:2
H
60
i
MENU
DMC-FZ1000_PPC_eng.book 47 ページ ２０１４年５月３０日 金曜日 午後５時９分
48
Recording Modes
SQT0196 (ENG)
Taking Pictures using Auto Bracket
Applicable modes:
Maximum of 7 pictures will be recorded with different exposure settings following the
Exposure Compensation range every time the shutter button is pressed.
With Auto Bracket
[Step]: [3•1/3], [Sequence]: [0/s/r]
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• If you press and hold the shutter button, the number of
pictures that you set is taken.
∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1 Select the menu.
2 Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
press [MENU/SET].
3 Press 3/4 to select the setting and then press [MENU/SET].
•
Exit the menu after it is set.
1st picture 2nd picture 3rd picture
d0EV j1/3 EV i1/3 EV
> [Rec] > [Auto Bracket]
AFS
AFS
L
3:2
60
i
MENU
DMC-FZ1000_PPC_eng.book 48 ページ ２０１４年５月３０日 金曜日 午後５時９分
49
Recording Modes
(ENG) SQT0196
Taking Pictures with the Self-timer
Applicable modes:
1
Set the drive mode dial to [ ].
2
Press the shutter button halfway to focus and then press it fully to
take the picture.
∫ Changing the time setting for the self-timer
1 Select the menu.
2 Press 3/4 to select the mode and then press [MENU/SET].
Taking Pictures Automatically at Set Intervals
([Time Lapse Shot])
Applicable modes:
If you set the start time of recording, the recording interval and the number of pictures, the
camera can automatically take pictures of subjects such as animals or plants as time
elapses and create a motion picture.
•
Set the date and time settings in advance. (P18)
• Pictures taken with Time Lapse Shot are displayed as a set of group pictures.
1
Set the drive mode dial to [ ].
2
Press [MENU/SET].
3
Press [MENU/SET].
4
Select [Mode] with 3/4, and then press [MENU/SET].
5
Select [Time Lapse Shot] with 3/4, and then press [MENU/SET].
> [Rec] > [Self Timer]
MENU
DMC-FZ1000_PPC_eng.book 49 ページ ２０１４年５月３０日 金曜日 午後５時９分
50
Recording Modes
SQT0196 (ENG)
6
Press 3/4 to select the item and then press [MENU/SET].
7
Press the shutter button halfway.
8
Press the shutter button fully.
• Confirmation screen for creating a motion picture is displayed next, so select [Yes].
9
Select the methods for creating a motion picture.
• The recording format is set to [MP4].
10
Select [OK] with 3/4, and then press [MENU/SET].
∫ Changing the Time Lapse Shot settings
You can change the settings in [Time Lapse/Animation] in the [Rec] menu.
[Start Time]
[Now] Starts the recording by fully-pressing the shutter button.
[Start Time
Set]
You can set the time to start recording.
Any time up to 23 hours 59 minutes ahead can be set.
Select the item (hour or minute) by pressing 2/1,
set the start time by pressing 3/4, and then press
[MENU/SET].
[Shooting
Interval]/
[Image
Count]
The recording interval and the number of pictures can be set.
2/1: Select the item (minute/second/number of pictures)
3/4: Setting
[MENU/SET]: Set
• A recording interval ranging from 1 second to 99 minutes and
59 seconds can be set at 1 second interval.
• The number of pictures ranging from 1 to 9999 can be set.
[Rec Quality]
Sets the quality of a motion picture.
[4K/30p]/[FHD/60p]/[FHD/30p]/[HD/30p]/[VGA/30p]
[Frame Rate]
Sets the number of frames per second.
The larger the number is, the smoother the motion picture will
be.
[60fps]
¢
/[30fps]/[15fps]/[10fps]/[7.5fps]/[6fps]/[3fps]/[1fps]
¢ Only when set to [FHD/60p]
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
DMC-FZ1000_PPC_eng.book 50 ページ ２０１４年５月３０日 金曜日 午後５時９分
51
Recording Modes
(ENG) SQT0196
Creating Stop Motion Pictures ([Stop Motion
Animation])
Applicable modes:
•
Set the date and time settings in advance. (P18)
• Pictures taken with [Stop Motion Animation] are displayed as a set of group pictures.
1
Set the drive mode dial to [ ].
2
Press [MENU/SET].
3
Press [MENU/SET].
4
Select [Mode] with 3/4, and then press [MENU/SET].
5
Select [Stop Motion Animation] with 3/4, and then press [MENU/
SET].
6
Press 3
/
4 to select the recording method, and then press [MENU/
SET].
7
Press the shutter button halfway.
8
Press the shutter button fully.
9
Move the subject to decide on the composition.
• Repeat recording in the same way.
10
To stop the recording, press [MENU/SET], select [Time Lapse/
Animation] in the [Rec] menu, and press [MENU/SET].
• Confirmation screen for creating a motion picture is displayed next, so select [Yes].
[Auto
Shooting]
[ON]
Takes pictures automatically at a set recording interval. When
the shutter button is pressed fully, recording starts.
[OFF] This is for taking pictures manually, frame by frame.
[Shooting
Interval]
(Only when [Auto Shooting] is set to [ON])
Sets the interval for automatic recording. A value between 1 and
60 seconds can be set in 1 second intervals.
Press 2/1 to select the recording interval (seconds), press 3/
4 to set it, and press [MENU/SET].
DMC-FZ1000_PPC_eng.book 51 ページ ２０１４年５月３０日 金曜日 午後５時９分
52
Recording Modes
SQT0196 (ENG)
11
Select the methods for creating a motion picture.
• The recording format is set to [MP4].
12
Press 3/4 to select [OK] and then press [MENU/SET].
∫ Changing the settings of Stop Motion Animation
You can change the settings in [Time Lapse/Animation] in the [Rec] menu.
Functions Customized for Various Subjects and Purposes
Applicable modes:
This function is useful for recording images in a quiet environment, public facility, etc. or
recording images of subjects such as babies or animals.
Select the menu.
Settings: [ON]/[OFF]
Applicable modes:
The center of the recording screen will be displayed as [+]. This
is convenient for operating the zoom while keeping the subject at
the center of the screen.
Settings: [ON]/[OFF]
[Rec Quality]
Sets the quality of a motion picture.
[4K/30p]/[FHD/60p]/[FHD/30p]/[HD/30p]/[VGA/30p]
[Frame Rate]
Sets the number of frames per second. The larger the number is,
the smoother the motion picture will be.
[60fps]
¢
/[30fps]/[15fps]/[10fps]/[7.5fps]/[6fps]/[3fps]/[1fps]
¢ Only when set to [FHD/60p]
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
Disabling Operational Sounds and the Output of Light at once ([Silent
Mode])
> [Custom] > [Silent Mode]
Displaying the center of the screen ([Center Marker])
> [Custom] > [Center Marker]
MENU
MENU
DMC-FZ1000_PPC_eng.book 52 ページ ２０１４年５月３０日 金曜日 午後５時９分
53
Recording Modes
(ENG) SQT0196
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level (brightness)
to be processed as a zebra pattern.
Optical Image Stabilizer
The camera detects jitter during recording and automatically corrects it, so you can record
images with reduced jitter.
Set the O.I.S. switch to [ON].
∫ Setting the Stabilizer in the [Rec] menu
1
Select the menu.
2
Press 3/4 to select the item and then press [MENU/SET].
Checking areas that may be white saturated ([Zebra Pattern])
> [Custom] > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[OFF]
—
[SET]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
> [Rec] > [Stabilizer]
[]
([Normal])
Vertical and horizontal shake are compensated for.
[]
([Panning])
Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking pictures which involves
turning the camera to track the movements of a subject which continues
to move in a fixed direction).
MENU
MENU
DMC-FZ1000_PPC_eng.book 53 ページ ２０１４年５月３０日 金曜日 午後５時９分
54
Recording Modes
SQT0196 (ENG)
Taking Pictures with the Zoom
Applicable modes:
You can zoom-out to record landscapes etc. in wide angle (Wide) or zoom-in to make
people and objects appear closer (Tele).
Zooms in without deteriorating the image quality.
Maximum magnification: 16k
This function works when any of the picture sizes (P38) indicated with is selected.
You can zoom in further than you can with the Optical Zoom without deteriorating the
image quality.
Maximum magnification: 32k
Applicable modes:
You can zoom in up to twice the original zoom magnification while minimizing the
deterioration of the image quality.
With the manual ring With the zoom lever
1 Set the manual ring selector switch to
[ZOOM].
2 Rotate the manual ring.
Rotate the zoom lever.
•
The smaller the rotation angle is, the slower
the zoom speed becomes; the greater the
rotation angle is, the faster the zoom speed
becomes.
Optical Zoom
Extended Optical Zoom (EX)
Intelligent Zoom
> [Rec] > [i.Zoom] > [ON]/[OFF]
> [Motion Picture] > [i.Zoom] > [ON]/[OFF]
T
W
W
T
T
W
MENU
MENU
DMC-FZ1000_PPC_eng.book 54 ページ ２０１４年５月３０日 金曜日 午後５時９分
55
Recording Modes
(ENG) SQT0196
Applicable modes:
Although the image quality deteriorates every time you zoom in further, you can zoom in
up to four times the original zoom magnification.
Taking pictures by using the flash
Applicable modes:
∫ Open/Close the built-in flash
A To open the flash
Slide the flash open lever.
B To close the flash
Press the flash until it clicks.
•
Forcibly closing the flash can damage the
camera.
• Make sure to close the built-in flash when it is not in use.
• Be careful when opening the flash as the flash will jump out.
• Be careful not to catch a finger when closing a flash bulb.
Applicable modes:
1 Select the menu.
2 Press 3/4 to select [Flash Mode] and then press [MENU/SET].
3 Press 3/4 to select the item and then press [MENU/SET].
[Digital Zoom]
> [Rec] > [Digital Zoom] > [ON]/[OFF]
> [Motion Picture] > [Digital Zoom] > [ON]/[OFF]
Changing Flash Mode
> [Rec] > [Flash]
‰ ([Forced Flash On]) The flash is activated every time regardless of the recording
conditions.
• Use this when your subject is back-lit or under
fluorescent light.
([Forced On/Red-
Eye])
([Slow Sync.]) When taking pictures against a dark background landscape,
this feature will slow the shutter speed when the flash is
activated. Dark background landscape will appear brighter.
([Slow Sync./Red-
Eye])
MENU
MENU
MENU
DMC-FZ1000_PPC_eng.book 55 ページ ２０１４年５月３０日 金曜日 午後５時９分
56
Using the Wi-Fi function
SQT0196 (ENG)
Wi-Fi
R
function/NFC function
∫ Describing method
When you see a step that says, “Select [Select a destination from History].” or a similar
step, press the cursor buttons to select [Select a destination from History], and press
[MENU/SET].
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone)
•
The information required for connecting the smartphone to this
unit (QR code, SSID and password) is displayed.
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
• This Owner’s Manual describes the procedure for [New Connection].
What you can do with the [Wi-Fi] button when connected to Wi-Fi
•
Following items can be selected.
¢ This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
• We strongly recommend that you set an encryption to maintain information security.
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[Wi-Fi]/[Fn2] button can be used in two ways, as [Wi-Fi] or
as [Fn2] (function 2).
At the time of purchase, it is initially set to [Wi-Fi].
[New Connection]
[Select a destination from History]
[Select a destination from Favorite]
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending Images]
¢
[Register the Current Destination to Favorite]
[Network Address]
DMC-FZ1000_PPC_eng.book 56 ページ ２０１４年５月３０日 金曜日 午後５時９分
57
Using the Wi-Fi function
(ENG) SQT0196
Controlling with a Smartphone/Tablet
This Owner’s Manual refers to both smartphones and tablets as “smartphones” from this
point on unless noted otherwise.
The “Image App” is an application provided by Panasonic.
•
OS (As of June 2014)
• Use the latest version.
• Read the [Help] in the “Image App” menu for further details on how to operate.
• The screen differs depending on the OS.
•
The screens and procedures described from this point on are those at the time when the model first
became available for purchase. The screens and procedures may change with version updates.
•
The service may not be able to be used properly depending on the type of smartphone being used.
For information on the “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
•
You can also set up a connection by entering a password directly. For details, refer to P60.
• When terminating the connection, refer to P60.
Installing the smartphone/tablet app “Image App”
App for Android
TM
:
Android 2.3.3 or higher
¢
App for iOS:
iOS 5.0 or higher
¢ Connecting to this unit with [Wi-Fi Direct] requires Android OS 4.0 or higher and Wi-Fi
Direct
TM
support.
1 Connect the smartphone to a network.
2 (Android) Select “Google Play
TM
Store”.
(iOS) Select “App Store
SM
”.
3 Enter “Panasonic Image App” or “LUMIX” into the search box.
4 Select “Panasonic Image App” and install it.
Connecting to a smartphone/tablet
If you are using an iOS
device
[iPhone/iPod touch/iPad]
If you are using an Android device
Is your device compatible with the NFC function?
Yes No
Using the QR code to set
up a connection
≠ P58
Setting up a connection
using the NFC function
≠ P59
Using the QR code to set
up a connection
≠ P59
DMC-FZ1000_PPC_eng.book 57 ページ ２０１４年５月３０日 金曜日 午後５時９分
58
Using the Wi-Fi function
SQT0196 (ENG)
1 Press and hold [Wi-Fi] on the camera.
2 Start “Image App” on your smartphone.
3 Select [QR code], and then select [OK].
4 Using “Image App”, scan the QR code
displayed on the screen of the camera.
A QR code
• If you press [MENU/SET] on the camera, the QR code will
be enlarged. When it is difficult to scan the QR code, try
enlarging it.
(If the scanning is not successful, move the camera and the
smartphone further away from each other and try again or
use a connection method other than the QR code method.)
5 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
6 Press the home button to close the browser.
7 Turn on the Wi-Fi function in the setting menu of the smartphone.
8 Select the SSID displayed on the screen of the camera.
9 Return to the home screen, and then start “Image App”. (P57)
•
Steps 2 through 6 are not required from the second time on.
If you are using an iOS device [iPhone/iPod touch/iPad]
Using the QR code to set up a connection
A
IMAGE APP
Panasonic Corporation
Wi-Fi
DMC-FZ1000_PPC_eng.book 58 ページ ２０１４年５月３０日 金曜日 午後５時９分
59
Using the Wi-Fi function
(ENG) SQT0196
• If [ ] is not displayed on the smartphone, the NFC function of the smartphone is disabled.
Read the operating instructions of your smartphone and enable it.
• This function can be used with the NFC compatible device with Android (OS version 2.3.3 or
higher). (excluding some models)
1 Launch “Image App” on your smartphone.
2 While [ ] is displayed on the screen of the
smartphone, touch the smartphone to [ ]
of the camera.
3 When the connection confirmation screen
is displayed on the camera, select [Yes].
4 Touch the smartphone to [ ] of the camera
again.
•
Steps 3
through 4 are not required from the second
time on.
• For information on the operation and settings of NFC-
compatible smartphones, refer to the operating
instructions of your device.
1 Press and hold [Wi-Fi] on the camera.
2 Start “Image App” on your smartphone.
3 Select [QR code].
4 Scan the QR code displayed on the screen of
the camera.
A QR code
• If you press [MENU/SET] on the camera, the QR code will
be enlarged. When it is difficult to scan the QR code, try
enlarging it.
(If the scanning is not successful, move the camera and
the smartphone further away from each other and try again
or use a connection method other than the QR code
method.)
When using an Android device
Setting up a connection using the NFC function
When using an Android device
Using the QR code to set up a connection
A
DMC-FZ1000_PPC_eng.book 59 ページ ２０１４年５月３０日 金曜日 午後５時９分
60
Using the Wi-Fi function
SQT0196 (ENG)
1 Press and hold [Wi-Fi] on the camera.
2 Turn on the Wi-Fi function in the setting menu of the
smartphone.
3 Select the SSID displayed on the screen of the
camera.
A SSID and password
4 Enter the password displayed on the screen of the
camera.
•
If you are using an Android device, marking the box for password
display will allow the device to display the password as you enter it.
5 On the smartphone, start “Image App”.
After use, terminate the connection to the smartphone.
1 Press [Wi-Fi] on the camera. (P56)
2 On the smartphone, close “Image App”.
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Entering a password to set up a connection
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Terminating the connection
If you are using an iOS device
On the screen of “Image App”, press the home button to close the app.
If you are using an Android device
On the screen of “Image App ”, press the return button twice to close the app.
A
Wi-Fi
0123456789ABC
DMC-FZ1000_PPC_eng.book 60 ページ ２０１４年５月３０日 金曜日 午後５時９分
61
Using the Wi-Fi function
(ENG) SQT0196
1 Connect to a smartphone. (P57)
2 Operate the smartphone.
1 Connect to a smartphone. (P57)
2 Operate the smartphone.
1 Connect to a smartphone. (P57)
2 Operate the smartphone.
•
The function can be assigned to the top, bottom,
left or right according to your preference.
• You cannot save pictures taken in RAW format,
motion pictures recorded with [AVCHD] or with
their picture quality size set to [MP4] in 4K.
Taking pictures via a smartphone/tablet (remote recording)
1 Select [ ].
2 Record an image.
•
The recorded images are saved in the camera.
• Some settings are not available.
Playing back images in the camera
1 Select [ ].
•
You can switch the images to be
displayed by selecting the icon (
A
)
on the top left of the screen. To
display images stored in the camera,
select [LUMIX].
2 Touch the image to enlarge it.
Saving images stored in the camera
1 Select [ ].
•
You can switch the images to be
displayed by selecting the icon (
A
)
on the top left of the screen. To
display images stored in the camera,
select [LUMIX].
2 Touch and hold an image, and drag
it to save it.
A
DMC-FZ1000_PPC_eng.book 61 ページ ２０１４年５月３０日 金曜日 午後５時９分
62
Using the Wi-Fi function
SQT0196 (ENG)
1 Play back the picture in the camera.
2 Launch “Image App” on the smartphone.
3 While [ ] is displayed on the connection
screen of the “Image App”, touch the
smartphone to [ ] of the camera.
•
If a connection attempt by touching fails, restart
the “Image App”, and then display the screen in
step
2 again.
• To transfer more than one image, repeat steps 1
and
3.
(They cannot be transferred as a batch.)
• After you set up a connection with the smartphone using the NFC function, the image will be
saved via the Wi-Fi connection.
• You do not need to keep the devices in contact with each other while an image is being
transferred.
1 Connect to a smartphone. (P57)
2 Operate the smartphone.
•
The function can be assigned to the top, bottom,
left or right according to your preference.
Saving images in the camera using the NFC function
The NFC function is not available for iOS devices (iPhone/iPod touch/iPad).
Sending images in the camera to an SNS
1 Select [ ].
•
You can switch the images to be
displayed by selecting the icon (
A
)
on the top left of the screen. To
display images stored in the camera,
select [LUMIX].
2 Touch and hold an image, and drag
it to send it to an SNS, etc.
•
The image is sent to a web service
such as an SNS.
DMC-FZ1000_PPC_eng.book 62 ページ ２０１４年５月３０日 金曜日 午後５時９分
63
Using the Wi-Fi function
(ENG) SQT0196
Setting up a connection to a PC via a wireless
access point
Prepare folders for receiving images on the PC before sending a picture to the PC.
•
Create a PC user account [account name (up to 254 characters) and password (up to 32
characters)] consisting of alphanumeric characters. An attempt to create a receive folder may
fail if the account includes non-alphanumeric characters.
∫ When using “PHOTOfunSTUDIO ”
1 Install “PHOTOfunSTUDIO” to the PC.
•
For details on hardware requirements and installation, read “About the supplied software”
(P66).
2 Create a folder that receives images with “PHOTOfunSTUDIO”.
•
To create the folder automatically, select [Auto-create]. To specify a folder, create a new
folder, or set a password to the folder, select [Create manually].
• For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).
∫ When not using “PHOTOfunSTUDIO ”
(For Windows)
Supported OS: Windows XP/Windows Vista/Windows 7/Windows 8/Windows 8.1
Example: Windows 7
1 Select a folder you intend to use for receiving, then right-click.
2 Select [Properties], then enable sharing of the folder.
•
For details, refer to the operating instructions of your PC or Help on the OS.
(For Mac)
Supported OS: OS X v10.5 to v10.9
Example: OS X v10.8
1 Select a folder you intend to use for receiving, then click on the items in the
following order.
[File] [Get Info]
2 Enable sharing of the folder.
•
For details, refer to the operating instructions of your PC or Help on the OS.
You can send pictures and motion pictures recorded with this unit to a PC.
The connection methods described in this manual are examples. For details on other
connection methods, refer to “Owner’s Manual for advanced features (PDF format)”.
To create a folder that receives images
When sending images to PC
Preparations:
•
If the workgroup of the destination PC has been changed from the standard setting, you also
need to change the setting of this unit in [PC Connection].
DMC-FZ1000_PPC_eng.book 63 ページ ２０１４年５月３０日 金曜日 午後５時９分
64
Using the Wi-Fi function
SQT0196 (ENG)
1 Press [Wi-Fi].
2 Select [New Connection].
3 Select the connection method.
4 Select [PC].
5 Select the connection method.
Example: Selecting [WPS (Push-Button)] to set up a
connection
6 On the camera, perform the operation that matches your
purpose.
¢ When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
• To change the setting or disconnect, press [Wi-Fi]. (P56)
• Folders sorted by the sent date are created in the specified folder, and pictures are saved in
those folders.
• If the screen for a user account and password entry appears, enter the one you set on your PC.
• When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank
character), etc., it may not be recognized correctly.
If a connection attempt fails, we recommend that you change the computer name (or NetBIOS
name) to the one consisting of only alphanumeric characters, with a maximum of
15 characters.
Sending an image each time a recording is made
([Send Images While Recording])
Available file format: JPEG/RAW
Select and send the images
([Send Images Stored in the Camera])
Available file format: ALL format
1 Select [Via Network].
2 Select [WPS (Push-Button)].
3 Press the wireless access point WPS button until it
switches to WPS mode.
Sending an image each time a recording is made
([Send Images While Recording])
1 Select the PC you want to connect to and the destination
folder.
¢
2 Take a picture with the camera.
Select and send the images
([Send Images Stored in the Camera])
1 Select the PC you want to connect to and the destination
folder.
¢
2 Select [Single Select] or [Multi Select], and then select
the images you want to send.
DMC-FZ1000_PPC_eng.book 64 ページ ２０１４年５月３０日 金曜日 午後５時９分
65
Others
(ENG) SQT0196
Playing Back Pictures on a TV Screen
• Confirm the terminals on your TV and use a cable compatible with the terminals.
Image quality may vary with the connected terminals.
1
Connect the camera and a TV.
2
Turn on the TV and select the input to match the connector in use.
Preparations: Turn this unit and the TV off.
•
Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged
in obliquely or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
To connect with an HDMI micro cable
•
Use a “High Speed HDMI micro cable” with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI micro cable” [Type D–Type A plug, up to 2 m (6.6 feet) long]
• Check the [HDMI Mode (Play)].
• During 24p motion picture playback, please set [HDMI Mode (Play)] to [AUTO].
For settings other than [AUTO], it cannot output at 24 frames/second.
• Audio will be played back as stereo (2ch).
• No picture is displayed on the screen of this unit.
• When [VIERA Link] is set to [ON], operations using the buttons on the camera are restricted.
A Align the marks, and insert.
B HDMI micro cable
C HDMI socket
To connect with an AV cable (optional)
•
Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
• Audio will be played back in monaural.
D Align the marks, and insert.
E AV cable (optional)
F [AV OUT/DIGITAL] terminal
• The color of the terminal is gold.
G Yellow: to the video input socket
H White: to the audio input socket
DMC-FZ1000_PPC_eng.book 65 ページ ２０１４年５月３０日 金曜日 午後５時９分
66
Others
SQT0196 (ENG)
3
Turn the camera on and then press [(].
• Input of the TV will switch automatically and playback screen is displayed when
connected to a VIERA Link compatible TV using an HDMI micro cable with the [VIERA
Link] set to [ON].
• No sound is output from the camera speakers.
• Read the operating instructions for the TV.
Saving still pictures and motion pictures on
your PC
∫ PC that can be used
The unit can be connected to any PC capable of recognizing a mass storage device.
The supplied DVD includes the following software.
Install the software on to your computer before use.
•
PHOTOfunSTUDIO 9.5 PE (Windows XP/Windows Vista/Windows 7/Windows 8/Windows 8.1)
This software allows you to manage images. For example, you can send pictures and motion
pictures to a PC and sort them by recording date or model name. You can also perform
operations such as writing images to a DVD, processing and correcting images, and editing
motion pictures.
• SILKYPIX Developer Studio 4.1 SE
(Windows XP/Windows Vista/Windows 7/Windows 8/Windows 8.1, Mac OS X v10.5/
v10.6/v10.7/v10.8/v10.9)
This is software to edit RAW format images.
Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a personal
computer.
• Windows support: Windows XP/Windows Vista/Windows 7/Windows 8/Windows
8.1
• Mac support: OS X v10.5 to v10.9
AVCHD motion pictures may not be imported correctly when copied as files or
folder
•
With Windows, always import AVCHD motion pictures using “PHOTOfunSTUDIO”, one of the
programs on the DVD (supplied).
• With a Mac, AVCHD motion pictures can be imported using “iMovie”.
Please note that importing is not possible depending on the picture quality.
(For details about iMovie, please contact Apple Inc.)
About the supplied software
DMC-FZ1000_PPC_eng.book 66 ページ ２０１４年５月３０日 金曜日 午後５時９分
67
Others
(ENG) SQT0196
• LoiLoScope 30 day full trial version (Windows XP/Windows Vista/Windows 7/
Windows 8/Windows 8.1)
LoiLoScope is a video editing software where that draws out the full power of your PC. Creating
videos is as easy as organizing cards on top of a desk. Use your music, picture and video files
to create videos to share with your friends and family by burning it to a DVD, uploading it to
websites, or simply share your videos with your friends via e-mail.
– This will only install a shortcut to the trial version download site.
∫ Installing supplied software
•
Before inserting the DVD, close all running applications.
1 Check the environment of your PC.
•
Operating environment of “PHOTOfunSTUDIO”
– OS:
Windows
R
XP (32bit) SP3,
Windows Vista
R
(32bit) SP2,
Windows
R
7 (32bit/64bit) or SP1,
Windows
R
8 (32bit/64bit),
Windows
R
8.1 (32bit/64bit)
– CPU:
Pentium
R
III 500 MHz or higher (Windows
R
XP),
Pentium
R
III 800 MHz or higher (Windows Vista
R
),
Pentium
R
III 1 GHz or higher (Windows
R
7/Windows
R
8/Windows
R
8.1)
– Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
– RAM:
512 MB or more (Windows
R
XP/Windows Vista
R
),
1 GB or more (Windows
R
7 32bit/Windows
R
8 32bit/Windows
R
8.1 32bit),
2 GB or more (Windows
R
7 64bit/Windows
R
8 64bit/Windows
R
8.1 64bit)
– Free hard disk space:
450 MB or more for installing software
•
Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further operating environment.
• For details on “SILKYPIX Developer Studio”, please read the support site given on P67.
2 Insert the DVD with the supplied software.
3 Click on the [Applications] on the install menu.
•
If the automatic playback screen is displayed, you can display the menu by selecting and
executing [Launcher.exe].
• In Windows 8/Windows 8.1, you can display the menu by clicking a message that is
displayed after inserting the DVD and then selecting and executing [Launcher.exe].
• You can also display the menu by double-clicking [SFMXXXX] in [Computer] (XXXX
differs depending on the model).
4 Click on the [Recommended Installation].
•
Proceed with installation according to messages appearing on the screen.
For details on how to use the SILKYPIX Developer Studio, refer to the “Help” or the
Ichikawa Soft Laboratory’s support website:
http://www.isl.co.jp/SILKYPIX/english/p/support/
For more information on how to use LoiLoScope, read the LoiLoScope manual
available for download at the link below.
Manual URL: http://loilo.tv/product/20
DMC-FZ1000_PPC_eng.book 67 ページ ２０１４年５月３０日 金曜日 午後５時９分
68
Others
SQT0196 (ENG)
• The software compatible with your PC will be installed.
• On the Mac, SILKYPIX can be installed manually.
1 Insert the DVD with the supplied software.
2 Double-click the application folder on the DVD.
3 Double-click on the automatically displayed folder.
4 Double-click the icon in the application folder.
Not available in these cases:
•
“PHOTOfunSTUDIO” and “LoiLoScope” are not compatible with Mac.
∫ Transferring pictures to a PC
1 Connect the computer and camera with the USB connection cable (supplied).
•
Please turn this unit on and your PC before connecting.
• Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged in
obliquely or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
• Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
2 Press 3/4 to select [PC], and then press [MENU/SET].
•
If [USB Mode] is set to [PC] in the [Setup] menu in advance, the camera will be
automatically connected to the PC without displaying the [USB Mode] selection screen.
3 Copy the images to a PC using “PHOTOfunSTUDIO”.
•
Do not delete or move copied files or folders in Windows Explorer.
When viewing in “PHOTOfunSTUDIO”, you will not be able to play back or edit.
∫ Copying to a PC without using “PHOTOfunSTUDIO”
If you are not able to install “PHOTOfunSTUDIO”, you can copy files and folders to your
PC by dragging and dropping files from this unit.
Preparations: Install “PHOTOfunSTUDIO” to the PC.
A USB connection cable (supplied)
B Align the marks, and insert.
C [AV OUT/DIGITAL] terminal
• The color of the terminal is gold.
DMC-FZ1000_PPC_eng.book 68 ページ ２０１４年５月３０日 金曜日 午後５時９分
69
Others
(ENG) SQT0196
Monitor Display/Viewfinder Display
• The following images are examples of when the display screen is set to [ ] (monitor
style) in the monitor.
∫ In recording
1
Recording Mode (P21)
Custom settings (P36)
Photo Style
Creative control adjustment
display
‰ŒFlash Mode (P55)
Flash
Recording format/
Recording quality (P23)
Picture size/Aspect Ratio
(P38)
Card (displayed only during
recording)
Elapsed recording time
¢1
(P22)
Simultaneous recording
indicator
Automatic viewfinder/
monitor switching
Peaking
Highlight Shadow
HDR
98
98
98
2
00
00
2
00
2
00
60
60
602.8
2.8
2.8
AFS
AFS
AFS
L
3:2
0
0
AEL
AEL
AEL
BKT
BKT
BKT
AWB
AWB
AWB
ラュン
ラュン
P
C2-1
EXPSEXPS
WL
AVCHD
FHD
60i
L
3:2
8
m
30
s
ラュン
Multi exposure
Electronic shutter
2
A › Quality (P39)
High Speed Video
Focus Mode (P41)
š
Ø
AF Mode (P40)
Face Recognition
AF Lock (P43)
Burst (P47)
Auto Bracket (P48)
Self-timer (P49)
Time Lapse Shot (P49)
Stop Motion Animation
(P51)
Battery indication
Picture Mode (Still picture
priorities)
Luminance Level
Macro recording (P43)
Level Shot
Optical Image Stabilizer
(P53)
Jitter alert
Recording state (Flashes
red.)/Focus (Lights green.)
(P22)
Focus (Under low
illumination)
Connected to Wi-Fi
Histogram
120fps
AFS AFF AFC
MF
A
F
L
LOW
DMC-FZ1000_PPC_eng.book 69 ページ ２０１４年５月３０日 金曜日 午後５時９分
70
Others
SQT0196 (ENG)
¢1 m: minute, s: second
¢2 This is displayed for about 5 seconds when the camera is turned on, after setting the clock
and after switching from Playback Mode to Recording Mode.
¢3 This is displayed during countdown.
¢4 It is possible to switch the display between the number of recordable pictures and available
recording time with the [Remaining Disp.] setting in the [Custom] menu.
3
Name
¢
2
Number of days that have passed since the
departure date
¢
2
Age
¢
2
Location
¢
2
Current date and time/Travel destination
setting
¢
2
: “
AF area
Spot metering target (P45)
Self-timer
¢3
(P49)
Silent Mode (P52)
External Microphone
Zoom Microphone
Mic Level Display
Mic Level Limiter (OFF)
98
98
98
2
00
00
2
00
2
00
60
60
602.8
2.8
2.8
AFS
AFS
AFS
L
3:2
0
0
AEL
AEL
AEL
BKT
BKT
BKT
AWB
AWB
AWB
ラュン
ラュン
LMT
OFF
AE Lock (P43)
Metering Mode (P45)
Program Shift
2.8
Aperture value
60
Shutter speed
Exposure compensation value
(P44)
Brightness
Manual Exposure Assistance
ISO sensitivity (P44)
4
Dial operation guide
White Balance Bracket
White Balance Fine Adjustment
VÐîÑ
White Balance (P37)
Color
98
Number of recordable pictures
¢4
Available recording time
¢1, 4
5
Exposure meter (P31)
Zoom
A
E
L
BKT
AWB
1
R8
m
30
s
DMC-FZ1000_PPC_eng.book 70 ページ ２０１４年５月３０日 金曜日 午後５時９分
71
Others
(ENG) SQT0196
On-monitor recording information
1
Recording Mode (P21)
F2.8
Aperture value (P22)
1/60
Shutter speed (P22)
Battery indication
2
ISO sensitivity (P44)
Exposure compensation
value (P44)
Brightness
Manual Exposure
Assistance
‰ŒFlash Mode (P55)
Flash
3
Single (P46)
Burst (P47)
Auto Bracket (P48)
F 2.8
98
AWB
1/60
0 0
0
Fn
ISO
AUTO
Wi-Fi
L
3:2
AFSAFS
C1
EXPSEXPS
ISO
200
0
0
WL
Self-timer (P49)
Time Lapse Shot (P49)
Stop Motion Animation
(P51)
Focus Mode (P41)
š
Ø
AF Mode (P40)
A › Quality (P39)
Picture size/Aspect Ratio
(P38)
Wi-Fi Wi-Fi (P56)
Function button setting
4
Photo Style
VÐîÑ
White Balance (P37)
Intelligent Dynamic Range
Control
Metering Mode (P45)
98
Number of recordable
pictures
Available recording time
AFS
AFF
AFC
MF
L
3:2
Fn
AWB
1
R8
m
30
s
DMC-FZ1000_PPC_eng.book 71 ページ ２０１４年５月３０日 金曜日 午後５時９分
72
Others
SQT0196 (ENG)
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
•
Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes
more detailed information.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
•
This feature can only be used with pictures that comply with the DCF standard.
Perform formatting (P18) on this unit after saving necessary data on a PC, etc.
[Memory Card Error]/[This memory card cannot be used]
•
Use a card compatible with this unit. (P17)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
Insert the card again.
• Insert a different card.
[Read Error/Write Error
Please check the card]
•
It has failed to read or write data.
Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to
read or write the data again.
• The card may be broken.
• Insert a different card.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or Panasonic.
• If the battery terminal is dirty, clean it and remove any objects.
[Failed to connect wireless access point]/[Connection failed]/[No destination found]
• Check following regarding the wireless access point.
– The wireless access point information set on this unit is wrong.
Check the authentication type, encryption type, and encryption key.
– Power of the wireless access point is not turned on.
– Setting of the wireless access point is not supported by this unit.
• Check the network setting of the destination.
• Radio waves from other devices may block the connection to a wireless access point.
Check other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[No picture to send]
•
This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file format of the image to send.
DMC-FZ1000_PPC_eng.book 72 ページ ２０１４年５月３０日 金曜日 午後５時９分
73
Others
(ENG) SQT0196
Menu list
This menu lets you set the aspect ratio, number of pixels and other aspects of the pictures
you are recording.
•
[Photo Style], [AFS/AFF], [Metering Mode], [Highlight Shadow], [i.Dynamic], [i.Resolution],
[i.Zoom] and [Digital Zoom] are common to both the [Rec] menu and [Motion Picture] menu.
Changing these settings in one of these menus is reflected in other menu.
[Rec]
[Photo Style]
You can select effects to match the type of image you wish to
record.
You can adjust the color and image quality of the effects.
[Aspect Ratio] Sets the aspect ratio of the image.
[Picture Size] Set the number of pixels.
[Quality] Set the compression rate at which the pictures are to be stored.
[AFS/AFF]
Assigns [AFS] or [AFF] to [AFS/AFF] of the focus mode lever.
[Metering Mode] Sets the light metering method for measuring brightness.
[Burst Rate] Sets the burst speed for burst recording.
[Auto Bracket]
Sets single/burst recording, compensation range and recording
sequence for Auto Bracket recording.
[Self Timer] Sets the manner in which the self-timer works.
[Time Lapse/Animation]
Makes the recording settings for Time Lapse Shot and Stop Motion
Animation.
[Highlight Shadow]
You can adjust the brightness of bright and dark portions on an
image while checking the brightness on the screen.
[i.Dynamic] (Intelligent
dynamic range control)
Adjusts the contrast and exposure.
[i.Resolution] Records pictures with more defined outlines and sense of clarity.
[iHandheld Night Shot]
Pictures of the night scenery will be taken at a high burst speed and
composed into a single picture.
[iHDR]
There is, for example, strong contrast between the background and
the subject, multiple still pictures are recorded with differing
exposures and combined to create a single still picture rich in
gradation.
[HDR]
You can combine 3 pictures with different levels of exposure into a
single picture with rich gradation.
DMC-FZ1000_PPC_eng.book 73 ページ ２０１４年５月３０日 金曜日 午後５時９分
74
Others
SQT0196 (ENG)
[Multi Exp.]
Gives an effect like multi exposure. (up to
4 times equivalent per a
single image)
[Panorama Settings]
Sets the recording direction and image effect for panorama
recording.
[Shutter Type]
You can choose between taking pictures with the mechanical
shutter and the electronic shutter.
[Flash] Sets the manner in which the flash works.
[Red-Eye Removal]
Automatically detects red-eye caused by the flash and corrects the
image data accordingly.
[ISO Limit Set]
When the ISO sensitivity is set to [AUTO] or [ ], an optimal ISO
sensitivity is set with the selected value as an upper limit.
[ISO Increments]
The ISO sensitivity settings values changes in steps of 1/3 EV or
1 EV.
[Extended ISO] You can extend the available ISO sensitivity values.
[Long Shtr NR]
You can eliminate the noise caused by recording with a slower
shutter speed.
[i.Zoom]
You can raise the zoom magnification with minimum image
deterioration.
[Digital Zoom]
Increases the Tele effect.
The higher the level of magnification, the greater the degradation in
image quality.
[Color Space]
Set this when you want to correct the color reproduction of the
recorded pictures on a PC, printer etc.
[Stabilizer]
When camera shake is sensed during recording, the camera
corrects it automatically.
[Face Recog.]
Sets the focus and exposure automatically prioritizing registered
faces.
[Profile Setup]
If you set the name and birthday of your baby or pet in advance,
you can record their name and age in months and years in the
images.
DMC-FZ1000_PPC_eng.book 74 ページ ２０１４年５月３０日 金曜日 午後５時９分
75
Others
(ENG) SQT0196
This menu lets you set the [Rec Format], [Rec Quality], and other aspects for motion
picture recording.
•
[Photo Style], [AFS/AFF], [Metering Mode], [Highlight Shadow], [i.Dynamic], [i.Resolution],
[i.Zoom] and [Digital Zoom] are common to both the [Rec] menu and [Motion Picture] menu.
Changing these settings in one of these menus is reflected in other menu.
– For details, refer to the explanation for the corresponding setting in the [Rec] menu.
[Motion Picture]
[Rec Format] Sets the file format for the motion pictures you record.
[Rec Quality] This sets up the picture quality of motion pictures.
[Exposure Mode]
Select the method for setting the aperture value and shutter speed
in Creative Video Mode.
[High Speed Video]
You can record slow motion pictures by performing ultra-high-speed
recording.
[Picture Mode]
Sets the recording method for still pictures during motion picture
recording.
[Continuous AF]
Continues to focus on the subject for which focus has been
achieved.
[Level Shot]
The camera automatically detects its tilt and corrects the motion
pictures you record to a level position to prevent them from being
skewed.
[Luminance Level] Select the luminance range to match the use of video.
[Flkr Decrease]
The shutter speed can be fixed to reduce the flicker or striping in the
motion picture.
[Mic Level Disp.]
Set whether or not the mic levels are displayed on the recording
screen.
[Mic Level Adj.] Adjust the sound input level to 19 different levels.
[Special Mic.]
Sets the sound recording method when a stereo shotgun
microphone (optional) is connected.
[Mic Level Limiter] Adjusts the sound input level automatically.
[Wind Cut]
You can reduce the wind noise effectively when recording with
sound.
[Zoom Mic]
Coupled to the zoom operation, it will clearly record far sounds
with tele, and surrounding sounds with wide.
DMC-FZ1000_PPC_eng.book 75 ページ ２０１４年５月３０日 金曜日 午後５時９分
76
Others
SQT0196 (ENG)
Operation of the unit, such as displaying of the screen and button operations, can be set
up according to your preferences. Also, it is possible to register the modified settings.
[Custom]
[Cust.Set Mem.] Registers the current camera settings as custom set.
[Silent Mode] Disables operational sounds and output of light at once.
[AF/AE Lock]
Sets the fixed content for focusing and exposure when the AF/AE
lock is on.
[AF/AE Lock Hold]
This will set the operation of [AF/AE LOCK] button when taking a
picture with fixed focus or exposure.
[Shutter AF]
Set whether or not the focus is adjusted automatically when the
shutter button is pressed halfway.
[Half Press Release]
The shutter will immediately fire when the shutter button is pressed
halfway.
[Quick AF]
Speeds up the focusing that takes place when you press the shutter
button.
[Eye Sensor AF]
The camera automatically adjusts the focus when the eye sensor is
active.
[Pinpoint AF Time]
Sets the time for which the screen is enlarged when the shutter
button is pressed halfway with Auto Focus Mode set to [ ].
[AF Assist Lamp]
AF assist lamp will illuminate the subject when the shutter button is
pressed half-way making it easier for the camera to focus when
recording in low light conditions.
[Direct Focus Area]
Moves the AF area or MF assist using the cursor button when
recording.
[Focus/Release Priority] It will set so no picture can be taken when it is out of focus.
[AF+MF]
You can set the focus manually after the automatic focus has
finished.
[MF Assist] Sets the display method of MF Assist (enlarged screen).
[MF Guide]
When you set the focus manually, an MF guide that allows you to
check the direction to achieve focus is displayed.
[Peaking]
In-focus portions are highlighted when focus is being adjusted
manually.
[Histogram] This allows you to set either to display or not display the histogram.
[Guide Line]
This will set the pattern of guide lines displayed when taking a
picture.
DMC-FZ1000_PPC_eng.book 76 ページ ２０１４年５月３０日 金曜日 午後５時９分
77
Others
(ENG) SQT0196
[Center Marker] Displays [+], which indicates the center of the recording screen.
[Highlight]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[Zebra Pattern]
Indicates parts that may be whited out through overexposure in a
zebra pattern.
[Monochrome Live
View]
You can display the recording screen in black and white.
[Constant Preview]
You can check the effects of the chosen aperture and shutter speed
on the recording screen in Manual Exposure Mode.
[Expo.Meter] Set whether or not to display the exposure meter.
[Dial Guide] Set whether or not to display the dial operation guide.
[LVF Disp.Style] This will set the display style of the viewfinder.
[Monitor Disp. Style] This will set the display style of the monitor.
[Monitor Info. Disp.] Display the recording information screen.
[Rec Area]
This changes the angle of view during motion picture recording and
still picture recording.
[Remaining Disp.]
This will switch display between the number of recordable pictures
and available recording time.
[Auto Review]
Set the length of time that the picture is displayed after taking the
still picture.
[Fn Button Set] You can assign frequently-used functions to particular buttons.
[Zoom Lever] Change the zoom setting of the zoom lever.
[Manual ring (Zoom)] Change the zoom setting of the manual ring.
[Zoom Resume] Saves the zoom position when you turn off the camera.
[Q.MENU] Switch the setting method of Quick Menu.
[Video Button] Enables/disables the motion picture button.
[Eye Sensor]
Setting the eye sensor sensitivity and the method for switching
between the monitor and viewfinder.
[Menu Guide]
Set the screen that is displayed when the mode dial is set to and
.
DMC-FZ1000_PPC_eng.book 77 ページ ２０１４年５月３０日 金曜日 午後５時９分
78
Others
SQT0196 (ENG)
This menu lets you perform the clock settings, select the operating beep tone settings and
set other settings which make it easier for you to operate the camera.
You can also configure the settings of Wi-Fi related functions.
[Setup]
[Clock Set] Setting Date/Time.
[World Time]
Sets the times for the region where you live and your holiday
destination.
[Travel Date]
Departure date and return date of the trip as well as the name of the
travel destination can be set.
[Wi-Fi] Configure the each setting for Wi-Fi functions.
[Beep]
Set the volume for electronic noises and the electronic shutter
noise.
[Live View Mode] Set the frame rate of the recording screen (Live View screen).
[Monitor Display]/
[Viewfinder]
Brightness, color, or red or blue tint of the Monitor/viewfinder is
adjusted.
[Monitor Luminance] Set the monitor brightness to suit the amount of surrounding light.
[Economy]
Suppresses the unit’s power consumption to prevent the battery
from being run down.
[USB Mode]
Sets the communication method when connecting using the USB
connection cable (supplied).
[TV Connection] This sets how the unit connects to a television etc.
[Menu Resume] Stores the location of the last-used menu item for each menu.
[Menu Background] Set the background color for the menu screen.
[Menu Information]
Descriptions of menu items or their settings are displayed on the
menu screen.
[Language] Set the language displayed on the screen.
[Version Disp.]
It is possible to check which version of firmware is on the
camera.
[Exposure Comp. Reset]
An exposure value can be reset when the Recording Mode is
changed or the camera is turned off.
[No.Reset] Returns the image file number to 0001.
[Reset] The recording or setup/custom settings are reset to the default.
[Reset Wi-Fi Settings]
Reset all settings in the [Wi-Fi] menu to factory default settings.
(Excluding [LUMIX CLUB])
[Format] The card is formatted.
DMC-FZ1000_PPC_eng.book 78 ページ ２０１４年５月３０日 金曜日 午後５時９分
79
Others
(ENG) SQT0196
This menu lets you set the Protection, Cropping or Print Settings, etc. of recorded pictures.
[Playback]
[Slide Show] Selects the type etc. of the images and plays back in order.
[Playback Mode]
Selects the type etc. of the images and plays back only particular
images.
[Location Logging]
You can write location information (longitude/latitude) on images
sent from the smartphone.
[RAW Processing]
You can convert the pictures taken in the RAW format into the
JPEG format on the camera.
[Title Edit] Input texts (comments) on the recorded pictures.
[Text Stamp]
Stamps the recorded pictures with recording date and time, names,
travel destination, travel date, etc.
[Video Divide] Splits the recorded motion picture in two.
[Time Lapse Video]
Creates a motion picture from a set of group pictures recorded with
the [Time Lapse Shot].
[Stop Motion Video] Creates a motion picture from the Stop Motion Animation group.
[Resize] Reduces the image size (number of pixels).
[Cropping] Crops the recorded image.
[Rotate] Rotate pictures manually in 90o steps.
[Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[Favorite] Marks can be added to images, and images can be set as favorites.
[Print Set] Sets the images for printing and the number of prints.
[Protect] Protects images to prevent deletion by mistake.
[Face Rec Edit] Removes or changes information relating to personal identity.
[Picture Sort] Sets the display order of the images you play back on the camera.
[Delete Confirmation]
This sets which option, [Yes] or [No], will be highlighted first when
the confirmation screen for deleting a picture is displayed.
DMC-FZ1000_PPC_eng.book 79 ページ ２０１４年５月３０日 金曜日 午後５時９分
80
Others
SQT0196 (ENG)
Troubleshooting
First, try out the following procedures.
•
Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes
more detailed information.
• The battery is exhausted.
> Charge the battery.
• If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Economy] etc.
• Is the linked operation of VIERA Link enabled?
> If you are not using VIERA Link, set [VIERA Link] to [OFF].
• The subject is beyond the focus range of the camera.
• There is camera shake (jitter) or the subject is moving slightly.
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
• Is [Shutter AF] in the [Custom] menu set to [OFF]?
• Is the AF Lock (P43) applied incorrectly?
• The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures. (P20)
> We recommend using a tripod and the self-timer (P49) when taking pictures with a slow
shutter speed.
• This is characteristic of MOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
When a subject moves across the image very fast, the subject may appear slightly distorted.
• Are you taking pictures with the electronic shutter?
> When using the electronic shutter, lowering the shutter speed may reduce the effect of the
horizontal stripes.
• When noticeable flicker or striping is seen under lighting such as a fluorescent or LED lighting
fixture, you can reduce the flicker or striping by setting up [Flkr Decrease] and fixing the shutter
speed. It is possible to select a shutter speed from [1/50], [1/60], [1/100], or [1/120].
You can set the shutter speed manually in the Creative Video Mode. (P34)
If the problem is not resolved, it may be improved by selecting [Reset] on the
[Setup] menu.
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
This unit is turned off automatically.
The subject is not focused properly.
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
Striping or flicker appears under lighting such as a fluorescent or LED lighting fixture.
The subject appears distorted.
DMC-FZ1000_PPC_eng.book 80 ページ ２０１４年５月３０日 金曜日 午後５時９分
81
Others
(ENG) SQT0196
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and color. These are a result of the characteristics
of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may
change or horizontal striping may appear on the screen.
• You may not be able to record for a short while after turning this unit on when using a large
capacity card.
• Depending on the environment at the time of motion picture recording, the screen may be
blacked out momentarily or the unit may record noise due to static electricity or powerful
electromagnetic waves (radio towers, high voltage power lines, etc.).
• Is the flash closed?
> Open the flash. (P55)
• When the electronic shutter is used, the flash is not activated.
> Set [Shutter Type] to [AUTO] or [MSHTR].
• When [Silent Mode] is set to [ON], the flash is not activated. (P52)
> Set [Silent Mode] to [OFF].
• Is the card inserted?
• Is there a picture on the card?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the “PHOTOfunSTUDIO” software in the DVD (supplied) to write
pictures from PC to card.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play].
• Is this a non-standard picture, a picture which has been edited using a PC or a picture which
was taken by another make of digital camera?
• Did you remove the battery immediately after picture-taking or did you take the picture using a
battery with a low remaining charge?
> To delete such pictures, make a backup of the data and format the card.
The brightness or the hue of the recorded picture is different from the actual
scene.
Recording motion pictures is not possible.
The screen may be blacked out momentarily, or the unit may record noise.
The flash is not activated.
The picture is not played back.
There are no recorded pictures.
The folder number and the file number are displayed as [—] and the screen turns
black.
DMC-FZ1000_PPC_eng.book 81 ページ ２０１４年５月３０日 金曜日 午後５時９分
82
Others
SQT0196 (ENG)
• The picture quality or sound quality of recorded motion pictures may be deteriorated even when
these are played back with the compatible devices. Also, recording information may not be
displayed correctly.
∫ General tips for using a Wi-Fi connection
•
Try [Reset Wi-Fi Settings] in the [Setup] menu.
• Use within the communication range of the device to be connected.
• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency
operated nearby?
> Radio waves may get interrupted when used simultaneously. Use them sufficiently away
from the device.
• When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted.
(A message such as [Communication error] is displayed.)
•
If you place the camera on a metal table or shelf, the radio waves may be adversely affected. In such
cases, you may not be able to establish a connection. Move the camera away from the metal surface.
∫ About a wireless access point
•
Check if the wireless access point to connect is in operating state.
• The camera may not display or connect to a wireless access point depending on the radio
wave condition.
> Move this unit closer to the wireless access point.
> Remove the obstacles between this unit and the wireless access point.
> Change the direction of this unit.
> Change the location and orientation of the wireless access point.
> Perform the [Manual Input].
•
It may not display even if the radio waves exist depending on the setting of the wireless access point.
> Check the settings of the wireless access point.
> When the network SSID of the wireless access point is set not to broadcast, the wireless
access point may not be detected. Enter the network SSID to start the connection or enable
the SSID broadcast of the wireless access point.
• Connection types and security setting methods are different depending on the wireless access
point. (Refer to the operating instructions of the wireless access point.)
• Is the 5 GHz/2.4 GHz switchable wireless access point connected to other equipment using the
5 GHz band?
> The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is
recommended. It cannot be used simultaneously with this camera if it is not compatible.
• When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not
be possible.
Motion pictures recorded with this model cannot be played back on other equipment.
A Wi-Fi connection cannot be established.
Radio waves get disconnected.
Wireless access point is not displayed.
Images cannot be transmitted to a PC.
DMC-FZ1000_PPC_eng.book 82 ページ ２０１４年５月３０日 金曜日 午後５時９分
83
Others
(ENG) SQT0196
• Some OS versions, including Windows 8, use two types of accounts: a local account and a
Microsoft account.
> Be sure to use the user name and password for the local account.
If you haven’t set up a local account, please create one.
• Image cannot be transmitted when the battery indicator is flashing red.
• Is the size of the image too large?
> Reduce the image size at [Size], and then send.
> Transmit after dividing the motion picture with [Video Divide].
• File format of the motion picture that can be sent differs depending on the destination.
• Capacity or number of images in the web service is full.
>
Login to “LUMIX CLUB”, and check the status of the destination on the web service link settings.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?
> Connect the camera to the TV with the AV cable (optional), or with the HDMI micro cable,
and then play back the motion pictures on the camera. (P65)
• Is it connected properly with the HDMI micro cable? (P65)
• Is the [VIERA Link] on this unit set to [ON]?
>
If the input channel does not switch automatically, use the remote control for the TV to switch it.
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On].
(Refer to the operating instructions of the TV for details.)
• It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
•
The sound, which is caused by the automatic adjustment of the aperture, is heard when the brightness
has changed due to, for example, zooming or the movement of the camera. This is not a malfunction.
• The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
• If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P18)
•
When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a malfunction.
When I try to set up a Wi-Fi connection with a Windows 8 PC, my user name and
password are not recognized, so I cannot connect to the PC.
Transmission of the image fails midway. Some images cannot be transmitted.
The motion pictures cannot be played back on a TV.
VIERA Link does not work.
There is a sound from lens unit.
The camera becomes warm.
The clock is reset.
Zooming stops instantaneously.
DMC-FZ1000_PPC_eng.book 83 ページ ２０１４年５月３０日 金曜日 午後５時９分
84
Others
SQT0196 (ENG)
Specifications
Specifications are subject to change without notice.
Digital Camera:
Information for your safety
Power Source: DC 8.4 V
Power Consumption: 2.4 W (When recording with Monitor)
2.8 W (When recording with Viewfinder)
1.7 W (When playing back with Monitor)
1.7 W (When playing back with Viewfinder)
Camera effective pixels 20,100,000 pixels
Image sensor 1q MOS sensor, total pixel number 20,900,000 pixels,
Primary color filter
Lens Optical 16k zoom, f = 9.12 mm to 146 mm
(35 mm film camera equivalent: 25 mm to 400 mm)
Wide: F2.8 to F8.0 (when recording motion pictures: F2.8 to F11)
Tele: F4.0 to F8.0 (when recording motion pictures: F4.0 to F11)
Image Stabilizer Optical method
Focus range
AF 30 cm (0.98 feet) (Wide)/1 m (3.3 feet) (Tele) to ¶
AF Macro/MF/
Intelligent Auto/
Motion Picture
3 cm (0.098 feet) (Wide)/1 m (3.3 feet) (Tele) to ¶
Shutter system Electronic shutteriMechanical shutter
Minimum Illumination Approx. 9 lx (when i-Low light is used, the shutter speed is
1/30th of a second)
Shutter speed
Still picture B (Bulb) (Max. approx. 120 second),
60 to 1/4000th seconds (with the mechanical shutter)
1 to 1/16000th seconds (with the electronic shutter)
Motion picture 1/25th seconds to 1/16000th of a second
(when [FHD/24M/24p] in [AVCHD] is set)
1/2th seconds to 1/16000th of a second
(when [M] is selected in Creative Video Mode, MF)
1/30th seconds to 1/16000th of a second (other than the above)
Exposure (AE)
Program AE (P)/Aperture-priority AE (A)/Shutter-priority AE (S)/
Manual exposure (M)/AUTO
Light metering mode Multiple/Center weighted/Spot
Monitor 3.0q Monitor (3:2) (Approx. 920,000 dots)
(field of view ratio about 100%)
DMC-FZ1000_PPC_eng.book 84 ページ ２０１４年５月３０日 金曜日 午後５時９分
85
Others
(ENG) SQT0196
Viewfinder OLED Live Viewfinder (4:3) (Approx. 2,360,000 dots)
(field of view ratio about 100%)
(with diopter adjustment j4 to i4 diopter)
Flash Built-in pop up flash
AUTO, AUTO/Red-Eye Reduction, Forced ON, Forced ON/
Red-Eye Reduction, Slow Sync., Slow Sync./Red-Eye
Reduction, Forced OFF
Microphone Stereo
Speaker Monaural
Recording media SD Memory Card/SDHC Memory Card
¢
/SDXC Memory Card
¢
(
¢ UHS-I UHS Speed Class 3)
Recording file format
Still Picture RAW/JPEG (based on “Design rule for Camera File system”,
based on “Exif 2.3” standard, DPOF corresponding)
Motion pictures AVCHD Progressive/AVCHD/MP4
Audio compression AVCHD Dolby
R
Digital (2 ch)
MP4 AAC (2 ch)
Interface
Digital “USB 2.0” (High Speed)
Analog video/audio NTSC
Audio line output (monaural)
Terminal
[MIC] ‰ 3.5 mm jack
[REMOTE] ‰ 2.5 mm jack
[AV OUT/DIGITAL] Dedicated jack (8 pin)
[HDMI] MicroHDMI Type D
Dimensions Approx. 136.8 mm (W)k98.5 mm (H)k130.7 mm (D)
[5.39q (W)k3.88q(H)k5.15q (D)]
Mass (weight) Approx. 831 g/1.83 lb (with card and battery)
Approx. 780 g/1.72 lb (excluding card and battery)
Operating temperature
0 oC to 40 oC (32 oF to 104 oF)
Operating humidity 10%RH to 80%RH
Language select [ENGLISH]/[ESPAÑOL](DMC-FZ1000P)
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/
[PORTUGUÊS]/[ITALIANO]/[繁體中文]/[¢]
(DMC-FZ1000PC)
SQT0196~Body3_eng.fm 85 ページ ２０１４年６月１６日 月曜日 午後３時２０分
86
Others
SQT0196 (ENG)
Wireless transmitter
NFC
Battery Charger (Panasonic DE-A79B):
Information for your safety
Equipment mobility:
Movable
Battery Pack (lithium-ion) (Panasonic DMW-BLC12PP):
Information for your safety
Compliance standard IEEE 802.11b/g/n (standard wireless LAN protocol)
Frequency range used
(central frequency)
2412 MHz to 2462 MHz (1 to 11ch)
Encryption method Wi-Fi compliant WPA
TM
/WPA2
TM
Access method Infrastructure mode
Compliance standard ISO/IEC 18092 NFC-F (Passive Mode)
Input: 110 V to 240 V, 50/60 Hz, 0.2 A
Output: 8.4 V, 0.65 A
Voltage/capacity: 7.2 V/1200 mAh
DMC-FZ1000_PPC_eng.book 86 ページ ２０１４年５月３０日 金曜日 午後５時９分
87
Others
(ENG) SQT0196
Digital Camera Accessory System
¢ The AC Adaptor (optional) can only be used with the designated Panasonic DC Coupler
(optional). The AC adaptor (optional) cannot be used by itself.
Product numbers correct as of June 2014. These may be subject to change.
•
Some optional accessories may not be available in some countries.
• NOTE: Accessories and/or model numbers may vary between countries. Consult your local
dealer.
Description Accessory#
Battery Pack DMW-BLC12
AC Adaptor
¢
DMW-AC10
DC Coupler
¢
DMW-DCC8
MC Protector DMW-LMCH62
ND Filter DMW-LND62
PL Filter (Circular Type) DMW-LPL62
Flash
DMW-FL360L, DMW-FL580L
LED Video Light VW-LED1
Stereo Shotgun Microphone DMW-MS2
Stereo Microphone VW-VMS10
Remote Shutter DMW-RSL1
USB connection Cable DMW-USBC1
AV Cable DMW-AVC1
DMC-FZ1000_PPC_eng.book 87 ページ ２０１４年５月３０日 金曜日 午後５時９分
88
Others
SQT0196 (ENG)
Reading the Owner’s Manual (PDF format)
• Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes
more detailed information.
More detailed instructions on the operation of this camera are contained in
“Owner’s Manual for advanced features (PDF format)” in the supplied DVD.
Install it on your PC to read it.
∫ For Windows
1
Turn the PC on and insert the DVD containing the Owner’s Manual
(supplied).
2
Click the [Owner’s Manual].
3
Select the desired language and then click
[Owner’s Manual] to install.
A To return to the install menu.
4
Double click the “Owner’s Manual”
shortcut icon on the desktop.
∫ When the Owner’s Manual (PDF format) will not open
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to browse or
print the Owner’s Manual (PDF format).
•
You can download and install a version of Adobe Reader that you can use with your OS from
the following Web Site.
http://get.adobe.com/reader/otherversions
∫ To uninstall the Owner’s Manual (PDF format)
Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder.
∫ For Mac
1
Turn the PC on and insert the DVD containing the Owner’s Manual
(supplied).
2
Open the “Manual” folder in the DVD.
• “Manual” folder is displayed again.
3
Open the “Manual” folder in the DVD and then copy the PDF file with
the desired language inside the folder.
4
Double click the PDF file to open it.
A
DMC-FZ1000_PPC_eng.book 88 ページ ２０１４年５月３０日 金曜日 午後５時９分
89
Others
(ENG) SQT0196
Digital Camera Accessory Order Form
(For USA Customers)
Ship To:
Mr.
Mrs.
Ms.
First Last
Street Address
City State Zip
Phone#:
Day
( )
Night
()
4. Shipping information (UPS delivery requires complete street address)
Please photocopy this form when placing an order.
3. Method of payment (check one)
American Express
VISA
MasterCard
(Please do not send cash)
2. Items Ordered
QuantityAccessory # Price EachDescription Total Price
$6.95
Subtotal
Your State & Local Sales Tax
Shipping & Handling
Tota l
1. Digital Camera Model #
Discover
Expiration Date
Credit Card #
Customer Signature
TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
YOU MAY CONTACT US DIRECTLY AT:
1-800-237-9080 (FAX ONLY)
OR
MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER
20421 84th Avenue South, Kent, WA 98032
DMC-FZ1000_PPC_eng.book 89 ページ ２０１４年５月３０日 金曜日 午後５時９分
90
Others
SQT0196 (ENG)
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase
(“warranty period”), at its option either (a) repair your product with new or refurbished
parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. This Limited Warranty excludes both
parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the United States. This
warranty is extended only to the original purchaser of a new product which was not sold
“as is”.
Product or Part Name Parts Labor
Digital Camera (DMC-FZ1000) 1 Year 1 Year
All included Accessories
(Except Non-Rechargeable Batteries)
90 Days Not Applicable
Only Non-Rechargeable Batteries 10 Days Not Applicable
DMC-FZ1000_PPC_eng.book 90 ページ ２０１４年５月３０日 金曜日 午後５時９分
91
Others
(ENG) SQT0196
Mail-In Service--Online Repair Request
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
www.panasonic.com/repair
.
When shipping the unit, carefully pack, include all supplied accessories listed in the
Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box.
When shipping Lithium Ion batteries please visit our Web Site at
www.panasonic.com/BatteryHandling
as Panasonic is committed to providing the most up
to date information. Include a letter detailing the complaint, a return address and provide a
daytime phone number where you can be reached. A valid registered receipt is required
under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL
BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE
INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED
WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred in shipment, or failures which are caused
by products not supplied by the warrantor, or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line
surge, lightning damage, modification, introduction of sand, humidity or liquids,
commercial use such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or other Authorized
Servicer, or damage that is attributable to acts of God.
DMC-FZ1000_PPC_eng.book 91 ページ ２０１４年５月３０日 金曜日 午後５時９分
92
Others
SQT0196 (ENG)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
WARRANTOR’S LIABILITY UNDER THIS LIMITED WARRANTY SHALL BE LIMITED
SOLELY TO THE COST OF ANY NECESSARY REPAIRS OR REPLACEMENTS OF THIS
PRODUCT. PANASONIC ASSUMES NO RISK, AND SHALL NOT IN ANY CASE BE
LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY
OTHER INDIRECT DAMAGES, ARISING FROM BREACH OF WARRANTY OR
CONTRACT, NEGLIGENCE, OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT
LIMITATION, LOSS OF GOOD WILL PROFITS OR REVENUE, COST OF CAPITOL, COST
OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES OR DOWNTIME COSTS,
OR CLAIMS OF ANY PART DEALING WITH PURCHASER FOR SUCH DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty
period, you may contact your dealer or Service Center. If the problem is not handled to
your satisfaction, then write to the warrantor’s Consumer Affairs Department at the
addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
As of April 2014
Customer Services Directory (United States)
Obtain Product Information and Operating Assistance; locate your nearest Dealer
or Service Center; purchase Parts and Accessories; or make Customer Service
and Literature requests by visiting our Web Site at:
http://www.panasonic.com/support
or, contact us via the web at:
http://www.panasonic.com/contactinfo
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States)
Purchase Parts, Accessories and Owner’s Manual online for all Panasonic Products by
visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
You may also contact us directly at:
1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
DMC-FZ1000_PPC_eng.book 92 ページ ２０１４年５月３０日 金曜日 午後５時９分
93
Others
(ENG) SQT0196
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and
workmanship under normal use and for a period as stated below from the date of original
purchase agrees to, at its option either (a) repair your product with new or refurbished
parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by Panasonic
Canada Inc.
This warranty is given only to the original purchaser, or the person for whom it was
purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized
Panasonic dealer in Canada and purchased and used in Canada, which product was not
sold “as is”, and which product was delivered to you in new condition in the original
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A
PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE,
SHOWING AMOUNT PAID AND PLACE OF PURCHASE
IS REQUIRED
Digital Camera One (1) year, parts and labour
Digital Camera Peripherals One (1) year, parts and labour
Digital Camera Accessories Ninety (90) days, parts and labour
DMC-FZ1000_PPC_eng.book 93 ページ ２０１４年５月３０日 金曜日 午後５時９分
94
Others
SQT0196 (ENG)
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred in shipment, or failures which are caused
by products not supplied by Panasonic Canada Inc., or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, improper batteries, power line surge, lightning damage, modification,
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant,
or other business or rental use of the product, or service by anyone other than a
Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries, printer ink cartridge and paper are also excluded from coverage under
this warranty.
Rechargeable batteries are warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As
examples, this warranty excludes damages for lost time, travel to and from the Authorized
Servicer, loss of or damage to media or images, data or other memory or recorded
content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages, or the exclusion of implied warranties, so the above limitations
and exclusions may not be applicable. This warranty gives you specific legal rights and
you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation, repairs and information assistance, please visit our Support
page:
www.panasonic.ca/english/support
DMC-FZ1000_PPC_eng.book 94 ページ ２０１４年５月３０日 金曜日 午後５時９分
95
Others
(ENG) SQT0196
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation, and/or
(3) open source software
The software categorized as (3) is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.
Please refer to the detailed terms and conditions thereof displayed by selecting [MENU/
SET] > [Setup] > [Version Disp.] > [Software info].
•
SDXC Logo is a trademark of SD-3C, LLC.
• “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive”
logo are trademarks of Panasonic Corporation and Sony
Corporation.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
• HDAVI Control™ is a trademark of Panasonic Corporation.
• Adobe is a trademark or registered trademark of Adobe
Systems Incorporated in the United States and/or other
countries.
• iMovie, Mac and Mac OS are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• iPad, iPhone, iPod, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.
• App Store is a service mark of Apple Inc.
DMC-FZ1000_PPC_eng.book 95 ページ ２０１４年５月３０日 金曜日 午後５時９分
• Windows and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• Android and Google Play are trademarks or registered
trademarks of Google Inc.
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-
Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi
Alliance.
• “Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and
“WPA2” are marks or registered marks of the Wi-Fi Alliance.
• DLNA, the DLNA Logo and DLNA CERTIFIED are
trademarks, service marks, or certification marks of the Digital Living Network Alliance.
• This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered
trademark of DynaComware Taiwan Inc.
• QR Code is a registered trademark of DENSO WAVE INCORPORATED.
• Other names of systems and products mentioned in these instructions are usually the
registered trademarks or trademarks of the manufacturers who developed the system or
product concerned.
This product is licensed under the AVC patent portfolio license for the personal and non-
commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC
Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained from a video provider licensed to provide
AVC Video. No license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, LLC. See http://www.mpegla.com
.
Printed in Japan
Two Riverfront Plaza, Newark, NJ 07102-5490
Panasonic Corporation of North America
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.com
http://www.panasonic.com
Panasonic Corporation 2014
DMC-FZ1000_PPC_eng.book 96 ページ ２０１４年５月３０日 金曜日 午後５時９分
