Loading ...
Loading ...
Loading ...
Owner’s Guide & Installation Instructions
45 / English
Troubleshooting
It continuously spins.
Remaining time does not
count down.
There may be an imbalance of load
in the drum.
The automatic spin correction system
might have been activated due to the
unbalanced distribution of the laundry
in the drum.
The laundry in the drum may be tangled
up too much. Laundry should be
rearranged and re-spun.
No spinning is performed when the
laundry is not evenly distributed in the
drum to prevent any damage to the
appliance and to its environment.
Excess foaming occurs.
Using excessive amount of
detergent.
Use the recommended amount of
HE detergent appropriate for water
hardness, soil level and amount of
laundry.
Not using HE detergent Use HE detergent.
Detergent may have been stored
improperly.
Store detergent in a cool and dry place.
Type of material being washed (lace
items will cause excessive foam due
to their meshed structure).
Reduce the amount of detergent for lace
items.
Washer is completely
full of suds/Suds coming
out of dispenser during
operation.
Not using HE detergent / Using
excessive amount of detergent
Push “Start/Pause/Cancel” button.
Mix 2 cups of water with 1-2
tablespoon of fabric softener and
pour it into detergent dispenser. Push
“ S t a r t / P a u s e / C a n c e l ” b u t t o n a g a i n .
Use proper amount of HE detergent next
time you operate the washer.
Load is still too soapy /
Washer is full of suds at
the end of program.
Not using HE detergent / Using
excessive amount of detergent
Do not unload the washer. Operate
a quick wash cycle (e.g. Delicates,
Wools) without any detergent. Add
1-2 tablespoon of fabric softener into
main wash compartment of detergent
dispenser during water intake.
Use proper amount of HE detergent next
time you operate the washer.
Load is still too wet at the
end of program.
Unbalance detection due to 1-2
small items in the drum (uneven
load distribution)
Add more laundry (e.g. a few additional
towels) to the drum and start a “Spin”
or “Spin&Drain” cycle.
Poor spinning results due to
not using HE detergent / using
excessive amount of detergent
Use proper amount of HE detergent.
Loading ...
Loading ...
Loading ...