Loading ...
Loading ...
Loading ...
Owner’s Guide & Installation Instructions
39 / English
User maintenance instructions
materials while cleaning the inner surface of the drum. Use soapy water with a damp cloth to wipe the
inner surface, then dry it and leave the door open to let inside dry properly.
Sanitary cycle with extra rinse option should be used for monthly cleaning of drum. To carry out this
procedure:
First be sure that the drum is empty.
Add 80ml of liquid chlorine bleach to the bleach container in the right compartment of the dispenser.
Selectsanitarycycle,closethedoorandpress“start/pause”button.Atthecompletionofcycle,leave
the door open for drying of drum interior.
Monthly cleaning of the washer is necessary for removal of bacteria and mold residues and prevention
of unwanted odor in wash drum.
Cleaning the outer cabinet and control panel
When necessary:
• Wipetheexteriorpanelsofyourwasherwithsoapywaterormilddetergent.Dryitwithasoftcloth.
• Useonlyasoftanddampclothtocleanthecontrolpanel.
C
CAUTION
Ò Never use a sponge or scrubbing material. These will damage the painted
and plastic parts.
Cleaning the water inlet strainers
There is a strainer at the end of each water inlet valve at the back side of the washer and also at the
end of each water inlet hose where they are connected to the faucets. These strainers prevent the
foreign substances and dirt in the water to enter into the washer. Strainers should be cleaned from
time to time.
• Closethewaterfaucets.
• Removethenutsofthewaterinlethosestocleanthesurfacesofthestrainersonthewaterinlet
valves with an appropriate brush.
• Ifthestrainersareverydirty,youcanpullthemoutbymeansofpliersandcleanthem.
• Takeoutthestrainersontheflatendsofthewaterinlethosestogetherwiththerubbersealsand
clean thoroughly under running water.
• Replacetherubbersealsandstrainerscarefullyandtightenthehosenutsbyhand.
Loading ...
Loading ...
Loading ...