WM77120 User Manual

Loading ...

32 / English

Front-Loading Automatic Washer

Selecting a Program and Operating Your Washer

Starting the Program

1.PressStart/Pause/Cancelbuttontostarttheprogram.

2. The start symbol which indicates that the program has started will light up.

3. The door locks and the door locked symbol will light up.

4. The Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program

has started from will light up.

Progress of program

The progress of a running cycle is shown through a number of symbols on the screen.

• At the beginning of each program step, the relevant symbol in the series of symbols will light up

and thus, at the end of the program, all symbols will remain lit up. The symbol that lights up at the

far right of the series of symbols indicates the step that is being carried out.

Soak

When“Soak”auxiliaryfunctionisselected,soaksymbolwilllightuptoindicatethebeginningofthis

wash step.

Main wash

Main wash symbol will light up to indicate that the main wash cycle has started.

Rinse

Rinse symbol lights up at the beginning of the rinse step.

Softener

Softener symbol lights up at the beginning of softener step.

Spin

Spinsymbolwilllightupatthebeginningofthefinalspin,during“Drain&Spin”specialprograms.

• If the washer is not spinning, the program may be in rinse hold mode or the automatic spin

correction system has been activated due to an excessive unbalanced distribution of laundry in the

washer.

Changing the selections after the program has started

The selected spin speed and program temperature fade out. An empty frame appears.

Whenthe“Programselection”buttonisbroughttotheappropriateposition,rpmandtemperaturedata

reappear.

Switching the washer to standby mode

Thewasherisswitchedtostandbymodebypressing“Start/Pause/Cancel”buttonmomentarily.The

Standby symbol which indicates the washer is in standby mode lights up and the start symbol that

shows the program has started and is still continuing fades out.

Selecting or canceling an auxiliary function in pause mode

Auxiliary functions can be cancelled or selected in accordance with the step the program is at.

Adding/removing laundry in pause mode

The door can be opened if the water level is suitable. The door locked symbol will light up until the

door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry

may be added / taken out by opening the door.

Loading ...

User Manual - Page 32