WM77120 User Manual

Loading ...

Owner’s Guide & Installation Instructions

11 / English

Installation Instructions

Allowable Clearances for Undercounter Installation

Thedimensionsarefortherecommendedspacing.Counterdepthshouldbe23.5-24.5”(60-62cm).

Custom undercounter installation – Washer only

Minimumcounterwidthshouldbe50”(127cm)forapairofBlombergwasher&dryer.

Customundercounterinstallation–Washer&Dryer

50Ó

(127 cm)

Allowable Clearances for Closet Installation

When installed in closet (washer only/washer dryer stacked) :

Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm)

Closet door ventilation requirement: A louver having minimum 23 in2 (148 cm2) air opening located at

3 in (7.62 cm) from the bottom of closet door.

Stacked Installation

You can stack your Blomberg washer and dryer (model no: DV 16540 NBL00) by using a special

stackingkit(PartNo.2967100100).Ifnecessary,consultyourdealerortechnicalserviceforsupplying

the stack kit. In stacked closet installation, following configuration is necessary:

A louver having minimum 23 in2 (148 cm2) air opening located at 3 in (7.62 cm) height from the

bottomofclosetdoor(forwasher)&Alouverofminimum46in2(297cm2)airopeninglocatedat3in

(7.62 cm) distance from the top of closet door (for dryer).

Removing packaging reinforcement

Tilt the washer to remove the packaging reinforcement. Remove the packaging reinforcement by

pulling the ribbon.

Loading ...

User Manual - Page 11