WM77120 User Manual

Loading ...

16 / English

Front-Loading Automatic Washer

Installation Instructions

• Besuretosecurethedrainhosetightlytothepipe(standpipe,drainpipe/edgeofthesink)witha

strap etc.

• Thehoseshouldbeplacedbetween16and39in.(40and100cm)fromthefloorlevel

• Ifyouhavefloordrainsystem,youcanplacethedrainhoseintheholelocatedonthefloor.

Installation Checklist

• Waterinlethosesandaccessorybagsmustberemovedfromthewashdrum.

• Transportation/shippingboltsmustberemoved.

• Washermustbeproperlyleveledbyusingtheadjustablefeet.

• Waterinlethosesareconnectedtothewaterfaucets,securedandcheckedforanyleaksby

turning on both faucets.

• Draininstallationisdoneproperlyanddrainhoseischeckedandsecuredtopreventanyflooding.

• Washerisconnectedthejunctionboxwhichispluggedtoaproperlygroundedlivemainsoutlet.

• Besurethatpoweroutlet,waterfaucetsanddrainoutletmustbealwaysaccessibletotheuser.

Transportation

Before you transport the washer, you should carry out the following:

1. Turn off both water faucets.

2. Before you disconnect the water inlet hoses, decrease the pressure inside hoses by turning on the

washerchoosinganywashprogram.AssoonastheStart/Pause/Cancelledstartsblinking,turnoff

the appliance. You may securely disconnect inlet hoses without any water gush.

3. Disconnect the drain hose and hang it on the back plate by inserting into the holder plastic

brackets.

4. Unplug the power cord and hang it on the back plate by inserting into the holder plastic brackets.

5. Remove bolt hole covers and reinstall shipping bolts to their places. You can apply the procedure in

chapter“Removingshipping bolts”inreversetoaccomplishthis.

6. Be sure that rubber bushes are properly located in holes and bolts are screwed back tightly for

secure transportation of the appliance.

Loading ...

User Manual - Page 16