WM77120 User Manual

Loading ...

40 / English

Front-Loading Automatic Washer

User maintenance instructions

Cleaning the drain pump filter

Filter system in your washer prevents solid items such as buttons, coins and fabric fibers clogging the

pump impeller during discharging of the washing water. Thus, a good water discharge is achieved and

the pump life is extended.

• Ifyourwasherfailstodrainthewater,thepumpfiltermaybeclogged.Youmayhavetocleanit

occasionally to prevent any clogging. Water must be drained completely to clean the pump filter.

In addition, water may have to be drained off completely in the following cases:

• beforetransportingtheappliance(e.g.whenmoving)

• whenthereisadangeroffrost

Inordertocleanthedirtyfilteranddischargethewater;

1- Disconnect or unplug the washer from the power supply.

WARNING

Ò There may be water at 158F (70°C) in the drum. Therefore, the filter must

be cleaned only after the inside water is cooled down to avoid hazard of

scalding.

2- Open the filter cap. The filter cap may be composed of one or two pieces according to the model of

your washer.

If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out

towards yourself.

If it is composed of one piece, hold it from both sides and open it by pulling out.

3- An emergency drain hose is supplied with your washer.

Loading ...

User Manual - Page 40