WM77120 User Manual

Loading ...

Owner’s Guide & Installation Instructions

27 / English

Selecting a Program and Operating Your Washer

• Quick Wash

This program is used to wash a few very lightly soiled and unstained cotton, synthetics or blended

items in a short time. e.g.: daily clothes that have been used only once.

• Jogging Wear

This program is used to wash half capacity of normally or lightly soiled daily cotton, synthetics or

blended clothes. e.g.: daily clothes and sportswear that have been used only once.

• Jeans

This programme is used to wash half capacity of normally or lightly soiled jeans and denim jackets.

Turnyourjeansorjacketsinsideoutbeforewashing.Youshouldn’twashmorethanfourpairatatime,

this may cause an unbalanced load in the washer.

Special programs

For specific applications, select any of the following programs:

• Rinse

This cycle is used when you want to rinse separately.

• Drain & Spin

This program is used to discharge the water and spin dry the load with selected spin speed.

Spin&Drainmaybeselectedasoneprograminthismodel.

CAUTION

Ò You should select a lower spin speed for delicate wash items.

Temperature selection

Whenever a new program is selected, the temperature anticipated for that program appears on the

temperature indicator.

To change the temperature, press the temperature button. There are four temperature options being

cold,warm,hot and extra hot. Temperature selectability depends on the type of wash cycle.

Whenthe“Temperature”buttonispressedafterColdisselected,themaximumtemperatureofthe

program you have selected will be displayed.

Todecreasethetemperature,pressthe“Temperature”buttonagain.

Spin Speed selection

Whenever a new program is selected, the maximum spin speed of the selected program is displayed

on the spin speed indicator.

Todecreasethespinspeed,pressthe“Spin”button.Spinspeeddecreasesgradually.Then,rinsehold

and no spin options are shown respectively.

You can use no spin function in order to drain the water without spinning at the end of the program.

Loading ...

User Manual - Page 27