LV-8300 User Manual

Loading ...

. Usng On-Screen Menu

❽

Menu Descriptions & Functions [Reset]

Resettng settngs and adjustments [Reset]

The Reset feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except

the following:

Clearng adjustments and settngs for the current sgnal [Current sgnal]

Resets the adjustments for the current signal to the factory preset levels.

The items that can be reset are: [Image mode], [Brightness], [Contrast], [Sharpness], [Color level], [Color balance],

[Aspect], [Horizontal position], [Vertical position], [Clock], [Tracking], [Video lter], and [Overscan].

Clearng all the adjustments and settngs [All data]

Reset all the adjustments and settings for all the signals to the factory preset.

All items can be reset EXCEPT [Language], [No signal screen], [Filter message], [Password], [Communication

speed], [Standby mode], [Fan mode], [Remaining lamp time], [Lamp counter], [Filter counter], and [Network set-

tings].

Clearng Networkng Settngs [Network settngs]

Returns [DHCP], [IP ADDRESS], [SUBNET MASK], and [GATEWAY] to the default settings.

Clearng Lamp Hour Meter [Lamp counter]

Resets the lamp clock back to zero. Selecting this option displays submenu for a conrmation. Select [Yes] and

press the OK button.

NOTE:Elapsed time of the lamp use will not be affected even when [Reset] is done from the menu.

NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after

the lamp has reached the end of its life. If this happens, press the INFO button on the remote control for ten seconds to reset

the lamp clock back to zero. Do this only after replacing the lamp.

NOTE: Resetting the lamp counter before or without replacing the lamp will not display the exact lamp usage hours. Using the

lamp beyond its service life may cause the lamp to break. Be sure to reset the lamp counter after replacing the lamp.

Clearng the Flter Usage Hours [Flter counter]

Resets the lter usage back to zero. Selecting this option displays submenu for a conrmation. Select [Yes] and

press the OK button.

NOTE: Elapsed time of the ﬁlter use will not be affected even when [Reset] is done from the menu.

Loading ...

User Manual - Page 75