LV-8300 User Manual

Loading ...

6

. Usng On-Screen Menu

[Input sgnal select]

Selectng Sgnal Format

[Computer 1], [Computer 2 (Analog)]

Allows you to choose [Computer 1] or [Computer 2 (Analog)] for an RGB source such as a computer, or [COM-

PONENT] for a component video source such as a DVD player. Normally select [RGB/COMPONENT] and the

projector automatically detects a component signal. However there may be some component signals that the

projector is unable to detect. If this is the case, select [COMPONENT].

[VIDEO & S-VIDEO System Select]

This feature enables you to select composite video standards automatically or manually.

Normally select [Auto] and the projector will automatically detect the video standard.

In the case where the projector has difculty detecting the video standard, select the appropriate video stan-

dard from the menu.

This must be done for VIDEO and S-VIDEO respectively.

Enablng or Dsablng WXGA Mode [WXGA mode]

Selecting [On] will give priority to a WXGA (1280 x 768) signal in recognizing an input signal.

When [WXGA mode] is set to [On], an XGA (1024 x 768) signal may not be recognized on LV-7375, LV-7370 or

LV-7275. In this case, select [Off].

Enablng the denterlace [Progressve]

Turns on or off the deinterlace function for a telecine signal.

Off ......................... Select this option if there is any jitter or artifacts in video.

On .......................... Default standard setting.

NOTE: This feature is not available for RGB and HDTV signals.

Enablng Key Sound and Error Sound [Beep]

This feature turns on or off the keypad sound or alarm when a button on the cabinet and the remote control is

pressed or an error occurs.

[Options (2)]

Settng Off Tmer [Off tmer]

You can use the Off Timer feature to turn off the projector automatically at a preset time.

Eight preset times can be selected:Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00.

Selectng Power-savng n [Standby mode]

The projector has two standby modes: [Normal] and [Power-saving].

The Power-saving mode is the mode that allows you to put the projector in the power-saving condition which con-

sumes less power than the Normal mode. The projector is preset for Normal mode at the factory.

Loading ...

User Manual - Page 71