Loading ...
Loading ...
Loading ...
7
. Projectng an Image (Basc Operaton)
Selecting Default Source
You can set a source as the default source so that it will be displayed each time the projector is turned on.
1. Press the MENU button.
2. Press the
button twice to select [Setup] and press the button or the OK button to select [General].
3. Press the
button four times to select [Options (2)].
4. Press the
button six times to select [Default Source Select] and press the OK button.
5. Select a source as the default source, and press the OK button.
6. Press the BACK button a few times to close the menu.
7. Restart the projector.
TIP: When the projector is in Standby mode, applying a computer signal from a computer connected to the ANALOG IN-1 input
will power on the projector and simultaneously project the computer’s image. ([Direct power on (Comp1)] See page 63.)
Loading ...
Loading ...
Loading ...