Loading ...
Loading ...
Loading ...
42
Wireless
®
8
Connect the new Caséta® Wireless switch
9
Mount the Caséta® Wireless switch
10
Attach the wallplate
‘snap’
Wallplate
Adapter
Wallplate
Tagged wire
Location 1
Location 1
Location 1
6
Tag and disconnect wires from the existing switch
7
Remove side sections (if necessary)
Different
Color Screw
Ground
(Green / Bare Copper)
Place tag - to identify wire on
different color screw
Location 1
Multi-Location Installation - Caséta® Wireless In-Wall Switch with Pico® Remote Controls
Do not remove outside side sections
on switches at the end of gang.
Each switch has inside
side sections removed.
Switch in the middle has
all side sections removed.
When installing more than one Caséta® Wireless switch in the same
wallbox, it is necessary to remove inner side sections prior to wiring. See
image and chart below for more information.
Important note:
Removing side sections reduces the switch’s maximum wattage
rating. See the chart below for maximum wattage information.
B
B B
C
B
A
PD-5WS-DV (120 V~)
LED 5 A 4 A 3 A
Halogen/incandescent 600 W 450 W 350 W
Electronic Low-Voltage 600 W 450 W 350 W
Magnetic Low-Voltage
1
600 VA / 475 W 450 VA / 350 W 350 VA / 275 W
Fluorescent
2
5 A 4 A 3 A
General Purpose Fan 3 A 3 A 3 A
PD-5WS-DV (277 V~)
LED 5 A 4 A 3 A
Halogen/incandescent 1350 W 1100 W 800 W
Electronic Low-Voltage 1350 W 1100 W 800 W
Magnetic Low-Voltage
1
1350 VA / 1075 W 1100 VA / 875 W 800 VA / 625 W
Fluorescent
2
5 A 4 A 3 A
A
B C
A
B C
1
The maximum lamp wattage is determined by the efficiency of the transformer, with
70% – 85% as typical. For actual transformer efficiency, contact either the fixture or
transformer manufacturer. The total VA rating of the transformer(s) shall not exceed the VA
rating of the in-wall switch.
2
The in-wall switch is ULR Listed for use with all magnetic and electronic fluorescent ballasts.
Black
Blue
Black
Ground
(Green Wire)
Loading ...
Loading ...
Loading ...