Owner's Manual - Page 62

For 2020 SUBARU CROSSTREK.

Loading ...
Loading ...
Loading ...
(60,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
& Where to place a child re-
straint system
S01AG01
The following are SUBARU’s recommen-
dations on where to place a child restraint
system in your vehicle.
WARNING
. Several types of child restraint
systems may conceal the buckle
of the neighboring seat. If the
occupant of the neighboring seat
cannot correctly fasten the seat-
belt, that person must move to a
different seat. If the seatbelt can-
not be correctly fastened, there is
the risk of serious injury or death
in the event of sudden braking or
a collision.
. If the child restraint system can-
not be correctly installed be-
cause it contacts the drivers
seat, move the child restraint
system to a different seat. If it
cannot be installed in a different
seat (other than the drivers seat),
adjust the front seat so that
contact does not occur.
A: Front passengers seat
You should not install a child restraint
system (including a booster seat) due to
the hazard to children posed by the
passenger’s airbag.
B: Rear seat, window-side seating
positions
Recommended positions for all types of
child restraint systems.
In these positions, the following equipment
is provided for installing a child restraint
system.
. Automatic Locking Retractor/Emer-
gency Locking Retractor (ALR/ELR) seat-
belts
. Lower anchorages (bars)
. Upper anchorages (tether anchorages)
Some types of child restraint systems not
be able to be secured firmly due to
projection of the seat cushion.
In this seating position, you should use
only a child restraint system that has a
bottom base that fits snugly against the
contours of the seat cushion and can be
securely retained using the seatbelt.
C: Rear seat, center seating position
The ALR/ELR seatbelt and an upper
anchorage (tether anchorage) are pro-
vided in this position.
Some types of child restraint systems not
be able to be secured firmly due to
projection of the seat cushion.
In this seating position, you should use
only a child restraint system that has a
bottom base that fits snugly against the
contours of the seat cushion and can be
securely retained using the seatbelt.
When you install a child restraint system in
the rear seat’s center seating position,
raise the center head restraint.
Lower anchorages (bars) for window-side
seating positions may be used for a seat in
the center seating position if a child
restraint system manufacturers instruc-
tions permit and specify using anchors as
far apart as those in this vehicle.
If a child restraint system is not correctly
fixed in place (for example, if a child
Seat, seatbelt and SRS airbags/Child restraint systems
1-28
Loading ...
Loading ...
Loading ...