2020 SUBARU CROSSTREK Owner's Manual

Loading ...

(274,1)

北米Model "A1370BE-B" EDITED: 2019/ 11/ 12

! MT models

S07BD0101

1. Apply the parking brake.

2. Turn off unnecessary lights and acces-

sories.

3. Depress the clutch pedal to the floor

and shift the shift lever into neutral. Hold

the clutch pedal to the floor while starting

the engine.

The starter motor will only operate when

the clutch pedal is depressed fully to the

floor.

4. Turn the ignition switch to the “ON”

position and check the operation of the

warning and indicator lights. Refer to

“Warning and indicator” F3-12.

5. Turn the ignition switch to the “START”

position without depressing the accelera-

tor pedal. Release the key immediately

after the engine has started.

If the engine does not start, try the

following procedure.

(1) Turn the ignition switch to the

“LOCK”/“OFF” position and wait for at

least 10 seconds. After checking that

the parking brake is firmly set, turn the

ignition switch to the “START” position

while depressing the accelerator pedal

slightly (approximately a quarter of the

full stroke). Release the accelerator

pedal as soon as the engine starts.

(2) If this fails to start the engine, turn

the ignition switch back to the “LOCK”/

“OFF” position and wait for at least 10

seconds. Then fully depress the accel-

erator pedal and turn the ignition

switch to the “START” position. If the

engine starts, quickly release the ac-

celerator pedal.

(3) If this fails to start the engine, turn

the ignition switch again to the “LOCK”/

“OFF” position. After waiting for 10

seconds or longer, turn the ignition

switch to the “START” position without

depressing the accelerator pedal.

(4) If the engine still fails to start,

contact your nearest SUBARU dealer

for assistance.

6. Confirm that all warning and indicator

lights have turned off after the engine has

started. The fuel injection system auto-

matically lowers the idle speed as the

engine warms up.

! CVT models

S07BD0104