Loading ...
Loading ...
Loading ...
(328,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
with a low body height such as
sports cars or a trailer with no
cargo)
– Vehicles that are not approaching
your vehicle even though they are in
the detection area (either on a
neighboring lane to the rear or be-
side your vehicle when reversing)
(The system determines the pre-
sence of approaching vehicles
based on data detected by the radar
sensors.)
– Vehicles traveling at significantly
different speeds
– Vehicles driving in parallel at al-
most the same speed as your vehi-
cle for a prolonged time
– Oncoming vehicles
– Vehicles in a lane beyond the
neighboring lane
– Vehicles travelling at a signifi-
cantly lower speed that you are
trying to overtake
. On a road with extremely narrow
lanes, the system may detect vehicles
driving in a lane next to the neighboring
lane.
. When the 8-inch audio/navigation
system is performing a software up-
date, the RCTA warning icons may not
be displayed on the audio/navigation
screen until the update is complete.
& BSD/RCTA approach indica-
tor light/warning buzzer
S07BM03
When the BSD/RCTA is active, the BSD/
RCTA approach indicator light will operate
to alert the driver when there are vehicles
in the neighboring lanes. When reversing
the vehicle, the BSD/RCTA approach
indicator light and warning buzzer will
operate to alert the driver that a vehicle is
approaching from the left or right side.
! BSD/RCTA approach indicator light
S07BM0301
BSD/RCTA approach indicator light
It is mounted in each side of the outside
mirrors.
The indicator light will illuminate when a
vehicle approaching from behind is de-
tected.
The indicator light will flash to warn the
driver of dangers under the following
conditions.
. While the indicator light illuminates, if
you operate the turn signal lever toward
the side in which this light turned on.
. When reversing the vehicle while the
system detects a vehicle approaching
from either side.
! BSD/RCTA approach indicator
light dimming function
S07BM030101
When the headlights are turned on, the
brightness of the BSD/RCTA approach
indicator light will be reduced.
NOTE
. You may have difficulty recognizing
the BSD/RCTA approach indicator light
under the following conditions.
– When affected by direct sunlight
– When affected by the headlight
beams from the vehicles behind
. While the illumination brightness
control dial is in the fully upward
position, even if the headlights are
turned on, the brightness of the BSD/
RCTA approach indicator light will not
be reduced. For details about the
illumination brightness control dial,
refer to “Illumination brightness con-
trol” F3-12.
Starting and operating/BSD/RCTA
7-64
Loading ...
Loading ...
Loading ...