Loading ...
Loading ...
Loading ...
(115,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
or “ ” button on the access key fob.
Then, start over from the procedure
described in “Preparation for register-
ing a PIN code”.
. To protect your vehicle from theft,
you cannot register a string of the same
five numbers together, such as
“00000”, nor “12345” as a PIN code.
. Do not register your vehicle license
plate number or simple numbers such
as “11122” or “12121” as a PIN code.
Doing so will increase the risk of
vehicle theft.
. When you try to register “22222”, the
registered PIN code will be deleted. You
cannot unlock the doors by PIN Code
Access until a new code is registered.
. After registering a new PIN code,
make sure that you can unlock the
doors using the PIN code.
. The PIN code cannot be deleted
while the keyless access function is
disabled by operating the access key
fob.
. Reregister the PIN code in the fol-
lowing case.
– When you forget the PIN code
– When you want to change the PIN
code
! Unlocking
S02AP2103
Perform steps 1 to 5 described in “Regis-
tration for a PIN code”.
NOTE
. You cannot unlock by PIN Code
Access in the following cases.
– The access key fob is within the
operating ranges.
– The ignition switch is in the
“ACC” or “ON” position.
. If you make an operation error dur-
ing the unlocking procedure, start over
with the unlocking procedure after
waiting for 5 seconds or longer.
. To protect your vehicle from theft, a
buzzer will sound if incorrect PIN codes
are entered five times continuously. If
this occurs, you cannot unlock the
doors by PIN Code Access for 5
minutes.
& Power saving function
S02AP23
The keyless access function will be dis-
abled in the following cases to protect the
access key fob battery and the vehicle
battery.
. Case 1: When the keyless access
function and the remote keyless entry
system have not been used for 2 weeks
or longer while all doors are locked
Operate one of the following items to
recover the keyless access function:
– Unlock the doors by operating any
procedure other than gripping the front
passenger’s door handle.
– Lock the doors.
– Open a door and then close it.
. Case 2: When the access key fob has
been left in the operating range for 10
minutes or longer while all doors are
locked
Operate one of the following items to
recover the keyless access function:
– Unlock the doors by gripping the
door handle.
– Unlock the doors by pressing the
rear gate opener button.
– Lock the doors by touching the door
lock sensor.
– Lock or unlock the doors by using
the remote keyless entry system.
– Lock or unlock the doors by using
the power door locking switch.
– Open either of the front doors.
– CONTINUED –
Keys and doors/Keyless access with push-button start system
2-11
2
Loading ...
Loading ...
Loading ...