Loading ...
Loading ...
Loading ...
(240,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
Defrosting
S04AH
Select the “ ” or “ ” mode to defrost or
dehumidify the windshield and front door
windows.
NOTE
. When the “ ” or “ ” mode is
selected, the air conditioner compres-
sor operates automatically regardless
of the position of the air conditioner
button to defrost the windshield more
quickly. However the indicator on the
air conditioner button may not illumi-
nate. At the same time, the air inlet
selection is automatically set to the
outside air mode.
For type A climate control system, in
this state:
– You cannot stop the air condi-
tioner compressor by pressing the
air conditioner button.
– You cannot select the recircula-
tion mode by pressing the air inlet
selection button.
. For types B and C climate control
system, after defrosting the windshield
by pressing the defroster button “
”,
pressing the button again returns the
system to the setting that had been
selected before the defroster was acti-
vated.
Operating tips for heater and
air conditioner
S04AD
& Cleaning ventilation grille
S04AD01
1) Front ventilation inlet grille
Always keep the front ventilation inlet grille
free of snow, leaves, or other obstructions
to ensure efficient heating and defrosting.
Since the condenser is located in front of
the radiator, this area should be kept clean
because cooling performance is impaired
by any accumulation of insects and leaves
on the condenser.
& Efficient cooling after parking
in direct sunlight
S04AD02
After parking in direct sunlight, drive with
the windows open for a few minutes to
Climate control/Defrosting
4-10
Loading ...
Loading ...
Loading ...