Owner's Manual - Page 208

For 2020 SUBARU CROSSTREK.

Loading ...
Loading ...
Loading ...
(206,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
using the remote keyless entry system.
The lights will remain illuminated for 30
seconds*
1
and then turn off. However, if
any of the following operations is done, the
light will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
. The ignition switch is turned to the “ON”
position.
When exiting:
While the welcome lighting function is
activated, the low beam headlights, park-
ing lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights will remain illuminated even when
either of the following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The lights will turn off under any of the
following conditions.
. 3 minutes have passed since the light
were illuminated by the welcome lighting
function.
. 30 seconds have passed since the door
is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
lights remain on by the welcome lighting
function can be changed by a SUBARU
dealer. Contact your SUBARU dealer for
details.
! Sensor for the auto on/off head-
lights (if equipped)
S03AH0101
The sensor is on the instrument panel as
shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
& High/low beam change (dim-
mer)
S03AH02
1) High beam
2) Low beam
When the headlights are on high beam, the
high beam indicator light
on the
combination meter is also on.
Instruments and controls/Light control switch
3-68
Loading ...
Loading ...
Loading ...