Loading ...
Loading ...
Loading ...
(204,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
! Models with navigation system
S03AF0201
The clock will be set automatically where a
GPS signal is available.
! Models without navigation system
S03AF0202
The clock will be set and adjusted auto-
matically when a smartphone is connected
via Bluetooth
®
for transferring phonebook
data.
1. Register the smartphone to the audio
system. For details, refer to “Bluetooth
SETTINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
2. Transfer phonebook data to the sys-
tem. For details, refer to “Bluetooth SET-
TINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
The clock will be adjusted automatically.
NOTE
Depending on the model of smart-
phone, the settings of the connected
smartphone may need to be changed.
(ex: For iOS or other models, notifica-
tion settings may need to be activated.)
For details, check the instructions on
connecting smartphones.
& Regulatory information
S03AF04
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc.
Light control switch
S03AH
& Precautions and tips
S03AH06
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the lights are turned off.
If the vehicle is left unattended
for a long time with the lights
illuminated, the battery may be
discharged.
NOTE
. Even if the key is removed from the
ignition switch, the lights can be illumi-
nated by operating the light control
switch from the “
” (off) position to the
“
” or “ ” position (models without
“keyless access with push-button sys-
tem”).
. Even if the push-button ignition
switch is turned off, the lights can be
illuminated by operating the light con-
trol switch from the “
” (off) position to
the “
” or “ ” position (models with
“keyless access with push-button start
Instruments and controls/Light control switch
3-66
Loading ...
Loading ...
Loading ...