Owner's Manual - Page 108

For 2020 SUBARU CROSSTREK.

Loading ...
Loading ...
Loading ...
(106,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
Keys
S02AA
NOTE
For models with “keyless access with
push-button start system”, refer to
“Keyless access with push-button start
system” F2-2.
The following keys are provided with the
vehicle.
1) Master key (Main)
2) Master key (Sub)
3) Sub key
4) Key number plate
A key can be used in the following
locations.
. Ignition switch
. Drivers door
. Glove box
NOTE
Locking/unlocking using the remote
keyless entry system can also be con-
trolled with the buttons on the key. For
detailed information, refer to “Remote
keyless entry system” F2-17.
CAUTION
Do not attach a large key holder or
key case to either key. If it bangs
against your knees while you are
driving, it could turn the ignition
switch from the “ON” position to
the “ACC” or “LOCK” position,
thereby stopping the engine.
& Key number plate
S02AA01
The key number is stamped on the key
number plate attached to the key set. Write
down the key number and keep it in
another safe place, not in the vehicle. This
number is needed to make a replacement
key if you lose your key or lock it inside the
vehicle. Refer to “Key replacement” F2-
15.
Keyless access with push-
button start system (if
equipped)
S02AP
The following access key fobs are pro-
vided with the vehicle.
1) Access key fob (main)
2) Access key fob (sub)
3) Key number plate
The keyless access with push-button start
system allows you to perform the following
functions when you are carrying the
access key fob.
. Locking and unlocking of the doors and
rear gate. Refer to “Locking and unlocking
by holding the access key fob” F2-6.
. Starting and stopping the engine. For
detailed information, refer to “Starting and
Keys and doors/Keys
2-2
Loading ...
Loading ...
Loading ...