Loading ...
Loading ...
Loading ...
(134,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
not initialized, the one-touch auto up/
down function will not operate. Refer to
“Initialization of power window with
one-touch auto up/down function”
F2-30.
! Anti-entrapment function (windows
with one-touch auto up/down func-
tion)
S02AH0703
While closing the window automatically, if
the window senses a substantial enough
object trapped between the window and
the window frame, it automatically moves
down slightly and stops.
If a foreign object is caught while the
window is opening automatically, the
window will stop.
CAUTION
. Never attempt to test this func-
tion using fingers, hands or other
parts of your body.
. The anti-entrapment function
may not operate properly if some
object gets trapped just before
the window fully closes.
NOTE
. If a window detects an impact similar
to that caused by trapping an object (for
example, when the vehicle encounters
a deep pothole), the anti-entrapment
function may operate.
. The window cannot be operated for a
few seconds after the anti-entrapment
function operates.
! Off delay function (windows with
one-touch auto up/down function)
S02AH0705
The front windows can be operated for
approximately 40 seconds even after the
ignition switch is turned to the “ACC” or
“OFF” position. If a front door is opened
within 40 seconds, the off delay function is
canceled.
! Locking the passengers’ windows
S02AH0704
1) Lock
2) Unlock
When the lock switch is in the lock position,
the rear windows cannot be operated by
the driver’s side switches. The passen-
ger’s side switches and the rear seat side
switches are not operational either.
When the indicator on the window
switches does not illuminate, the window
switch cannot be operated.
& Initialization of power window
with one-touch auto up/down
function
S02AH06
If the power window automatic function
(one-touch auto up and down function)
does not operate properly, operate each
window according to the following proce-
dure in order to initialize the power window
system.
1. Close the door.
2. Turn the ignition switch to the “ON”
position.
3. Open the window completely and then
press and hold down the power window
switch for approximately 1 second.
4. Close the window completely and then
pull and hold the power window switch for
approximately 1 second.
Keys and doors/Windows
2-30
Loading ...
Loading ...
Loading ...